Load data for 9 mm Steyr (Roth) + .355 | 90gr | AERO SOP,- smax:4.40

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| AERO SOP,- smax:4.40
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.563" \| 14.3mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.283" \| 32.6mm
Seated Depth:	0.193" \| 4.9mm
Shank Seated Depth:	0.193" \| 4.9mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B99_C1226
Last updated:	2025-01-01

Load data for 44 loads in caliber 9 mm Steyr (Roth) with .355 | 90gr | AERO SOP,- smax:4.40 bullet and 22 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	62%	16549	84%	**78	88%
Accurate Solo 1250	<<locked>>	67%	16447	84%	**91	97%
Alliant UNIQUE	<<locked>>	68%	17085	87%	**47	92%
Baschieri & Pellagri 100	<<locked>>	62%	16781	86%	**61	100%
Hodgdon Universal	<<locked>>	62%	17622	90%	**30	98%
Hodgdon TrailBoss	<<locked>>	95%	10414	53%	**8	99%
Lovex S020	<<locked>>	63%	16969	87%	**24	94%
Maxam CSB 1	<<locked>>	70%	16955	87%	**01	97%
Maxam CSB 2	<<locked>>	70%	16955	87%	**50	100%
Maxam CSB 3	<<locked>>	65%	17318	88%	**98	100%
ReloadSwiss RS 14	<<locked>>	93%	9311	48%	**2	95%
ReloadSwiss RS 20	<<locked>>	74%	17202	88%	**76	94%
SNPE Vectan A0	<<locked>>	71%	17477	89%	**11	92%
[SNPE Vectan BA7 1/2]*	<<locked>>	76%	16926	86%	**14	82%
SNPE Vectan BA9 1/2	<<locked>>	64%	17231	88%	**11	97%
Somchem MP200	<<locked>>	63%	17347	89%	**37	90%
Somchem MS200	<<locked>>	65%	17129	88%	**11	93%
[Vihtavuori 3N37]*	<<locked>>	73%	16955	87%	**50	83%
Vihtavuori N32C Tin Star	<<locked>>	83%	16839	86%	**42	100%
Vihtavuori N330 👍	<<locked>>	67%	17477	89%	**66	99%
Vihtavuori N340	<<locked>>	68%	17187	88%	**30	92%
[Vihtavuori N350]*	<<locked>>	77%	17463	89%	**63	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	60%	15708	80%	**52	87%
Accurate Solo 1250	<<locked>>	60%	13750	70%	**06	95%
[Alliant UNIQUE]*	<<locked>>	60%	13779	70%	**32	88%
Baschieri & Pellagri 100	<<locked>>	60%	15795	81%	**32	99%
Hodgdon Universal	<<locked>>	60%	16665	85%	**11	98%
[Hodgdon TrailBoss]²	<<locked>>	59%	5831	30%	**2	93%
Lovex S020	<<locked>>	61%	16085	82%	**98	93%
Maxam CSB 1	<<locked>>	61%	13329	68%	**86	94%
Maxam CSB 2	<<locked>>	61%	13300	68%	**42	99%
Maxam CSB 3	<<locked>>	60%	15200	78%	**38	99%
[ReloadSwiss RS 14]*	<<locked>>	62%	5903	30%	**8	88%
[ReloadSwiss RS 20]*	<<locked>>	62%	12488	64%	**12	88%
[SNPE Vectan A0]*	<<locked>>	60%	13314	68%	**76	87%
[SNPE Vectan BA7 1/2]*	<<locked>>	73%	15664	80%	**71	80%
SNPE Vectan BA9 1/2	<<locked>>	62%	16375	84%	**88	97%
[Somchem MP200]*	<<locked>>	62%	16621	85%	**07	89%
Somchem MS200	<<locked>>	61%	15432	79%	**58	91%
[Vihtavuori 3N37]*	<<locked>>	69%	15345	78%	**04	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	10240	52%	**1	100%
Vihtavuori N330	<<locked>>	61%	14663	75%	**81	97%
[Vihtavuori N340]*	<<locked>>	60%	13634	70%	**15	88%
[Vihtavuori N350]*	<<locked>>	71%	15171	77%	**94	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data