Load data for 9 x 18 (Ultra) + .355 | 80gr | Barnes TAC-XP

Recommended Powder(s): ADI AS 50N, Maxam CSB 4, ReloadSwiss RS 12, Rottweil P 801, Vihtavuori N320

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Barnes TAC-XP
Manufacturer SKU:	30440
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.512" \| 13.0mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.228" \| 5.8mm
Shank Seated Depth:	0.228" \| 5.8mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B696_C1230
Last updated:	2025-01-01

Load data for 82 loads in caliber 9 x 18 (Ultra) with .355 | 80gr | Barnes TAC-XP bullet and 41 powders such as ADI AS 50N, Maxam CSB 4, ReloadSwiss RS 12, Rottweil P 801, Vihtavuori N320. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	89%	22481	86%	**93	96%
ADI APS 350	<<locked>>	81%	22321	85%	**02	100%
ADI APS 450	<<locked>>	84%	22075	85%	**35	100%
ADI AS 30	<<locked>>	94%	22307	85%	**07	100%
ADI AS 50N 👍	<<locked>>	92%	22669	87%	**40	99%
Accurate Solo 1000	<<locked>>	92%	22902	88%	**14	99%
Accurate Solo 1250	<<locked>>	94%	17289	66%	**42	90%
[Alliant BULLSEYE]*	<<locked>>	88%	21712	83%	**53	88%
[Alliant UNIQUE]*	<<locked>>	94%	16563	63%	**58	82%
Baschieri & Pellagri 100	<<locked>>	94%	20885	80%	**88	97%
Hodgdon Clays	<<locked>>	81%	22481	86%	**19	100%
Hodgdon HP38	<<locked>>	73%	22931	88%	**50	97%
Hodgdon TiteGroup	<<locked>>	66%	22872	88%	**24	100%
Hodgdon Universal	<<locked>>	95%	20479	78%	**50	94%
Lovex D032	<<locked>>	64%	22481	86%	**94	92%
Lovex S011	<<locked>>	79%	21480	82%	**88	95%
[Lovex S020]*	<<locked>>	95%	20798	80%	**34	89%
Maxam CSB 1	<<locked>>	95%	16360	63%	**15	90%
Maxam CSB 2	<<locked>>	96%	14460	55%	**58	95%
Maxam CSB 3	<<locked>>	93%	18927	73%	**78	96%
Maxam CSB 4 👍	<<locked>>	95%	21988	84%	**30	99%
Maxam CSB 5	<<locked>>	90%	22437	86%	**14	100%
[Ramshot Silhouette]*	<<locked>>	87%	22452	86%	**60	83%
Ramshot Zip	<<locked>>	72%	22017	84%	**34	95%
ReloadSwiss RS 12 👍	<<locked>>	95%	19537	75%	**93	100%
Rottweil P 801 👍	<<locked>>	90%	23235	89%	**12	100%
[SNPE Vectan A0]*	<<locked>>	95%	17941	69%	**15	82%
SNPE Vectan BA 9	<<locked>>	95%	23047	88%	**24	92%
SNPE Vectan BA10	<<locked>>	78%	22060	84%	**35	100%
SNPE Vectan BA9 1/2	<<locked>>	94%	20363	78%	**11	93%
Shooters World Clean Shot	<<locked>>	64%	22481	86%	**94	92%
Shooters World Ultimate Pistol	<<locked>>	67%	23148	89%	**89	90%
[Somchem MP200]*	<<locked>>	96%	21959	84%	**50	85%
[Somchem MS200]*	<<locked>>	97%	20813	80%	**14	87%
Somchem S121	<<locked>>	65%	22887	88%	**09	93%
Vihtavuori N310	<<locked>>	80%	23496	90%	**17	100%
Vihtavuori N320 👍	<<locked>>	95%	20856	80%	**47	99%
Vihtavuori N32C Tin Star	<<locked>>	93%	9660	37%	**8	98%
Vihtavuori N330	<<locked>>	93%	17651	68%	**94	92%
[Vihtavuori N340]*	<<locked>>	96%	18289	70%	**65	84%
Winchester 231	<<locked>>	80%	22017	84%	**34	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	62%	10544	40%	**1	83%
ADI APS 350	<<locked>>	61%	13735	53%	**2	100%
ADI APS 450	<<locked>>	61%	12488	48%	**8	100%
ADI AS 30	<<locked>>	61%	10544	40%	**6	96%
ADI AS 50N	<<locked>>	63%	11066	42%	**8	90%
Accurate Solo 1000	<<locked>>	62%	11182	43%	**2	91%
[Accurate Solo 1250]*	<<locked>>	73%	10646	41%	**5	81%
[Alliant BULLSEYE]*	<<locked>>	73%	15055	58%	**83	81%
[Alliant UNIQUE]*	<<locked>>	91%	15040	58%	**19	80%
[Baschieri & Pellagri 100]*	<<locked>>	61%	8978	34%	**0	84%
Hodgdon Clays	<<locked>>	61%	13764	53%	**2	100%
Hodgdon HP38	<<locked>>	61%	15925	61%	**93	92%
Hodgdon TiteGroup	<<locked>>	60%	18927	73%	**48	99%
[Hodgdon Universal]*	<<locked>>	64%	9558	37%	**9	80%
Lovex D032	<<locked>>	61%	20233	77%	**48	90%
[Lovex S011]*	<<locked>>	61%	12923	50%	**8	87%
[Lovex S020]*	<<locked>>	81%	13924	53%	**66	81%
[Maxam CSB 1]*	<<locked>>	74%	10037	38%	**2	80%
[Maxam CSB 2]*	<<locked>>	68%	7353	28%	**0	80%
[Maxam CSB 3]*²	<<locked>>	59%	8108	31%	**0	82%
[Maxam CSB 4]*	<<locked>>	60%	9311	36%	**3	89%
Maxam CSB 5	<<locked>>	63%	11298	43%	**8	99%
[Ramshot Silhouette]*	<<locked>>	81%	19232	74%	**94	81%
Ramshot Zip	<<locked>>	61%	15229	58%	**79	90%
[ReloadSwiss RS 12]*	<<locked>>	62%	8006	31%	**5	87%
Rottweil P 801	<<locked>>	63%	10414	40%	**4	96%
[SNPE Vectan A0]*	<<locked>>	91%	16621	64%	**83	81%
[SNPE Vectan BA 9]*	<<locked>>	70%	12502	48%	**1	81%
SNPE Vectan BA10	<<locked>>	61%	14112	54%	**1	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	68%	10443	40%	**8	80%
Shooters World Clean Shot	<<locked>>	61%	20233	77%	**48	90%
[Shooters World Ultimate Pistol]*	<<locked>>	62%	19508	75%	**11	87%
[Somchem MP200]*	<<locked>>	89%	18710	72%	**78	82%
[Somchem MS200]*	<<locked>>	82%	14518	56%	**53	80%
Somchem S121	<<locked>>	61%	19479	75%	**30	91%
Vihtavuori N310	<<locked>>	63%	14489	55%	**47	100%
[Vihtavuori N320]*	<<locked>>	62%	8760	34%	**2	87%
[Vihtavuori N32C Tin Star]*²	<<locked>>	59%	4757	18%	**3	84%
[Vihtavuori N330]*	<<locked>>	71%	9979	38%	**8	80%
[Vihtavuori N340]*	<<locked>>	92%	16462	63%	**22	82%
[Winchester 231]*	<<locked>>	61%	12517	48%	**4	86%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data