Load data for 9 x 57 Mauser + .356 | 145gr | LOS HP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 145gr \| LOS HP
Bullet Weight:	145gr \| 9.4g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.650" \| 16.5mm
Caliber:	9 x 57 Mauser load data
Case Length (l3):	2.236" \| 56.8mm
Cartridge Length (C.O.L.):	2.764" \| 70.2mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	64.2 Grains of Water \| 4.17 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B3512_C1243
Last updated:	2025-01-01

Load data for 44 loads in caliber 9 x 57 Mauser with .356 | 145gr | LOS HP bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	35868	88%	**99	100%
[ADI AR 2219]*	<<locked>>	88%	36506	90%	**25	93%
Accurate 2015	<<locked>>	94%	35824	88%	**95	96%
[Accurate 2495]*	<<locked>>	97%	29182	72%	**30	93%
Alliant AR-Comp	<<locked>>	97%	34766	86%	**41	98%
Alliant Reloder-10x	<<locked>>	91%	35926	88%	**22	97%
Alliant Reloder-7	<<locked>>	83%	35897	88%	**53	97%
[Baschieri & Pellagri 106]*	<<locked>>	87%	36042	89%	**07	94%
[Hodgdon H322]*	<<locked>>	94%	36506	90%	**25	93%
[Hodgdon H335]*	<<locked>>	89%	36550	90%	**18	92%
[Hodgdon H4198]*	<<locked>>	84%	36042	89%	**00	93%
Hodgdon TrailBoss	<<locked>>	96%	28616	70%	**21	100%
IMR 4198	<<locked>>	88%	36245	89%	**69	98%
Norma 200	<<locked>>	88%	36506	90%	**18	98%
ReloadSwiss RS 14	<<locked>>	96%	28065	69%	**60	100%
[Rottweil R 901]*	<<locked>>	97%	36376	90%	**95	92%
[SNPE Vectan SP 10]*	<<locked>>	88%	36260	89%	**15	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36347	90%	**30	92%
[Somchem S335]*	<<locked>>	97%	35201	87%	**30	93%
Vihtavuori N120	<<locked>>	87%	36158	89%	**62	100%
Vihtavuori N130	<<locked>>	93%	36492	90%	**66	97%
[Vihtavuori N133]*	<<locked>>	97%	33678	83%	**97	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31966	79%	**00	99%
[ADI AR 2219]*	<<locked>>	84%	30893	76%	**74	90%
[Accurate 2015]*	<<locked>>	83%	24410	60%	**77	90%
[Accurate 2495]*	<<locked>>	92%	24787	61%	**98	90%
[Alliant AR-Comp]*	<<locked>>	83%	22437	55%	**31	90%
[Alliant Reloder-10x]*	<<locked>>	81%	25947	64%	**39	92%
Alliant Reloder-7	<<locked>>	81%	33373	82%	**87	96%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29414	72%	**36	91%
[Hodgdon H322]*	<<locked>>	89%	30893	76%	**74	90%
[Hodgdon H335]*	<<locked>>	87%	33489	82%	**40	90%
[Hodgdon H4198]*	<<locked>>	81%	32851	81%	**18	91%
Hodgdon TrailBoss	<<locked>>	81%	22568	56%	**77	100%
IMR 4198	<<locked>>	81%	28964	71%	**72	95%
Norma 200	<<locked>>	81%	29095	72%	**31	95%
ReloadSwiss RS 14	<<locked>>	81%	22220	55%	**13	100%
[Rottweil R 901]*	<<locked>>	94%	33301	82%	**17	90%
[SNPE Vectan SP 10]*	<<locked>>	86%	33156	82%	**36	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	93%	33199	82%	**51	90%
[Somchem S335]*	<<locked>>	92%	29979	74%	**98	90%
Vihtavuori N120	<<locked>>	81%	29805	73%	**08	99%
[Vihtavuori N130]*	<<locked>>	81%	25048	62%	**48	91%
[Vihtavuori N133]*	<<locked>>	88%	26107	64%	**74	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data