Load data for 9 mm Steyr (Roth) + .355 | 124gr | Speer Hollow Point Gold Dot

Recommended Powder(s): ReloadSwiss RS 20

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 124gr \| Speer Hollow Point Gold Dot
Manufacturer SKU:	3998
Bullet Weight:	124gr \| 8.0g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	<<locked>>
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6204_C1226
Last updated:	2025-02-02

Load data for 0 loads in caliber 9 mm Steyr (Roth) with .355 | 124gr | Speer Hollow Point Gold Dot bullet and 0 powders such as ReloadSwiss RS 20. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	80%	17274	88%	**73	82%
Accurate Solo 1250	<<locked>>	64%	17593	90%	**33	100%
Alliant BE-86	<<locked>>	64%	17492	89%	**33	100%
Alliant Herco	<<locked>>	78%	17477	89%	**73	97%
[Alliant POWER PISTOL]*	<<locked>>	66%	17332	89%	**02	81%
Alliant UNIQUE	<<locked>>	65%	17521	89%	**79	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	78%	17579	90%	**27	100%
Maxam CSB 1	<<locked>>	66%	17274	88%	**27	100%
Maxam CSB 2	<<locked>>	66%	17289	88%	**53	100%
ReloadSwiss RS 20 👍	<<locked>>	69%	17419	89%	**96	99%
[Rottweil P 806]*	<<locked>>	82%	17492	89%	**88	89%
SNPE Vectan A0	<<locked>>	65%	17129	87%	**24	96%
[SNPE Vectan BA7 1/2]*	<<locked>>	73%	17506	89%	**63	89%
[SNPE Vectan SP 2]*	<<locked>>	66%	17535	90%	**45	85%
Somchem MS200	<<locked>>	62%	17347	89%	**43	98%
Vihtavuori 3N37	<<locked>>	68%	17202	88%	**89	91%
Vihtavuori N32C Tin Star	<<locked>>	79%	17114	87%	**5	100%
Vihtavuori N330	<<locked>>	62%	17564	90%	**66	100%
Vihtavuori N340	<<locked>>	64%	17260	88%	**50	97%
Vihtavuori N350	<<locked>>	72%	17260	88%	**86	91%
Winchester AutoComp	<<locked>>	65%	17202	88%	**40	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	76%	15505	79%	**27	80%
Accurate Solo 1250	<<locked>>	61%	15882	81%	**4	100%
Alliant BE-86	<<locked>>	61%	15853	81%	**01	100%
Alliant Herco	<<locked>>	60%	11023	56%	**9	90%
[Alliant POWER PISTOL]*	<<locked>>	65%	16389	84%	**79	80%
Alliant UNIQUE	<<locked>>	61%	15418	79%	**20	95%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	10457	53%	**3	100%
Maxam CSB 1	<<locked>>	62%	15200	78%	**4	99%
Maxam CSB 2	<<locked>>	60%	14446	74%	**1	100%
ReloadSwiss RS 20	<<locked>>	61%	13590	69%	**4	96%
[Rottweil P 806]*	<<locked>>	70%	11560	59%	**17	81%
SNPE Vectan A0	<<locked>>	61%	15156	77%	**4	95%
[SNPE Vectan BA7 1/2]*	<<locked>>	61%	12357	63%	**5	82%
[SNPE Vectan SP 2]*	<<locked>>	62%	14910	76%	**73	81%
Somchem MS200	<<locked>>	60%	16317	83%	**17	97%
[Vihtavuori 3N37]*	<<locked>>	61%	13750	70%	**1	86%
Vihtavuori N32C Tin Star	<<locked>>	62%	11211	57%	**0	100%
Vihtavuori N330	<<locked>>	60%	16317	83%	**37	100%
Vihtavuori N340	<<locked>>	61%	15824	81%	**17	96%
[Vihtavuori N350]*	<<locked>>	61%	12604	64%	**1	85%
Winchester AutoComp	<<locked>>	61%	15418	79%	**7	99%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data