Load data for 9 x 18 (Ultra) + .357 | 110gr | Norma HP

Recommended Powder(s): ADI AP 70N, Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 110gr \| Norma HP
Manufacturer SKU:	69123
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.481" \| 12.2mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.197" \| 5.0mm
Shank Seated Depth:	0.197" \| 5.0mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B3893_C1230
Last updated:	2025-01-01

Load data for 88 loads in caliber 9 x 18 (Ultra) with .357 | 110gr | Norma HP bullet and 44 powders such as ADI AP 70N, Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N 👍	<<locked>>	74%	21915	84%	**96	99%
ADI APS 350	<<locked>>	69%	21350	82%	**2	100%
ADI APS 450	<<locked>>	72%	21263	81%	**5	100%
ADI AS 30	<<locked>>	81%	22771	87%	**24	100%
ADI AS 50N	<<locked>>	79%	22887	88%	**60	100%
Accurate No. 2	<<locked>>	80%	21611	83%	**40	90%
Accurate Solo 1000	<<locked>>	80%	22829	87%	**37	100%
Accurate Solo 1250	<<locked>>	89%	21828	84%	**73	99%
Alliant BULLSEYE	<<locked>>	76%	21756	83%	**99	95%
Alliant UNIQUE	<<locked>>	92%	22742	87%	**32	95%
Baschieri & Pellagri 100	<<locked>>	85%	23047	88%	**50	100%
Hodgdon Clays	<<locked>>	69%	21350	82%	**8	100%
Hodgdon HP38	<<locked>>	63%	23467	90%	**83	100%
[Hodgdon HS-6]*	<<locked>>	76%	22785	87%	**12	84%
[Hodgdon Longshot]*	<<locked>>	72%	22698	87%	**12	86%
Hodgdon Universal	<<locked>>	82%	21915	84%	**96	99%
Lovex S011	<<locked>>	72%	23467	90%	**60	100%
Lovex S020	<<locked>>	86%	23496	90%	**22	97%
Maxam CSB 1	<<locked>>	93%	22350	86%	**76	99%
Maxam CSB 2 👍	<<locked>>	94%	21727	83%	**22	100%
Maxam CSB 3	<<locked>>	88%	23279	89%	**83	100%
Maxam CSB 4	<<locked>>	82%	22568	86%	**56	100%
Maxam CSB 5	<<locked>>	77%	22989	88%	**24	100%
Ramshot Silhouette	<<locked>>	76%	23264	89%	**22	92%
[Ramshot True Blue]*	<<locked>>	72%	23409	90%	**19	87%
Ramshot Zip	<<locked>>	63%	22510	86%	**73	99%
ReloadSwiss RS 12	<<locked>>	82%	22481	86%	**25	100%
ReloadSwiss RS 20	<<locked>>	95%	22350	86%	**38	97%
Rottweil P 801	<<locked>>	75%	23018	88%	**93	100%
SNPE Vectan A0	<<locked>>	93%	23177	89%	**83	94%
SNPE Vectan BA 9	<<locked>>	83%	22887	88%	**70	98%
SNPE Vectan BA10	<<locked>>	71%	23496	90%	**1	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	96%	20755	80%	**56	83%
SNPE Vectan BA9 1/2	<<locked>>	85%	22829	87%	**93	99%
Somchem MP200	<<locked>>	84%	22640	87%	**09	93%
Somchem MS200	<<locked>>	88%	22858	88%	**99	96%
[Vihtavuori 3N37]*	<<locked>>	94%	22060	84%	**22	86%
Vihtavuori N310	<<locked>>	64%	21640	83%	**1	100%
Vihtavuori N320	<<locked>>	83%	22408	86%	**73	100%
