Load data for 9 x 18 (Ultra) + .357 | 135gr | Nosler Practical

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 135gr \| Nosler Practical
Manufacturer SKU:	44836
Bullet Weight:	135gr \| 8.7g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.557" \| 14.1mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.273" \| 6.9mm
Shank Seated Depth:	0.273" \| 6.9mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B4162_C1230
Last updated:	2025-01-01

Load data for 88 loads in caliber 9 x 18 (Ultra) with .357 | 135gr | Nosler Practical bullet and 44 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N 👍	<<locked>>	79%	22524	86%	**9	100%
ADI APS 350	<<locked>>	74%	22800	87%	**8	100%
ADI APS 450	<<locked>>	74%	20929	80%	**8	100%
ADI AS 30	<<locked>>	80%	20943	80%	**0	100%
ADI AS 50N	<<locked>>	81%	22249	85%	**9	100%
Accurate No. 2	<<locked>>	85%	23221	89%	**9	91%
Accurate Solo 1000	<<locked>>	80%	21712	83%	**7	100%
Accurate Solo 1250 👍	<<locked>>	94%	22698	87%	**2	99%
Alliant BULLSEYE	<<locked>>	80%	22481	86%	**2	95%
Alliant UNIQUE	<<locked>>	96%	22684	87%	**5	95%
Baschieri & Pellagri 100	<<locked>>	84%	21205	81%	**3	100%
Hodgdon Clays	<<locked>>	74%	22989	88%	**1	100%
Hodgdon HP38	<<locked>>	63%	22104	85%	**9	100%
[Hodgdon HS-6]*	<<locked>>	78%	22278	85%	**2	83%
[Hodgdon Longshot]*	<<locked>>	73%	21422	82%	**6	85%
Hodgdon Universal	<<locked>>	87%	22524	86%	**9	100%
Lovex S011	<<locked>>	70%	20813	80%	**0	99%
Lovex S020	<<locked>>	85%	21089	81%	**6	96%
Maxam CSB 1	<<locked>>	95%	21379	82%	**6	99%
Maxam CSB 2 👍	<<locked>>	97%	21089	81%	**8	100%
Maxam CSB 3	<<locked>>	87%	21147	81%	**6	100%
Maxam CSB 4	<<locked>>	84%	21567	83%	**0	100%
Maxam CSB 5	<<locked>>	76%	20827	80%	**0	100%
Ramshot Silhouette	<<locked>>	78%	22669	87%	**5	92%
[Ramshot True Blue]*	<<locked>>	73%	22452	86%	**2	86%
Ramshot Zip	<<locked>>	63%	21161	81%	**9	99%
ReloadSwiss RS 12	<<locked>>	84%	21132	81%	**2	100%
ReloadSwiss RS 20	<<locked>>	97%	21176	81%	**5	96%
Rottweil P 801	<<locked>>	76%	21379	82%	**6	100%
SNPE Vectan A0	<<locked>>	97%	23366	89%	**6	94%
SNPE Vectan BA 9	<<locked>>	85%	22771	87%	**9	98%
SNPE Vectan BA10	<<locked>>	69%	20914	80%	**8	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	97%	19551	75%	**3	82%
SNPE Vectan BA9 1/2	<<locked>>	87%	21857	84%	**9	99%
Somchem MP200	<<locked>>	84%	21306	82%	**9	92%
Somchem MS200	<<locked>>	90%	22611	87%	**6	96%
[Vihtavuori 3N37]*	<<locked>>	96%	20711	79%	**2	86%
Vihtavuori N310	<<locked>>	66%	21306	82%	**7	100%
Vihtavuori N320 👍	<<locked>>	85%	22220	85%	**9	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	13866	53%	**8	100%
Vihtavuori N330 👍	<<locked>>	91%	21872	84%	**8	100%
Vihtavuori N340	<<locked>>	93%	22843	88%	**5	95%
[Vihtavuori N350]*	<<locked>>	93%	18144	70%	**6	83%
Winchester 231	<<locked>>	70%	21161	81%	**9	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	62%	14214	54%	**8	96%
ADI APS 350	<<locked>>	62%	16766	64%	**2	100%
ADI APS 450	<<locked>>	62%	15940	61%	**5	100%
ADI AS 30	<<locked>>	63%	13721	53%	**9	100%
ADI AS 50N	<<locked>>	61%	13358	51%	**9	98%
[Accurate No. 2]*	<<locked>>	67%	13706	53%	**2	82%
[Accurate Solo 1000]²	<<locked>>	59%	12430	48%	**2	98%
Accurate Solo 1250	<<locked>>	64%	10515	40%	**6	90%
[Alliant BULLSEYE]*	<<locked>>	62%	13866	53%	**8	88%
[Alliant UNIQUE]*	<<locked>>	64%	10269	39%	**6	81%
[Baschieri & Pellagri 100]²	<<locked>>	59%	10863	42%	**9	95%
Hodgdon Clays	<<locked>>	62%	16897	65%	**2	100%
Hodgdon HP38	<<locked>>	60%	19667	75%	**3	99%
[Hodgdon HS-6]*	<<locked>>	75%	20334	78%	**9	82%
[Hodgdon Longshot]*	<<locked>>	65%	16143	62%	**4	80%
Hodgdon Universal	<<locked>>	60%	11197	43%	**9	92%
Lovex S011	<<locked>>	61%	15998	61%	**1	97%
[Lovex S020]*²	<<locked>>	59%	9848	38%	**3	84%
[Maxam CSB 1]*	<<locked>>	65%	10254	39%	**3	89%
Maxam CSB 2	<<locked>>	63%	8456	32%	**9	93%
Maxam CSB 3	<<locked>>	61%	10994	42%	**9	95%
Maxam CSB 4	<<locked>>	63%	12575	48%	**2	99%
Maxam CSB 5	<<locked>>	60%	13343	51%	**9	100%
[Ramshot Silhouette]*	<<locked>>	61%	13474	52%	**5	83%
[Ramshot True Blue]*	<<locked>>	64%	16607	64%	**4	81%
Ramshot Zip	<<locked>>	60%	18797	72%	**3	99%
ReloadSwiss RS 12	<<locked>>	62%	10994	42%	**1	99%
[ReloadSwiss RS 20]*	<<locked>>	66%	9718	37%	**3	81%
[Rottweil P 801]²	<<locked>>	59%	12981	50%	**5	100%
[SNPE Vectan A0]*	<<locked>>	69%	12241	47%	**2	84%
[SNPE Vectan BA 9]*	<<locked>>	60%	11661	45%	**6	88%
SNPE Vectan BA10	<<locked>>	63%	18260	70%	**1	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	93%	17651	68%	**0	80%
[SNPE Vectan BA9 1/2]*²	<<locked>>	59%	10675	41%	**3	89%
[Somchem MP200]*	<<locked>>	60%	10979	42%	**6	80%
[Somchem MS200]*	<<locked>>	63%	11516	44%	**9	85%
[Vihtavuori 3N37]*	<<locked>>	88%	16955	65%	**3	82%
Vihtavuori N310	<<locked>>	61%	18101	69%	**8	100%
Vihtavuori N320	<<locked>>	60%	10921	42%	**9	98%
Vihtavuori N32C Tin Star	<<locked>>	83%	10544	40%	**6	100%
[Vihtavuori N330]*²	<<locked>>	59%	9137	35%	**9	89%
[Vihtavuori N340]*	<<locked>>	62%	9790	37%	**9	81%
[Vihtavuori N350]*	<<locked>>	89%	16433	63%	**3	81%
Winchester 231	<<locked>>	62%	16650	64%	**7	98%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data