Load data for 9 mm Steyr (Roth) + .356 | 102gr | LEE Mold 356-102-1R

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 102gr \| LEE Mold 356-102-1R
Manufacturer SKU:	356-102-1R
Bullet Weight:	102gr \| 6.6g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.462" \| 11.7mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.253" \| 31.8mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B3267_C1226
Last updated:	2025-01-01

Load data for 40 loads in caliber 9 mm Steyr (Roth) with .356 | 102gr | LEE Mold 356-102-1R bullet and 20 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	67%	17318	88%	**88	99%
Alliant UNIQUE	<<locked>>	67%	17071	87%	**24	95%
Hodgdon Universal	<<locked>>	62%	17579	90%	**14	100%
Hodgdon TrailBoss	<<locked>>	94%	9616	49%	**9	100%
Lovex S020	<<locked>>	62%	17289	88%	**11	97%
Maxam CSB 1	<<locked>>	69%	17434	89%	**84	99%
Maxam CSB 2	<<locked>>	69%	17564	90%	**24	100%
Maxam CSB 3	<<locked>>	63%	17158	88%	**65	100%
ReloadSwiss RS 14	<<locked>>	96%	8528	44%	**6	97%
ReloadSwiss RS 20	<<locked>>	70%	16694	85%	**37	97%
[Rottweil P 806]*	<<locked>>	84%	16868	86%	**25	85%
SNPE Vectan A0	<<locked>>	68%	17100	87%	**71	95%
[SNPE Vectan BA7 1/2]*	<<locked>>	75%	17434	89%	**07	87%
Somchem MP200	<<locked>>	62%	17405	89%	**14	94%
Somchem MS200	<<locked>>	65%	17318	88%	**01	96%
[Vihtavuori 3N37]*	<<locked>>	71%	17448	89%	**47	88%
Vihtavuori N32C Tin Star	<<locked>>	82%	16969	87%	**09	100%
Vihtavuori N330	<<locked>>	65%	17318	88%	**24	100%
Vihtavuori N340	<<locked>>	67%	17448	89%	**17	96%
[Vihtavuori N350]*	<<locked>>	74%	17361	89%	**37	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	61%	14417	74%	**09	98%
Alliant UNIQUE	<<locked>>	62%	14446	74%	**42	92%
Hodgdon Universal	<<locked>>	60%	16636	85%	**88	99%
Hodgdon TrailBoss	<<locked>>	63%	4699	24%	**6	92%
Lovex S020	<<locked>>	61%	16244	83%	**84	97%
Maxam CSB 1	<<locked>>	61%	13793	70%	**86	98%
Maxam CSB 2	<<locked>>	62%	13547	69%	**22	100%
Maxam CSB 3	<<locked>>	61%	16230	83%	**42	100%
[ReloadSwiss RS 14]*	<<locked>>	65%	4395	22%	**9	85%
ReloadSwiss RS 20	<<locked>>	61%	12575	64%	**02	93%
[Rottweil P 806]*	<<locked>>	79%	13532	69%	**20	81%
SNPE Vectan A0	<<locked>>	60%	13692	70%	**73	91%
[SNPE Vectan BA7 1/2]*	<<locked>>	65%	12995	66%	**76	81%
Somchem MP200	<<locked>>	61%	16476	84%	**94	93%
Somchem MS200	<<locked>>	61%	15461	79%	**45	95%
[Vihtavuori 3N37]*	<<locked>>	61%	12154	62%	**83	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	9413	48%	**2	100%
Vihtavuori N330	<<locked>>	61%	15374	79%	**71	99%
Vihtavuori N340	<<locked>>	62%	14678	75%	**32	93%
[Vihtavuori N350]*	<<locked>>	63%	11951	61%	**66	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data