Load data for 9 x 18 (Ultra) + .355 | 95gr | Barnes TAC-XP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 95gr \| Barnes TAC-XP
Manufacturer SKU:	30444
Bullet Weight:	95gr \| 6.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.556" \| 14.1mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.272" \| 6.9mm
Shank Seated Depth:	0.272" \| 6.9mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B697_C1230
Last updated:	2025-01-01

Load data for 82 loads in caliber 9 x 18 (Ultra) with .355 | 95gr | Barnes TAC-XP bullet and 41 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	90%	22452	86%	**29	96%
ADI APS 350	<<locked>>	79%	21103	81%	**5	100%
ADI APS 450	<<locked>>	83%	21785	83%	**8	100%
ADI AS 30 👍	<<locked>>	95%	23076	88%	**56	100%
ADI AS 50N	<<locked>>	90%	21408	82%	**56	99%
[Accurate No. 2]*	<<locked>>	92%	22263	85%	**30	83%
Accurate Solo 1000	<<locked>>	89%	21248	81%	**27	99%
Accurate Solo 1250	<<locked>>	97%	18536	71%	**20	92%
Alliant BULLSEYE	<<locked>>	92%	23453	90%	**29	90%
[Alliant UNIQUE]*	<<locked>>	94%	16389	63%	**10	83%
Baschieri & Pellagri 100	<<locked>>	97%	22307	85%	**56	98%
Hodgdon Clays	<<locked>>	79%	21016	81%	**5	100%
Hodgdon HP38	<<locked>>	73%	22713	87%	**86	97%
Hodgdon TiteGroup	<<locked>>	64%	21466	82%	**43	100%
Hodgdon Universal	<<locked>>	95%	20262	78%	**89	95%
Lovex S011	<<locked>>	81%	22611	87%	**53	96%
Lovex S020	<<locked>>	96%	21045	81%	**83	90%
Maxam CSB 1	<<locked>>	93%	15737	60%	**5	90%
Maxam CSB 2	<<locked>>	95%	13837	53%	**01	95%
Maxam CSB 3	<<locked>>	96%	19972	77%	**47	98%
Maxam CSB 4	<<locked>>	92%	20334	78%	**47	99%
Maxam CSB 5 👍	<<locked>>	91%	22742	87%	**60	100%
[Ramshot Silhouette]*	<<locked>>	87%	22075	85%	**96	85%
Ramshot Zip	<<locked>>	72%	21814	84%	**73	96%
ReloadSwiss RS 12 👍	<<locked>>	95%	19522	75%	**25	100%
[ReloadSwiss RS 20]*	<<locked>>	95%	15693	60%	**4	83%
Rottweil P 801 👍	<<locked>>	91%	22814	87%	**42	100%
[SNPE Vectan A0]*	<<locked>>	95%	17796	68%	**1	83%
SNPE Vectan BA 9	<<locked>>	92%	21277	82%	**37	92%
SNPE Vectan BA10	<<locked>>	78%	21770	83%	**8	100%
SNPE Vectan BA9 1/2	<<locked>>	94%	20175	77%	**50	93%
Shooters World Ultimate Pistol	<<locked>>	65%	21495	82%	**96	90%
[Somchem MP200]*	<<locked>>	95%	20900	80%	**76	85%
[Somchem MS200]*	<<locked>>	93%	18768	72%	**20	86%
Somchem S121	<<locked>>	64%	21640	83%	**19	93%
Vihtavuori N310	<<locked>>	80%	23482	90%	**50	100%
Vihtavuori N320 👍	<<locked>>	94%	20044	77%	**73	100%
Vihtavuori N32C Tin Star	<<locked>>	93%	9674	37%	**7	99%
Vihtavuori N330	<<locked>>	93%	17477	67%	**40	93%
[Vihtavuori N340]*	<<locked>>	96%	18289	70%	**17	85%
Winchester 231	<<locked>>	80%	21814	84%	**73	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	61%	10457	40%	**7	84%
ADI APS 350	<<locked>>	61%	13547	52%	**1	100%
ADI APS 450	<<locked>>	61%	12676	49%	**0	100%
ADI AS 30	<<locked>>	62%	10631	41%	**1	97%
ADI AS 50N	<<locked>>	60%	10298	39%	**1	90%
[Accurate No. 2]*	<<locked>>	87%	19696	75%	**4	81%
Accurate Solo 1000	<<locked>>	63%	11342	43%	**1	92%
[Accurate Solo 1250]*	<<locked>>	73%	10428	40%	**7	82%
[Alliant BULLSEYE]*	<<locked>>	70%	13779	53%	**9	80%
[Alliant UNIQUE]*	<<locked>>	90%	14924	57%	**4	81%
[Baschieri & Pellagri 100]*	<<locked>>	63%	9427	36%	**8	86%
Hodgdon Clays	<<locked>>	61%	13402	51%	**0	100%
Hodgdon HP38	<<locked>>	62%	16665	64%	**5	93%
Hodgdon TiteGroup	<<locked>>	60%	19174	73%	**01	99%
[Hodgdon Universal]*	<<locked>>	63%	9311	36%	**1	81%
[Lovex S011]*	<<locked>>	60%	12430	48%	**7	87%
[Lovex S020]*	<<locked>>	79%	13314	51%	**9	82%
[Maxam CSB 1]*	<<locked>>	73%	9993	38%	**1	81%
[Maxam CSB 2]*	<<locked>>	67%	7063	27%	**1	81%
[Maxam CSB 3]*	<<locked>>	60%	8398	32%	**8	84%
Maxam CSB 4	<<locked>>	62%	9485	36%	**8	90%
[Maxam CSB 5]²	<<locked>>	59%	9848	38%	**1	98%
[Ramshot Silhouette]*	<<locked>>	80%	18304	70%	**24	81%
Ramshot Zip	<<locked>>	62%	15679	60%	**8	91%
[ReloadSwiss RS 12]*	<<locked>>	61%	7658	29%	**7	88%
[ReloadSwiss RS 20]*	<<locked>>	91%	14083	54%	**8	80%
Rottweil P 801	<<locked>>	62%	9935	38%	**0	96%
[SNPE Vectan A0]*	<<locked>>	90%	16070	62%	**2	81%
[SNPE Vectan BA 9]*	<<locked>>	67%	11211	43%	**7	80%
SNPE Vectan BA10	<<locked>>	62%	14692	56%	**3	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	67%	10211	39%	**4	81%
[Shooters World Ultimate Pistol]*	<<locked>>	62%	19319	74%	**56	88%
[Somchem MP200]*	<<locked>>	87%	17347	66%	**01	82%
[Somchem MS200]*	<<locked>>	80%	13706	53%	**9	80%
Somchem S121	<<locked>>	61%	19479	75%	**76	92%
Vihtavuori N310	<<locked>>	60%	13126	50%	**9	100%
[Vihtavuori N320]*²	<<locked>>	59%	7977	31%	**5	87%
Vihtavuori N32C Tin Star	<<locked>>	70%	5976	23%	**9	91%
[Vihtavuori N330]*	<<locked>>	71%	9834	38%	**0	82%
[Vihtavuori N340]*	<<locked>>	87%	14881	57%	**2	81%
[Winchester 231]*	<<locked>>	61%	12546	48%	**9	88%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.