Load data for 9 x 18 (Ultra) + .356 | 124gr | LEE Mold 356-124-TC

Recommended Powder(s): ADI AS 50N, Maxam CSB 4, Maxam CSB 5, ReloadSwiss RS 12, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 124gr \| LEE Mold 356-124-TC
Manufacturer SKU:	356-124-TC
Bullet Weight:	124gr \| 8.0g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.598" \| 15.2mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.314" \| 8.0mm
Shank Seated Depth:	0.314" \| 8.0mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B3270_C1230
Last updated:	2025-01-01

Load data for 84 loads in caliber 9 x 18 (Ultra) with .356 | 124gr | LEE Mold 356-124-TC bullet and 42 powders such as ADI AS 50N, Maxam CSB 4, Maxam CSB 5, ReloadSwiss RS 12, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	90%	21451	82%	**5	98%
ADI APS 350	<<locked>>	82%	22089	85%	**4	100%
ADI APS 450	<<locked>>	82%	20726	79%	**7	100%
ADI AS 30	<<locked>>	97%	22495	86%	**3	100%
ADI AS 50N 👍	<<locked>>	92%	21118	81%	**6	100%
[Accurate No. 2]*	<<locked>>	92%	21654	83%	**6	85%
Accurate Solo 1000	<<locked>>	90%	21219	81%	**6	100%
Accurate Solo 1250	<<locked>>	96%	17434	67%	**7	94%
Alliant BULLSEYE	<<locked>>	92%	22989	88%	**5	92%
[Alliant UNIQUE]*	<<locked>>	94%	15156	58%	**3	85%
Baschieri & Pellagri 100	<<locked>>	96%	20972	80%	**0	99%
Hodgdon Clays	<<locked>>	82%	22162	85%	**4	100%
Hodgdon HP38	<<locked>>	73%	22046	84%	**9	98%
Hodgdon TiteGroup	<<locked>>	66%	22017	84%	**3	100%
Hodgdon Universal	<<locked>>	95%	18797	72%	**6	97%
Lovex D032	<<locked>>	64%	21741	83%	**0	95%
Lovex S011	<<locked>>	79%	20900	80%	**6	97%
Lovex S020	<<locked>>	93%	18260	70%	**0	91%
Maxam CSB 1	<<locked>>	97%	16230	62%	**7	93%
Maxam CSB 2	<<locked>>	94%	12560	48%	**0	97%
Maxam CSB 3	<<locked>>	93%	17941	69%	**7	98%
Maxam CSB 4 👍	<<locked>>	95%	21132	81%	**9	100%
Maxam CSB 5 👍	<<locked>>	92%	22829	87%	**6	100%
[Ramshot Silhouette]*	<<locked>>	86%	21103	81%	**9	87%
Ramshot Zip	<<locked>>	72%	21103	81%	**6	97%
ReloadSwiss RS 12 👍	<<locked>>	96%	19000	73%	**5	100%
[ReloadSwiss RS 20]*	<<locked>>	96%	15040	58%	**4	86%
Rottweil P 801 👍	<<locked>>	92%	22205	85%	**2	100%
[SNPE Vectan A0]*	<<locked>>	95%	16926	65%	**4	85%
SNPE Vectan BA 9	<<locked>>	93%	21060	81%	**6	94%
SNPE Vectan BA10	<<locked>>	77%	20711	79%	**7	100%
SNPE Vectan BA9 1/2	<<locked>>	94%	18971	73%	**6	95%
Shooters World Clean Shot	<<locked>>	64%	21741	83%	**0	95%
Shooters World Ultimate Pistol	<<locked>>	65%	21002	80%	**6	92%
[Somchem MP200]*	<<locked>>	92%	19072	73%	**6	87%
[Somchem MS200]*	<<locked>>	93%	17637	68%	**3	88%
Somchem S121	<<locked>>	65%	21089	81%	**2	96%
Vihtavuori N310	<<locked>>	80%	22931	88%	**0	100%
Vihtavuori N320	<<locked>>	91%	18014	69%	**6	100%
Vihtavuori N330	<<locked>>	93%	16795	64%	**3	95%
[Vihtavuori N340]*	<<locked>>	92%	15461	59%	**1	85%
Winchester 231	<<locked>>	80%	21103	81%	**6	97%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	8760	34%	**3	85%
ADI APS 350	<<locked>>	67%	15302	59%	**9	100%
ADI APS 450	<<locked>>	62%	12096	46%	**9	100%
ADI AS 30	<<locked>>	69%	11298	43%	**6	99%
ADI AS 50N	<<locked>>	68%	11226	43%	**6	94%
[Accurate No. 2]*	<<locked>>	86%	18376	70%	**1	83%
Accurate Solo 1000	<<locked>>	65%	11081	42%	**6	94%
[Accurate Solo 1250]*	<<locked>>	78%	10863	42%	**6	86%
[Alliant BULLSEYE]*	<<locked>>	70%	12966	50%	**5	82%
[Alliant UNIQUE]*	<<locked>>	89%	13169	50%	**1	83%
Baschieri & Pellagri 100	<<locked>>	72%	10950	42%	**9	92%
Hodgdon Clays	<<locked>>	67%	15200	58%	**6	100%
Hodgdon HP38	<<locked>>	60%	14199	54%	**1	94%
Hodgdon TiteGroup	<<locked>>	61%	18913	72%	**3	100%
[Hodgdon Universal]*	<<locked>>	67%	8760	34%	**3	85%
Lovex D032	<<locked>>	60%	18623	71%	**4	93%
Lovex S011	<<locked>>	63%	13039	50%	**2	91%
[Lovex S020]*	<<locked>>	77%	11560	44%	**2	83%
[Maxam CSB 1]*	<<locked>>	78%	10254	39%	**9	86%
[Maxam CSB 2]*	<<locked>>	76%	7745	30%	**3	88%
Maxam CSB 3	<<locked>>	75%	11139	43%	**2	93%
Maxam CSB 4	<<locked>>	70%	10892	42%	**2	95%
Maxam CSB 5	<<locked>>	66%	11269	43%	**6	100%
[Ramshot Silhouette]*	<<locked>>	74%	14489	55%	**4	80%
[Ramshot Zip]²	<<locked>>	59%	13648	52%	**1	92%
ReloadSwiss RS 12	<<locked>>	64%	7121	27%	**9	91%
[ReloadSwiss RS 20]*	<<locked>>	91%	13184	50%	**1	83%
Rottweil P 801	<<locked>>	61%	8412	32%	**6	97%
[SNPE Vectan A0]*	<<locked>>	84%	12865	49%	**2	80%
[SNPE Vectan BA 9]*	<<locked>>	67%	10530	40%	**9	82%
SNPE Vectan BA10	<<locked>>	64%	14533	56%	**5	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	72%	10559	40%	**9	86%
Shooters World Clean Shot	<<locked>>	60%	18623	71%	**4	93%
Shooters World Ultimate Pistol	<<locked>>	62%	18391	70%	**3	90%
[Somchem MP200]*	<<locked>>	83%	14547	56%	**4	82%
[Somchem MS200]*	<<locked>>	77%	11545	44%	**5	81%
Somchem S121	<<locked>>	62%	18521	71%	**6	94%
Vihtavuori N310	<<locked>>	62%	12923	49%	**2	100%
Vihtavuori N320	<<locked>>	67%	8963	34%	**9	93%
[Vihtavuori N330]*	<<locked>>	71%	9036	35%	**3	84%
[Vihtavuori N340]*	<<locked>>	86%	13300	51%	**8	82%
Winchester 231	<<locked>>	61%	11618	44%	**9	90%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data