Load data for 9 mm Steyr (Roth) + .355 | 90gr | Nosler HP

Recommended Powder(s): Vihtavuori N330

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| Nosler HP
Manufacturer SKU:	42050
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.403" \| 10.2mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.194" \| 30.3mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B4154_C1226
Last updated:	2025-01-01

Load data for 40 loads in caliber 9 mm Steyr (Roth) with .355 | 90gr | Nosler HP bullet and 20 powders such as Vihtavuori N330. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	67%	17085	87%	**47	98%
Alliant UNIQUE	<<locked>>	67%	17260	88%	**93	93%
Baschieri & Pellagri 100	<<locked>>	63%	17492	89%	**20	100%
Hodgdon TrailBoss	<<locked>>	94%	10153	52%	**8	100%
Lovex S020	<<locked>>	62%	17187	88%	**76	96%
Maxam CSB 1	<<locked>>	69%	17347	89%	**47	98%
Maxam CSB 2	<<locked>>	69%	17405	89%	**96	100%
Maxam CSB 3	<<locked>>	63%	17071	87%	**30	100%
ReloadSwiss RS 14	<<locked>>	95%	9427	48%	**8	96%
ReloadSwiss RS 20	<<locked>>	72%	17245	88%	**19	96%
[Rottweil P 806]*	<<locked>>	85%	17143	88%	**01	83%
SNPE Vectan A0	<<locked>>	67%	16853	86%	**30	92%
[SNPE Vectan BA7 1/2]*	<<locked>>	75%	17172	88%	**63	84%
Somchem MP200	<<locked>>	62%	17361	89%	**80	92%
Somchem MS200	<<locked>>	64%	17274	88%	**60	94%
[Vihtavuori 3N37]*	<<locked>>	71%	17129	88%	**02	85%
Vihtavuori N32C Tin Star	<<locked>>	82%	17114	87%	**84	100%
Vihtavuori N330 👍	<<locked>>	65%	17042	87%	**93	99%
Vihtavuori N340	<<locked>>	67%	17216	88%	**70	93%
[Vihtavuori N350]*	<<locked>>	75%	17608	90%	**12	86%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate Solo 1250	<<locked>>	61%	14373	73%	**68	96%
Alliant UNIQUE	<<locked>>	62%	14721	75%	**11	90%
Baschieri & Pellagri 100	<<locked>>	61%	16621	85%	**01	100%
Hodgdon TrailBoss	<<locked>>	62%	5642	29%	**8	93%
Lovex S020	<<locked>>	61%	16114	82%	**40	94%
Maxam CSB 1	<<locked>>	61%	13779	70%	**45	96%
Maxam CSB 2	<<locked>>	61%	13793	70%	**94	99%
Maxam CSB 3	<<locked>>	61%	16099	82%	**04	100%
[ReloadSwiss RS 14]*	<<locked>>	61%	5192	26%	**2	86%
ReloadSwiss RS 20	<<locked>>	61%	12633	65%	**55	90%
[Rottweil P 806]*	<<locked>>	82%	15200	78%	**45	80%
[SNPE Vectan A0]*	<<locked>>	60%	13706	70%	**35	89%
[SNPE Vectan BA7 1/2]*	<<locked>>	69%	14518	74%	**78	80%
Somchem MP200	<<locked>>	60%	16563	85%	**53	91%
Somchem MS200	<<locked>>	61%	15563	79%	**04	92%
[Vihtavuori 3N37]*	<<locked>>	64%	13503	69%	**84	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	10095	52%	**4	100%
Vihtavuori N330	<<locked>>	61%	15185	78%	**40	98%
Vihtavuori N340	<<locked>>	62%	14765	75%	**98	91%
[Vihtavuori N350]*	<<locked>>	66%	13387	68%	**71	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data