Load data for 9 x 18 (Ultra) + .355 | 124gr | Nosler JHP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 124gr \| Nosler JHP
Manufacturer SKU:	43123
Bullet Weight:	124gr \| 8.0g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.560" \| 14.2mm
Caliber:	9 x 18 (Ultra) load data
Case Length (l3):	0.705" \| 17.9mm
Cartridge Length (C.O.L.):	0.989" \| 25.1mm
Seated Depth:	0.276" \| 7.0mm
Shank Seated Depth:	0.276" \| 7.0mm
Case Capacity:	12.6 Grains of Water \| 0.82 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	26107 psi \| 1800 bar
LID:	LID_B4158_C1230
Last updated:	2025-01-01

Load data for 82 loads in caliber 9 x 18 (Ultra) with .355 | 124gr | Nosler JHP bullet and 41 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	83%	23380	90%	**8	99%
ADI APS 350	<<locked>>	74%	21770	83%	**7	100%
ADI APS 450	<<locked>>	79%	22858	88%	**3	100%
ADI AS 30	<<locked>>	86%	22249	85%	**3	100%
ADI AS 50N	<<locked>>	86%	23424	90%	**2	100%
[Accurate No. 2]*	<<locked>>	85%	21785	83%	**6	88%
Accurate Solo 1000	<<locked>>	85%	23003	88%	**2	100%
Accurate Solo 1250	<<locked>>	94%	21176	81%	**2	98%
Alliant BULLSEYE	<<locked>>	80%	21118	81%	**8	93%
Alliant UNIQUE	<<locked>>	96%	21060	81%	**1	93%
Baschieri & Pellagri 100	<<locked>>	89%	22234	85%	**2	100%
Hodgdon Clays	<<locked>>	74%	21886	84%	**7	100%
Hodgdon HP38	<<locked>>	67%	23134	89%	**5	100%
[Hodgdon Longshot]*	<<locked>>	76%	21857	84%	**1	84%
Hodgdon Universal 👍	<<locked>>	92%	23380	90%	**8	99%
Lovex S011	<<locked>>	74%	22365	86%	**2	99%
Lovex S020	<<locked>>	89%	22365	86%	**5	95%
Maxam CSB 1	<<locked>>	95%	19928	76%	**9	97%
Maxam CSB 2 👍	<<locked>>	97%	19203	74%	**1	100%
Maxam CSB 3	<<locked>>	92%	22539	86%	**2	100%
Maxam CSB 4	<<locked>>	89%	23003	88%	**5	100%
Maxam CSB 5	<<locked>>	81%	22263	85%	**6	100%
[Ramshot Silhouette]*	<<locked>>	78%	21132	81%	**2	89%
[Ramshot True Blue]*	<<locked>>	75%	22916	88%	**1	85%
Ramshot Zip	<<locked>>	67%	22191	85%	**8	99%
ReloadSwiss RS 12 👍	<<locked>>	88%	21698	83%	**1	100%
ReloadSwiss RS 20	<<locked>>	97%	19769	76%	**2	94%
Rottweil P 801	<<locked>>	80%	21901	84%	**8	100%
SNPE Vectan A0	<<locked>>	97%	21973	84%	**5	92%
SNPE Vectan BA 9	<<locked>>	85%	21480	82%	**2	96%
SNPE Vectan BA10	<<locked>>	74%	22829	87%	**3	100%
SNPE Vectan BA9 1/2	<<locked>>	91%	23003	88%	**8	98%
Somchem MP200	<<locked>>	88%	21944	84%	**1	91%
Somchem MS200	<<locked>>	95%	23438	90%	**1	95%
[Vihtavuori 3N37]*	<<locked>>	96%	19189	73%	**5	82%
Vihtavuori N310	<<locked>>	71%	22902	88%	**3	100%
Vihtavuori N320 👍	<<locked>>	90%	23206	89%	**1	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	12691	49%	**1	100%
Vihtavuori N330 👍	<<locked>>	95%	22553	86%	**4	99%
Vihtavuori N340	<<locked>>	93%	21219	81%	**2	93%
Winchester 231	<<locked>>	74%	22191	85%	**8	99%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	62%	13227	51%	**1	93%
ADI APS 350	<<locked>>	62%	15983	61%	**9	100%
ADI APS 450	<<locked>>	62%	15171	58%	**2	100%
ADI AS 30	<<locked>>	63%	12937	50%	**8	100%
ADI AS 50N	<<locked>>	61%	12575	48%	**8	97%
[Accurate No. 2]*	<<locked>>	71%	14750	56%	**4	82%
[Accurate Solo 1000]²	<<locked>>	59%	11792	45%	**2	97%
[Accurate Solo 1250]*	<<locked>>	64%	10008	38%	**9	87%
[Alliant BULLSEYE]*	<<locked>>	62%	13082	50%	**4	85%
[Alliant UNIQUE]*	<<locked>>	69%	10907	42%	**5	81%
[Baschieri & Pellagri 100]²	<<locked>>	59%	10167	39%	**3	93%
Hodgdon Clays	<<locked>>	62%	16070	62%	**8	100%
Hodgdon HP38	<<locked>>	60%	18434	71%	**6	98%
[Hodgdon Longshot]*	<<locked>>	70%	18362	70%	**2	81%
[Hodgdon Universal]*	<<locked>>	60%	10457	40%	**5	89%
Lovex S011	<<locked>>	61%	15084	58%	**1	95%
[Lovex S020]*²	<<locked>>	59%	9152	35%	**9	80%
[Maxam CSB 1]*	<<locked>>	65%	9616	37%	**3	86%
Maxam CSB 2	<<locked>>	63%	7963	31%	**9	90%
Maxam CSB 3	<<locked>>	61%	10428	40%	**6	93%
Maxam CSB 4	<<locked>>	63%	11792	45%	**8	97%
Maxam CSB 5	<<locked>>	60%	12473	48%	**2	100%
[Ramshot Silhouette]*	<<locked>>	64%	14025	54%	**1	82%
[Ramshot True Blue]*	<<locked>>	70%	18826	72%	**2	81%
Ramshot Zip	<<locked>>	60%	17608	67%	**6	97%
ReloadSwiss RS 12	<<locked>>	62%	10008	38%	**5	97%
[ReloadSwiss RS 20]*	<<locked>>	70%	10298	39%	**9	80%
[Rottweil P 801]²	<<locked>>	59%	11922	46%	**4	100%
[SNPE Vectan A0]*	<<locked>>	69%	11531	44%	**5	81%
[SNPE Vectan BA 9]*	<<locked>>	60%	11023	42%	**9	85%
SNPE Vectan BA10	<<locked>>	63%	17376	67%	**8	100%
[SNPE Vectan BA9 1/2]*²	<<locked>>	59%	10022	38%	**6	87%
[Somchem MP200]*	<<locked>>	68%	12908	49%	**1	82%
[Somchem MS200]*	<<locked>>	63%	10863	42%	**2	82%
[Vihtavuori 3N37]*	<<locked>>	92%	17593	67%	**2	80%
Vihtavuori N310	<<locked>>	61%	16853	65%	**4	100%
Vihtavuori N320	<<locked>>	60%	10167	39%	**2	96%
Vihtavuori N32C Tin Star	<<locked>>	77%	8485	32%	**9	100%
[Vihtavuori N330]*²	<<locked>>	59%	8572	33%	**9	85%
[Vihtavuori N340]*	<<locked>>	67%	10443	40%	**9	80%
Winchester 231	<<locked>>	62%	15621	60%	**7	96%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data