Load data for 9 mm Steyr (Roth) + .357 | 115gr | Reichenberg HDB Fangschuss

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.357 \| 115gr \| Reichenberg HDB Fangschuss
Bullet Weight:	115gr \| 7.5g
Bullet Diameter:	0.357" \| 9.07mm
Bullet Length:	0.610" \| 15.5mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.239" \| 31.5mm
Seated Depth:	0.284" \| 7.2mm
Shank Seated Depth:	0.184" \| 4.7mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B10179_C1226
Last updated:	2025-01-01
Recommended Twist Rate:	1:27 - 1:23

Load data for 44 loads in caliber 9 mm Steyr (Roth) with .357 | 115gr | Reichenberg HDB Fangschuss bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate No. 2	<<locked>>	64%	17608	90%	**33	92%
Accurate Solo 1250	<<locked>>	68%	17260	88%	**33	99%
Alliant UNIQUE	<<locked>>	68%	16926	86%	**66	94%
Baschieri & Pellagri 100	<<locked>>	63%	17013	87%	**4	100%
Hodgdon TrailBoss	<<locked>>	93%	9573	49%	**7	100%
Lovex S020	<<locked>>	63%	16824	86%	**47	96%
Maxam CSB 1	<<locked>>	69%	16520	84%	**14	99%
Maxam CSB 2	<<locked>>	70%	16563	85%	**60	100%
Maxam CSB 3	<<locked>>	66%	17535	90%	**27	100%
ReloadSwiss RS 14	<<locked>>	96%	9137	47%	**1	97%
ReloadSwiss RS 20	<<locked>>	73%	16897	86%	**89	97%
[Rottweil P 806]*	<<locked>>	88%	16708	85%	**81	85%
SNPE Vectan A0	<<locked>>	69%	16665	85%	**14	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	77%	17303	88%	**50	85%
SNPE Vectan BA9 1/2	<<locked>>	63%	16824	86%	**30	99%
Somchem MP200	<<locked>>	64%	17593	90%	**66	93%
Somchem MS200	<<locked>>	65%	16824	86%	**33	95%
[Vihtavuori 3N37]*	<<locked>>	73%	17216	88%	**86	87%
Vihtavuori N32C Tin Star	<<locked>>	85%	17376	89%	**4	100%
Vihtavuori N330	<<locked>>	65%	16404	84%	**53	100%
Vihtavuori N340	<<locked>>	69%	17318	88%	**56	95%
[Vihtavuori N350]*	<<locked>>	76%	16737	85%	**70	87%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate No. 2	<<locked>>	62%	16244	83%	**01	90%
Accurate Solo 1250	<<locked>>	61%	13648	70%	**8	97%
Alliant UNIQUE	<<locked>>	61%	13793	70%	**8	91%
Baschieri & Pellagri 100	<<locked>>	61%	15838	81%	**8	100%
Hodgdon TrailBoss	<<locked>>	70%	6353	32%	**6	96%
Lovex S020	<<locked>>	61%	15592	80%	**17	96%
Maxam CSB 1	<<locked>>	61%	13213	67%	**8	97%
Maxam CSB 2	<<locked>>	62%	13126	67%	**4	100%
Maxam CSB 3	<<locked>>	60%	14968	76%	**5	100%
ReloadSwiss RS 14	<<locked>>	73%	6237	32%	**9	92%
ReloadSwiss RS 20	<<locked>>	61%	11995	61%	**5	91%
[Rottweil P 806]*	<<locked>>	82%	13779	70%	**93	81%
SNPE Vectan A0	<<locked>>	61%	13532	69%	**2	90%
[SNPE Vectan BA7 1/2]*	<<locked>>	69%	13735	70%	**5	81%
SNPE Vectan BA9 1/2	<<locked>>	61%	15795	81%	**01	98%
Somchem MP200	<<locked>>	62%	16534	84%	**40	92%
Somchem MS200	<<locked>>	60%	14518	74%	**4	93%
[Vihtavuori 3N37]*	<<locked>>	63%	12705	65%	**1	81%
Vihtavuori N32C Tin Star	<<locked>>	60%	9268	47%	**7	100%
Vihtavuori N330	<<locked>>	60%	13967	71%	**7	99%
Vihtavuori N340	<<locked>>	62%	14025	72%	**1	92%
[Vihtavuori N350]*	<<locked>>	65%	12140	62%	**2	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data