Load data for 9 x 57 Mauser + .357 | 150gr | Nosler Partition

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 150gr \| Nosler Partition
Manufacturer SKU:	44839
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.625" \| 15.9mm
Caliber:	9 x 57 Mauser load data
Case Length (l3):	2.236" \| 56.8mm
Cartridge Length (C.O.L.):	2.739" \| 69.6mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	64.2 Grains of Water \| 4.17 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B4163_C1243
Last updated:	2025-01-01

Load data for 44 loads in caliber 9 x 57 Mauser with .357 | 150gr | Nosler Partition bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	84%	35839	88%	**59	100%
[ADI AR 2219]*	<<locked>>	88%	36216	89%	**82	94%
Accurate 2015	<<locked>>	94%	36158	89%	**76	97%
[Accurate 2495]*	<<locked>>	97%	29573	73%	**13	94%
Alliant AR-Comp	<<locked>>	97%	35128	87%	**18	98%
Alliant Reloder-10x	<<locked>>	91%	36260	89%	**92	97%
Alliant Reloder-7	<<locked>>	83%	36143	89%	**20	98%
Baschieri & Pellagri 106	<<locked>>	87%	36535	90%	**84	95%
[Hodgdon H322]*	<<locked>>	93%	36216	89%	**82	94%
[Hodgdon H335]*	<<locked>>	89%	36303	89%	**79	92%
[Hodgdon H4198]*	<<locked>>	84%	36332	89%	**74	93%
Hodgdon TrailBoss	<<locked>>	96%	28514	70%	**91	100%
IMR 4198	<<locked>>	88%	35926	88%	**23	98%
Norma 200	<<locked>>	87%	36201	89%	**76	98%
ReloadSwiss RS 14	<<locked>>	96%	27978	69%	**31	100%
[Rottweil R 901]*	<<locked>>	96%	35737	88%	**49	92%
[SNPE Vectan SP 10]*	<<locked>>	88%	36521	90%	**89	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36042	89%	**84	92%
[Somchem S335]*	<<locked>>	97%	35578	88%	**03	93%
Vihtavuori N120	<<locked>>	87%	36463	90%	**30	100%
Vihtavuori N130	<<locked>>	93%	36434	90%	**30	97%
Vihtavuori N133	<<locked>>	97%	33881	83%	**71	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31908	79%	**61	99%
[ADI AR 2219]*	<<locked>>	82%	29428	72%	**92	90%
[Accurate 2015]*	<<locked>>	82%	23627	58%	**18	90%
[Accurate 2495]*	<<locked>>	91%	23815	59%	**30	90%
[Alliant AR-Comp]*	<<locked>>	82%	21712	53%	**75	90%
[Alliant Reloder-10x]*	<<locked>>	81%	26063	64%	**16	93%
Alliant Reloder-7	<<locked>>	81%	33576	83%	**57	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29588	73%	**10	92%
[Hodgdon H322]*	<<locked>>	87%	29428	72%	**92	90%
[Hodgdon H335]*	<<locked>>	85%	31981	79%	**67	90%
[Hodgdon H4198]*	<<locked>>	81%	33127	82%	**92	92%
Hodgdon TrailBoss	<<locked>>	81%	22423	55%	**47	100%
IMR 4198	<<locked>>	81%	29196	72%	**46	96%
Norma 200	<<locked>>	81%	29211	72%	**98	96%
ReloadSwiss RS 14	<<locked>>	81%	22046	54%	**83	100%
[Rottweil R 901]*	<<locked>>	92%	31459	77%	**41	90%
[SNPE Vectan SP 10]*	<<locked>>	84%	31691	78%	**61	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	92%	31546	78%	**79	90%
[Somchem S335]*	<<locked>>	90%	28514	70%	**26	90%
Vihtavuori N120	<<locked>>	81%	30066	74%	**85	99%
[Vihtavuori N130]*	<<locked>>	81%	25048	62%	**21	92%
[Vihtavuori N133]*	<<locked>>	87%	25237	62%	**21	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.