top of page

Load data for 9 x 57 Mauser + .357 | 125gr | Sierra JSP FN

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

9 x 57 Mauser + .357 | 125gr | Sierra JSP FN

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 125gr | Sierra JSP FN
Manufacturer SKU:
8310
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.532" | 13.5mm
Caliber:
9 x 57 Mauser load data
Case Length (l3):
2.236" | 56.8mm
Cartridge Length (C.O.L.):
2.646" | 67.2mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
64.2 Grains of Water | 4.17 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B5945_C1243
Last updated:
2025-01-01

Load data for 26 loads in caliber 9 x 57 Mauser with .357 | 125gr | Sierra JSP FN bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
90%
36289
89%
**09
99%
[Accurate 2015]*
<<locked>>
96%
32692
81%
**10
93%
[Alliant AR-Comp]*
<<locked>>
97%
29921
74%
**64
93%
Alliant Reloder-10x
<<locked>>
96%
36361
90%
**25
95%
Alliant Reloder-7
<<locked>>
88%
36085
89%
**49
96%
[Baschieri & Pellagri 106]*
<<locked>>
91%
36289
89%
**77
92%
Hodgdon TrailBoss
<<locked>>
96%
27195
67%
**46
100%
IMR 4198
<<locked>>
93%
36172
89%
**53
96%
Norma 200
<<locked>>
92%
35853
88%
**02
96%
ReloadSwiss RS 14
<<locked>>
96%
26469
65%
**85
100%
SNPE Vectan BA6 1/2
<<locked>>
85%
36013
89%
**76
100%
Vihtavuori N120 👍
<<locked>>
92%
36318
89%
**69
99%
[Vihtavuori N130]*
<<locked>>
97%
35447
87%
**20
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
26948
66%
**46
96%
[Accurate 2015]*
<<locked>>
92%
28340
70%
**76
90%
[Alliant AR-Comp]*
<<locked>>
93%
26397
65%
**36
90%
[Alliant Reloder-10x]*
<<locked>>
87%
26585
65%
**36
90%
[Alliant Reloder-7]*
<<locked>>
81%
28747
71%
**36
92%
[Baschieri & Pellagri 106]*
<<locked>>
88%
32822
81%
**95
90%
Hodgdon TrailBoss
<<locked>>
81%
21248
52%
**91
100%
[IMR 4198]*
<<locked>>
81%
25483
63%
**25
90%
[Norma 200]*
<<locked>>
81%
24308
60%
**54
90%
ReloadSwiss RS 14
<<locked>>
81%
20769
51%
**27
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
32024
79%
**94
100%
Vihtavuori N120
<<locked>>
81%
25556
63%
**64
96%
[Vihtavuori N130]*
<<locked>>
88%
27195
67%
**87
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page