top of page

Load data for 9 x 57 Mauser + .356 | 123gr | LOS RN

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

9 x 57 Mauser + .356 | 123gr | LOS RN

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.356 | 123gr | LOS RN
Bullet Weight:
123gr | 8.0g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.580" | 14.7mm
Caliber:
9 x 57 Mauser load data
Case Length (l3):
2.236" | 56.8mm
Cartridge Length (C.O.L.):
2.695" | 68.4mm
Seated Depth:
0.121" | 3.1mm
Shank Seated Depth:
0.121" | 3.1mm
Case Capacity:
64.2 Grains of Water | 4.17 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B3508_C1243
Last updated:
2025-01-01

Load data for 26 loads in caliber 9 x 57 Mauser with .356 | 123gr | LOS RN bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
89%
36129
89%
**22
99%
[Accurate 2015]*
<<locked>>
96%
33083
81%
**30
92%
[Alliant AR-Comp]*
<<locked>>
97%
30153
74%
**81
93%
Alliant Reloder-10x
<<locked>>
95%
35897
88%
**22
95%
Alliant Reloder-7
<<locked>>
88%
36303
89%
**66
95%
[Baschieri & Pellagri 106]*
<<locked>>
91%
36376
90%
**00
91%
Hodgdon TrailBoss
<<locked>>
96%
27427
68%
**62
100%
IMR 4198
<<locked>>
92%
36376
90%
**69
96%
Norma 200
<<locked>>
92%
36245
89%
**22
96%
ReloadSwiss RS 14
<<locked>>
96%
26701
66%
**01
100%
SNPE Vectan BA6 1/2
<<locked>>
85%
36216
89%
**02
100%
Vihtavuori N120 👍
<<locked>>
92%
36332
89%
**92
99%
[Vihtavuori N130]*
<<locked>>
97%
36143
89%
**56
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
27499
68%
**82
96%
[Accurate 2015]*
<<locked>>
93%
29385
72%
**25
90%
[Alliant AR-Comp]*
<<locked>>
93%
27093
67%
**72
90%
[Alliant Reloder-10x]*
<<locked>>
87%
26861
66%
**56
90%
[Alliant Reloder-7]*
<<locked>>
81%
29037
72%
**66
92%
[Baschieri & Pellagri 106]*
<<locked>>
89%
33547
83%
**25
90%
Hodgdon TrailBoss
<<locked>>
81%
21553
53%
**04
100%
[IMR 4198]*
<<locked>>
82%
26252
65%
**57
90%
[Norma 200]*
<<locked>>
81%
24714
61%
**84
90%
ReloadSwiss RS 14
<<locked>>
81%
21074
52%
**44
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
32329
80%
**13
100%
Vihtavuori N120
<<locked>>
81%
25831
64%
**94
96%
[Vihtavuori N130]*
<<locked>>
89%
27876
69%
**26
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page