Vihtavuori N32C Tin Star	<<locked>>	93%	14678	56%	**2	100%
Vihtavuori N330	<<locked>>	88%	22379	86%	**25	100%
Vihtavuori N340	<<locked>>	90%	22597	87%	**02	95%
[Vihtavuori N350]*	<<locked>>	97%	21669	83%	**06	86%
Winchester 231	<<locked>>	70%	22510	86%	**73	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	62%	15331	59%	**1	96%
ADI APS 350	<<locked>>	60%	16911	65%	**3	100%
[ADI APS 450]²	<<locked>>	59%	15214	58%	**3	100%
ADI AS 30	<<locked>>	60%	13402	51%	**6	100%
ADI AS 50N	<<locked>>	61%	14228	54%	**9	99%
[Accurate No. 2]*	<<locked>>	63%	13068	50%	**6	81%
Accurate Solo 1000	<<locked>>	60%	13764	53%	**6	99%
Accurate Solo 1250	<<locked>>	63%	10834	41%	**3	90%
[Alliant BULLSEYE]*	<<locked>>	60%	13909	53%	**2	87%
[Alliant UNIQUE]*	<<locked>>	62%	10370	40%	**3	81%
Baschieri & Pellagri 100	<<locked>>	63%	12763	49%	**0	97%
Hodgdon Clays	<<locked>>	60%	16868	65%	**6	100%
Hodgdon HP38	<<locked>>	61%	21538	83%	**50	100%
[Hodgdon HS-6]*	<<locked>>	71%	19682	75%	**50	81%
[Hodgdon Longshot]*	<<locked>>	64%	16766	64%	**1	80%
Hodgdon Universal	<<locked>>	62%	12734	49%	**9	94%
Lovex S011	<<locked>>	62%	17709	68%	**8	98%
[Lovex S020]*	<<locked>>	60%	11124	43%	**6	86%
[Maxam CSB 1]*	<<locked>>	60%	9587	37%	**1	87%
Maxam CSB 2	<<locked>>	62%	8963	34%	**7	94%
Maxam CSB 3	<<locked>>	61%	11922	46%	**3	96%
Maxam CSB 4	<<locked>>	62%	13460	52%	**9	99%
Maxam CSB 5	<<locked>>	61%	14794	57%	**9	100%
[Ramshot Silhouette]*	<<locked>>	61%	14315	55%	**5	84%
[Ramshot True Blue]*	<<locked>>	63%	17419	67%	**01	81%
Ramshot Zip	<<locked>>	60%	20610	79%	**40	99%
ReloadSwiss RS 12	<<locked>>	63%	12546	48%	**8	99%
[ReloadSwiss RS 20]*	<<locked>>	66%	10399	40%	**0	82%
Rottweil P 801	<<locked>>	60%	14402	55%	**8	100%
[SNPE Vectan A0]*	<<locked>>	62%	10660	41%	**7	80%
[SNPE Vectan BA 9]*	<<locked>>	60%	12618	48%	**6	89%
[SNPE Vectan BA10]²	<<locked>>	59%	17202	66%	**9	100%
[SNPE Vectan BA7 1/2]*	<<locked>>	90%	17999	69%	**7	81%
SNPE Vectan BA9 1/2	<<locked>>	61%	12067	46%	**3	91%
[Somchem MP200]*	<<locked>>	60%	11748	45%	**0	81%
[Somchem MS200]*	<<locked>>	61%	11371	44%	**7	84%
[Vihtavuori 3N37]*	<<locked>>	83%	16143	62%	**7	81%
Vihtavuori N310	<<locked>>	61%	19247	74%	**8	100%
Vihtavuori N320	<<locked>>	60%	11661	45%	**0	98%
Vihtavuori N32C Tin Star	<<locked>>	62%	7049	27%	**2	99%
Vihtavuori N330	<<locked>>	61%	10385	40%	**0	91%
[Vihtavuori N340]*	<<locked>>	60%	9819	38%	**1	80%
[Vihtavuori N350]*	<<locked>>	85%	15911	61%	**1	80%
Winchester 231	<<locked>>	61%	17202	66%	**4	98%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.