Load data for 9 x 18 (Ultra) + .355 | 80gr | Peregrine SD 9mm Short

Recommended Powder(s): Accurate Solo 1000, Hodgdon TiteGroup, Maxam CSB 5, ReloadSwiss RS 12, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Peregrine SD 9mm Short
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.520" \| 13.2mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.236" \| 6.0mm
Shank Seated Depth:	0.185" \| 4.7mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B8176_C1230
Last updated:	2025-01-01
Recommended Twist Rate:	1:28 - 1:24

Load data for 74 loads in caliber 9 x 18 (Ultra) with .355 | 80gr | Peregrine SD 9mm Short bullet and 37 powders such as Accurate Solo 1000, Hodgdon TiteGroup, Maxam CSB 5, ReloadSwiss RS 12, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	95%	21524	82%	**02	95%
ADI APS 350	<<locked>>	84%	21132	81%	**96	100%
ADI APS 450	<<locked>>	86%	20958	80%	**29	100%
ADI AS 30	<<locked>>	97%	19986	77%	**91	100%
ADI AS 50N	<<locked>>	94%	19928	76%	**14	98%
Accurate Solo 1000 👍	<<locked>>	95%	21640	83%	**04	99%
[Accurate Solo 1250]*	<<locked>>	96%	15838	61%	**22	89%
[Alliant BULLSEYE]*	<<locked>>	94%	22510	86%	**86	88%
Baschieri & Pellagri 100	<<locked>>	96%	19043	73%	**65	96%
Hodgdon Clays	<<locked>>	84%	21147	81%	**12	100%
Hodgdon HP38	<<locked>>	75%	21379	82%	**34	96%
Hodgdon TiteGroup 👍	<<locked>>	70%	23351	89%	**47	100%
Hodgdon Universal	<<locked>>	93%	15911	61%	**71	91%
Lovex D032	<<locked>>	66%	21321	82%	**84	91%
Lovex S011	<<locked>>	85%	22611	87%	**20	96%
[Lovex S020]*	<<locked>>	97%	18739	72%	**07	87%
[Maxam CSB 1]*	<<locked>>	97%	14692	56%	**86	88%
Maxam CSB 2	<<locked>>	94%	10921	42%	**76	91%
Maxam CSB 3	<<locked>>	95%	17289	66%	**55	95%
Maxam CSB 4	<<locked>>	93%	18202	70%	**75	98%
Maxam CSB 5 👍	<<locked>>	96%	23380	90%	**43	100%
[Ramshot Silhouette]*	<<locked>>	92%	22887	88%	**83	84%
Ramshot Zip	<<locked>>	77%	22495	86%	**63	96%
ReloadSwiss RS 12 👍	<<locked>>	97%	16824	64%	**60	99%
Rottweil P 801 👍	<<locked>>	96%	22321	86%	**22	100%
[SNPE Vectan BA 9]*	<<locked>>	94%	19783	76%	**71	89%
SNPE Vectan BA10	<<locked>>	85%	23482	90%	**71	100%
SNPE Vectan BA9 1/2	<<locked>>	97%	18347	70%	**84	91%
Shooters World Clean Shot	<<locked>>	66%	21321	82%	**84	91%
Shooters World Ultimate Pistol	<<locked>>	71%	23409	90%	**16	90%
[Somchem MS200]*	<<locked>>	96%	16940	65%	**42	83%
Somchem S121	<<locked>>	69%	22278	85%	**16	93%
Vihtavuori N310	<<locked>>	82%	21828	84%	**07	100%
Vihtavuori N320	<<locked>>	94%	17100	66%	**88	98%
Vihtavuori N32C Tin Star	<<locked>>	95%	7513	29%	**2	95%
Vihtavuori N330	<<locked>>	96%	16027	61%	**71	91%
Winchester 231	<<locked>>	86%	22495	86%	**63	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	67%	9108	35%	**8	81%
ADI APS 350	<<locked>>	63%	12285	47%	**9	100%
ADI APS 450	<<locked>>	62%	11182	43%	**2	100%
ADI AS 30	<<locked>>	63%	8108	31%	**0	92%
[ADI AS 50N]*	<<locked>>	60%	7513	29%	**0	84%
[Accurate Solo 1000]*	<<locked>>	63%	9456	36%	**9	88%
[Accurate Solo 1250]*	<<locked>>	79%	10066	39%	**5	80%
[Alliant BULLSEYE]*	<<locked>>	79%	15055	58%	**06	81%
[Baschieri & Pellagri 100]*	<<locked>>	67%	8137	31%	**3	83%
Hodgdon Clays	<<locked>>	63%	12198	47%	**5	100%
[Hodgdon HP38]*	<<locked>>	60%	12676	49%	**24	88%
Hodgdon TiteGroup	<<locked>>	61%	16984	65%	**22	98%
[Hodgdon Universal]*	<<locked>>	74%	9108	35%	**8	81%
[Lovex D032]*	<<locked>>	60%	16853	65%	**86	87%
[Lovex S011]*	<<locked>>	63%	11473	44%	**1	85%
[Lovex S020]*	<<locked>>	86%	13431	51%	**79	81%
[Maxam CSB 1]*	<<locked>>	84%	10530	40%	**1	82%
[Maxam CSB 2]*	<<locked>>	82%	7818	30%	**2	83%
[Maxam CSB 3]*	<<locked>>	65%	7353	28%	**7	80%
[Maxam CSB 4]*	<<locked>>	62%	7571	29%	**3	85%
Maxam CSB 5	<<locked>>	60%	8137	31%	**3	95%
[Ramshot Silhouette]*	<<locked>>	86%	19218	74%	**04	81%
[Ramshot Zip]*	<<locked>>	62%	13431	51%	**50	88%
[ReloadSwiss RS 12]*	<<locked>>	63%	5714	22%	**7	80%
[Rottweil P 801]*	<<locked>>	61%	6672	26%	**6	89%
[SNPE Vectan BA 9]*	<<locked>>	76%	12183	47%	**4	81%
SNPE Vectan BA10	<<locked>>	62%	12821	49%	**8	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	77%	10863	42%	**8	82%
[Shooters World Clean Shot]*	<<locked>>	60%	16853	65%	**86	87%
[Shooters World Ultimate Pistol]*	<<locked>>	61%	15940	61%	**42	83%
[Somchem MS200]*	<<locked>>	92%	15461	59%	**06	82%
[Somchem S121]*	<<locked>>	60%	14982	57%	**48	87%
Vihtavuori N310	<<locked>>	60%	10675	41%	**4	100%
[Vihtavuori N320]*	<<locked>>	64%	6976	27%	**3	83%
[Vihtavuori N32C Tin Star]*	<<locked>>	70%	3916	15%	**9	80%
[Vihtavuori N330]*	<<locked>>	80%	10443	40%	**1	82%
[Winchester 231]*²	<<locked>>	59%	9500	36%	**9	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.