Load data for 9 x 18 (Ultra) + .356 | 102gr | LEE Mold 356-102-1R

Recommended Powder(s): Accurate Solo 1250, Maxam CSB 2, ReloadSwiss RS 12, SNPE Vectan BA9 1/2, Vihtavuori N330

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 102gr \| LEE Mold 356-102-1R
Manufacturer SKU:	356-102-1R
Bullet Weight:	102gr \| 6.6g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.462" \| 11.7mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.178" \| 4.5mm
Shank Seated Depth:	0.178" \| 4.5mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B3267_C1230
Last updated:	2025-01-01

Load data for 82 loads in caliber 9 x 18 (Ultra) with .356 | 102gr | LEE Mold 356-102-1R bullet and 41 powders such as Accurate Solo 1250, Maxam CSB 2, ReloadSwiss RS 12, SNPE Vectan BA9 1/2, Vihtavuori N330. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	78%	21944	84%	**81	99%
ADI AS 30	<<locked>>	84%	22365	86%	**96	100%
ADI AS 50N	<<locked>>	82%	22191	85%	**29	100%
Accurate No. 2	<<locked>>	84%	23061	88%	**35	90%
Accurate Solo 1000	<<locked>>	82%	22713	87%	**06	100%
Accurate Solo 1250 👍	<<locked>>	93%	22829	87%	**68	99%
Alliant BULLSEYE	<<locked>>	81%	23134	89%	**01	95%
Alliant UNIQUE	<<locked>>	96%	22510	86%	**17	94%
Baschieri & Pellagri 100	<<locked>>	86%	22437	86%	**19	100%
Hodgdon Clays	<<locked>>	73%	22394	86%	**10	100%
Hodgdon HP38	<<locked>>	64%	22568	86%	**48	100%
[Hodgdon HS-6]*	<<locked>>	77%	22249	85%	**71	82%
[Hodgdon Longshot]*	<<locked>>	74%	22307	85%	**84	85%
Hodgdon Universal	<<locked>>	87%	21944	84%	**81	99%
Lovex S011	<<locked>>	73%	23163	89%	**32	100%
Lovex S020	<<locked>>	86%	22046	84%	**78	96%
Maxam CSB 1	<<locked>>	94%	21219	81%	**32	98%
Maxam CSB 2 👍	<<locked>>	95%	19885	76%	**75	100%
Maxam CSB 3	<<locked>>	90%	22640	87%	**52	100%
Maxam CSB 4	<<locked>>	84%	21915	84%	**22	100%
Maxam CSB 5	<<locked>>	80%	22887	88%	**99	100%
Ramshot Silhouette	<<locked>>	78%	22989	88%	**94	92%
[Ramshot True Blue]*	<<locked>>	73%	23061	88%	**84	86%
Ramshot Zip	<<locked>>	66%	23467	90%	**65	100%
ReloadSwiss RS 12 👍	<<locked>>	86%	22452	86%	**14	100%
ReloadSwiss RS 20	<<locked>>	96%	20697	79%	**88	95%
Rottweil P 801	<<locked>>	80%	23337	89%	**81	100%
SNPE Vectan A0	<<locked>>	93%	21959	84%	**32	93%
SNPE Vectan BA 9	<<locked>>	83%	21901	84%	**22	97%
SNPE Vectan BA10	<<locked>>	70%	21799	83%	**27	100%
SNPE Vectan BA9 1/2 👍	<<locked>>	90%	23482	90%	**78	99%
Somchem MP200	<<locked>>	87%	22727	87%	**88	93%
Somchem MS200	<<locked>>	92%	23366	89%	**84	95%
[Vihtavuori 3N37]*	<<locked>>	96%	21611	83%	**91	86%
Vihtavuori N310	<<locked>>	68%	22031	84%	**63	100%
Vihtavuori N320	<<locked>>	85%	21451	82%	**42	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	13532	52%	**5	100%
Vihtavuori N330 👍	<<locked>>	92%	22931	88%	**17	100%
Vihtavuori N340	<<locked>>	94%	22829	87%	**84	95%
[Vihtavuori N350]*	<<locked>>	97%	19972	76%	**45	84%
Winchester 231	<<locked>>	74%	23467	90%	**65	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	61%	12720	49%	**1	93%
ADI AS 30	<<locked>>	60%	11734	45%	**9	100%
ADI AS 50N	<<locked>>	60%	12198	47%	**2	97%
[Accurate No. 2]*	<<locked>>	65%	12792	49%	**9	80%
Accurate Solo 1000	<<locked>>	60%	12314	47%	**9	98%
[Accurate Solo 1250]*	<<locked>>	62%	9384	36%	**7	87%
[Alliant BULLSEYE]*	<<locked>>	62%	13489	52%	**1	86%
[Alliant UNIQUE]*	<<locked>>	67%	10385	40%	**2	81%
Baschieri & Pellagri 100	<<locked>>	62%	11182	43%	**3	95%
Hodgdon Clays	<<locked>>	61%	15925	61%	**2	100%
Hodgdon HP38	<<locked>>	62%	20668	79%	**15	99%
[Hodgdon HS-6]*	<<locked>>	75%	20653	79%	**45	81%
[Hodgdon Longshot]*	<<locked>>	68%	17811	68%	**93	81%
Hodgdon Universal	<<locked>>	61%	10457	40%	**9	90%
Lovex S011	<<locked>>	61%	15809	61%	**8	96%
[Lovex S020]*	<<locked>>	62%	10196	39%	**6	83%
[Maxam CSB 1]*²	<<locked>>	59%	8079	31%	**4	84%
[Maxam CSB 2]*	<<locked>>	61%	7208	28%	**4	89%
Maxam CSB 3	<<locked>>	61%	10356	40%	**6	94%
Maxam CSB 4	<<locked>>	62%	11908	46%	**9	98%
Maxam CSB 5	<<locked>>	61%	13271	51%	**5	100%
[Ramshot Silhouette]*	<<locked>>	62%	13271	51%	**4	82%
[Ramshot True Blue]*	<<locked>>	65%	17202	66%	**66	80%
Ramshot Zip	<<locked>>	61%	19769	76%	**02	99%
ReloadSwiss RS 12	<<locked>>	62%	10080	39%	**5	98%
[ReloadSwiss RS 20]*	<<locked>>	71%	10544	40%	**6	82%
Rottweil P 801	<<locked>>	62%	13285	51%	**4	100%
[SNPE Vectan A0]*	<<locked>>	68%	11226	43%	**3	81%
[SNPE Vectan BA 9]*	<<locked>>	60%	11008	42%	**3	86%
SNPE Vectan BA10	<<locked>>	63%	17869	68%	**8	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	61%	10269	39%	**9	88%
[Somchem MP200]*	<<locked>>	65%	11879	45%	**2	81%
[Somchem MS200]*	<<locked>>	60%	9689	37%	**0	80%
[Vihtavuori 3N37]*	<<locked>>	88%	16998	65%	**93	81%
Vihtavuori N310	<<locked>>	60%	17434	67%	**1	100%
Vihtavuori N320	<<locked>>	60%	10022	38%	**3	97%
Vihtavuori N32C Tin Star	<<locked>>	62%	5482	21%	**6	96%
[Vihtavuori N330]*	<<locked>>	60%	8746	33%	**6	87%
[Vihtavuori N340]*	<<locked>>	65%	10080	39%	**9	80%
[Vihtavuori N350]*	<<locked>>	91%	16998	65%	**79	81%
Winchester 231	<<locked>>	60%	15069	58%	**7	96%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.