top of page

Load data for 9 x 57 Mauser + .357 | 110gr | Impala LWFP KS

Recommended Powder(s): Vihtavuori N120

9 x 57 Mauser + .357 | 110gr | Impala LWFP KS

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 110gr | Impala LWFP KS
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.673" | 17.1mm
Caliber:
9 x 57 Mauser load data
Case Length (l3):
2.236" | 56.8mm
Cartridge Length (C.O.L.):
2.787" | 70.8mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
64.2 Grains of Water | 4.17 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B3005_C1243
Last updated:
2025-01-01

Load data for 20 loads in caliber 9 x 57 Mauser with .357 | 110gr | Impala LWFP KS bullet and 10 powders such as Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
89%
36216
89%
**46
97%
[Alliant Reloder-10x]*
<<locked>>
96%
36376
90%
**43
93%
[Alliant Reloder-7]*
<<locked>>
87%
36114
89%
**61
93%
Hodgdon TrailBoss
<<locked>>
96%
28195
69%
**73
100%
[IMR 4198]*
<<locked>>
92%
36143
89%
**71
94%
[Norma 200]*
<<locked>>
90%
35592
88%
**14
94%
ReloadSwiss RS 14
<<locked>>
96%
27818
68%
**16
100%
SNPE Vectan BA6 1/2
<<locked>>
84%
36318
89%
**23
100%
Vihtavuori N120 👍
<<locked>>
91%
36187
89%
**04
98%
[Vihtavuori N130]*
<<locked>>
97%
36347
90%
**58
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2207]*
<<locked>>
81%
28384
70%
**04
94%
[Alliant Reloder-10x]*
<<locked>>
90%
30850
76%
**76
90%
[Alliant Reloder-7]*
<<locked>>
81%
30589
75%
**97
91%
Hodgdon TrailBoss
<<locked>>
81%
22495
55%
**09
100%
[IMR 4198]*
<<locked>>
85%
29617
73%
**61
90%
[Norma 200]*
<<locked>>
83%
28210
69%
**84
90%
ReloadSwiss RS 14
<<locked>>
81%
22234
55%
**52
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
33011
81%
**48
100%
Vihtavuori N120
<<locked>>
81%
27180
67%
**25
95%
[Vihtavuori N130]*
<<locked>>
92%
31575
78%
**30
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page