Load data for 9 x 57 Mauser + .358 | 150gr | Remington PSP Core-Lokt

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 150gr \| Remington PSP Core-Lokt
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	1.000" \| 25.4mm
Caliber:	9 x 57 Mauser load data
Case Length (l3):	2.236" \| 56.8mm
Cartridge Length (C.O.L.):	3.114" \| 79.1mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	64.2 Grains of Water \| 4.17 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B5196_C1243
Last updated:	2025-01-01

Load data for 46 loads in caliber 9 x 57 Mauser with .358 | 150gr | Remington PSP Core-Lokt bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	86%	36434	90%	**66	94%
Accurate 2015	<<locked>>	92%	36448	90%	**56	96%
Accurate 2495	<<locked>>	97%	33170	82%	**85	95%
Alliant AR-Comp	<<locked>>	96%	36187	89%	**28	98%
Alliant Reloder-10x	<<locked>>	89%	36419	90%	**69	97%
[Baschieri & Pellagri 106]*	<<locked>>	85%	35984	89%	**61	94%
[Hodgdon H322]*	<<locked>>	92%	36434	90%	**66	94%
[Hodgdon H335]*	<<locked>>	87%	36027	89%	**59	92%
Hodgdon TrailBoss	<<locked>>	96%	29501	73%	**98	100%
[IMR 3031]*	<<locked>>	97%	32387	80%	**17	93%
IMR 4198	<<locked>>	86%	35882	88%	**07	98%
Norma 200	<<locked>>	84%	36042	89%	**53	98%
[Norma 202]*	<<locked>>	97%	36143	89%	**72	92%
ReloadSwiss RS 14	<<locked>>	96%	29037	72%	**37	100%
[Rottweil R 901]*	<<locked>>	93%	36071	89%	**30	92%
[SNPE Vectan SP 10]*	<<locked>>	86%	36303	89%	**62	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	36521	90%	**84	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	32155	79%	**79	92%
[Somchem S335]*	<<locked>>	95%	36187	89%	**00	93%
Vihtavuori N120	<<locked>>	85%	36129	89%	**00	100%
Vihtavuori N130	<<locked>>	90%	36303	89%	**03	97%
Vihtavuori N133	<<locked>>	97%	36201	89%	**07	96%
[Vihtavuori N140]*	<<locked>>	97%	33837	83%	**77	91%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	30574	75%	**08	91%
[Accurate 2015]*	<<locked>>	81%	25672	63%	**57	91%
[Accurate 2495]*	<<locked>>	87%	23917	59%	**10	90%
[Alliant AR-Comp]*	<<locked>>	81%	23032	57%	**05	91%
[Alliant Reloder-10x]*	<<locked>>	81%	28471	70%	**66	94%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31517	78%	**43	92%
[Hodgdon H322]*	<<locked>>	85%	29602	73%	**79	90%
[Hodgdon H335]*	<<locked>>	83%	32140	79%	**54	90%
Hodgdon TrailBoss	<<locked>>	81%	23438	58%	**54	100%
[IMR 3031]*	<<locked>>	93%	28543	70%	**05	90%
IMR 4198	<<locked>>	81%	31140	77%	**82	96%
Norma 200	<<locked>>	81%	32343	80%	**57	97%
[Norma 202]*	<<locked>>	93%	31995	79%	**61	90%
ReloadSwiss RS 14	<<locked>>	81%	23235	57%	**93	100%
[Rottweil R 901]*	<<locked>>	89%	31937	79%	**25	90%
[SNPE Vectan SP 10]*	<<locked>>	83%	32314	80%	**57	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	32024	79%	**66	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	94%	29501	73%	**07	90%
[Somchem S335]*	<<locked>>	88%	29631	73%	**36	91%
Vihtavuori N120	<<locked>>	81%	32358	80%	**15	100%
[Vihtavuori N130]*	<<locked>>	81%	27224	67%	**67	93%
[Vihtavuori N133]*	<<locked>>	85%	25527	63%	**05	90%
[Vihtavuori N140]*	<<locked>>	94%	31169	77%	**12	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data