Load data for 9 mm Steyr (Roth) + .356 | 125gr | H&N HP HS

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 125gr \| H&N HP HS
Bullet Weight:	125gr \| 8.1g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	<<locked>>
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7446_C1226
Last updated:	2026-01-31

Load data for 44 loads in caliber 9 mm Steyr (Roth) with .356 | 125gr | H&N HP HS bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	83%	17187	88%	**70	82%
Accurate Solo 1250	<<locked>>	66%	17463	89%	**33	100%
Alliant BE-86	<<locked>>	65%	17289	88%	**30	100%
Alliant Herco	<<locked>>	80%	17187	88%	**66	97%
Alliant UNIQUE	<<locked>>	67%	17202	88%	**73	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	81%	17390	89%	**24	100%
Hodgdon CFE Pistol	<<locked>>	63%	17376	89%	**40	100%
Maxam CSB 1	<<locked>>	68%	17245	88%	**24	100%
Maxam CSB 2	<<locked>>	69%	17434	89%	**56	100%
Maxam CSB 3	<<locked>>	63%	17419	89%	**10	100%
ReloadSwiss RS 20 👍	<<locked>>	70%	17405	89%	**89	99%
[Rottweil P 806]*	<<locked>>	85%	17550	90%	**94	89%
SNPE Vectan A0	<<locked>>	67%	17129	87%	**20	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	75%	17535	90%	**56	89%
SNPE Vectan BA9 1/2	<<locked>>	62%	17434	89%	**30	100%
[SNPE Vectan SP 2]*	<<locked>>	68%	17289	88%	**32	84%
Somchem MS200	<<locked>>	64%	17172	88%	**37	98%
Vihtavuori 3N37	<<locked>>	70%	17231	88%	**83	90%
Vihtavuori N32C Tin Star	<<locked>>	82%	17289	88%	**1	100%
Vihtavuori N330	<<locked>>	64%	17289	88%	**60	100%
Vihtavuori N340	<<locked>>	66%	17245	88%	**47	97%
Vihtavuori N350	<<locked>>	74%	17274	88%	**83	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	79%	15418	79%	**20	80%
Accurate Solo 1250	<<locked>>	60%	14576	74%	**5	99%
Alliant BE-86	<<locked>>	60%	14678	75%	**1	100%
[Alliant Herco]*	<<locked>>	62%	10370	53%	**6	89%
Alliant UNIQUE	<<locked>>	60%	14025	72%	**4	94%
Baschieri & Pellagri 102 Pistol	<<locked>>	62%	9935	51%	**0	100%
Hodgdon CFE Pistol	<<locked>>	60%	15722	80%	**04	99%
Maxam CSB 1	<<locked>>	61%	13880	71%	**2	99%
Maxam CSB 2	<<locked>>	62%	13909	71%	**4	100%
Maxam CSB 3	<<locked>>	60%	16070	82%	**1	100%
ReloadSwiss RS 20	<<locked>>	60%	12372	63%	**8	95%
[Rottweil P 806]*	<<locked>>	73%	11211	57%	**10	80%
SNPE Vectan A0	<<locked>>	61%	14156	72%	**8	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	61%	11356	58%	**6	81%
SNPE Vectan BA9 1/2	<<locked>>	60%	16360	84%	**04	100%
[SNPE Vectan SP 2]*	<<locked>>	63%	14446	74%	**60	80%
Somchem MS200	<<locked>>	62%	16143	82%	**10	97%
[Vihtavuori 3N37]*	<<locked>>	61%	12618	64%	**8	85%
Vihtavuori N32C Tin Star	<<locked>>	64%	10559	54%	**0	100%
Vihtavuori N330	<<locked>>	62%	16056	82%	**30	100%
Vihtavuori N340	<<locked>>	61%	14431	74%	**4	95%
[Vihtavuori N350]*	<<locked>>	61%	11516	59%	**9	83%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data