Load data for 9 mm Steyr (Roth) + .355 | 75gr | CutEdge HGHP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| CutEdge HGHP
Manufacturer SKU:	HGHP 380 75
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.440" \| 11.2mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.231" \| 31.3mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B8532_C1226
Last updated:	2026-01-21

Load data for 54 loads in caliber 9 mm Steyr (Roth) with .355 | 75gr | CutEdge HGHP bullet and 27 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	64%	17347	89%	**48	86%
Accurate Solo 1250	<<locked>>	69%	17274	88%	**71	96%
Alliant UNIQUE	<<locked>>	70%	17434	89%	**11	90%
Baschieri & Pellagri 100	<<locked>>	65%	17434	89%	**32	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	85%	17463	89%	**75	100%
Baschieri & Pellagri 103 Pistol	<<locked>>	63%	17390	89%	**75	100%
Hodgdon Universal	<<locked>>	63%	17289	88%	**88	97%
Hodgdon CFE Pistol	<<locked>>	66%	17361	89%	**75	96%
Hodgdon TrailBoss	<<locked>>	95%	10182	52%	**76	98%
Lovex S020	<<locked>>	66%	17492	89%	**94	93%
Maxam CSB 1	<<locked>>	72%	17477	89%	**68	96%
Maxam CSB 2 👍	<<locked>>	72%	17318	88%	**27	100%
Maxam CSB 3	<<locked>>	66%	17216	88%	**58	99%
Maxam CSB 4	<<locked>>	63%	17579	90%	**52	100%
ReloadSwiss RS 14	<<locked>>	95%	9340	48%	**50	93%
ReloadSwiss RS 20	<<locked>>	74%	16940	87%	**27	92%
SNPE Vectan A0	<<locked>>	71%	17390	89%	**52	90%
SNPE Vectan BA 9	<<locked>>	63%	17129	87%	**39	94%
SNPE Vectan BA9 1/2	<<locked>>	65%	17419	89%	**75	96%
[Somchem MP200]*	<<locked>>	64%	17593	90%	**98	89%
Somchem MS200	<<locked>>	67%	17492	89%	**78	91%
[Vihtavuori 3N37]*	<<locked>>	75%	17550	90%	**27	82%
Vihtavuori N320	<<locked>>	64%	17550	90%	**75	100%
Vihtavuori N32C Tin Star	<<locked>>	86%	17332	89%	**12	100%
Vihtavuori N330	<<locked>>	68%	17318	88%	**17	98%
Vihtavuori N340	<<locked>>	71%	17564	90%	**94	90%
[Vihtavuori N350]*	<<locked>>	78%	17608	90%	**17	82%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	62%	15954	81%	**09	85%
Accurate Solo 1250	<<locked>>	61%	13532	69%	**40	93%
[Alliant UNIQUE]*	<<locked>>	62%	13822	71%	**76	85%
Baschieri & Pellagri 100	<<locked>>	61%	15751	80%	**80	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	62%	9935	51%	**02	95%
Baschieri & Pellagri 103 Pistol	<<locked>>	61%	15940	81%	**32	99%
Hodgdon Universal	<<locked>>	60%	16273	83%	**52	96%
Hodgdon CFE Pistol	<<locked>>	61%	15142	77%	**99	94%
Hodgdon TrailBoss	<<locked>>	75%	7368	38%	**5	94%
Lovex S020	<<locked>>	61%	14997	77%	**09	90%
Maxam CSB 1	<<locked>>	61%	13126	67%	**20	92%
Maxam CSB 2	<<locked>>	61%	12749	65%	**73	97%
Maxam CSB 3	<<locked>>	61%	15185	78%	**89	98%
Maxam CSB 4	<<locked>>	60%	16128	82%	**09	100%
[ReloadSwiss RS 14]*	<<locked>>	78%	7252	37%	**8	89%
[ReloadSwiss RS 20]*	<<locked>>	61%	11879	61%	**14	84%
[SNPE Vectan A0]*	<<locked>>	60%	13053	67%	**94	84%
SNPE Vectan BA 9	<<locked>>	61%	15983	82%	**99	93%
SNPE Vectan BA9 1/2	<<locked>>	61%	15795	81%	**16	95%
[Somchem MP200]*	<<locked>>	60%	15635	80%	**25	86%
[Somchem MS200]*	<<locked>>	61%	14736	75%	**80	88%
[Vihtavuori 3N37]*	<<locked>>	73%	16607	85%	**88	80%
Vihtavuori N320	<<locked>>	62%	16520	84%	**48	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	9790	50%	**60	100%
Vihtavuori N330	<<locked>>	61%	14054	72%	**12	95%
[Vihtavuori N340]*	<<locked>>	62%	13895	71%	**66	86%
[Vihtavuori N350]*	<<locked>>	75%	16244	83%	**75	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data