Load data for 9 mm Steyr (Roth) + .355 | 124gr | Frontier RN PCB

Recommended Powder(s): Vihtavuori N330

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 124gr \| Frontier RN PCB
Manufacturer SKU:	PCB RN 9mm 124
Bullet Weight:	124gr \| 8.0g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.587" \| 14.9mm
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	1.104" \| 28.0mm
Seated Depth:	0.396" \| 10.1mm
Shank Seated Depth:	0.396" \| 10.1mm
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B10732_C1226
Last updated:	2025-01-01

Load data for 46 loads in caliber 9 mm Steyr (Roth) with .355 | 124gr | Frontier RN PCB bullet and 23 powders such as Vihtavuori N330. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	64%	16041	82%	**3	87%
Accurate Solo 1250	<<locked>>	71%	16679	85%	**9	97%
Alliant UNIQUE	<<locked>>	73%	17521	90%	**5	92%
Baschieri & Pellagri 100	<<locked>>	64%	16172	83%	**0	99%
Hodgdon Universal	<<locked>>	63%	16679	85%	**9	98%
Lovex S020	<<locked>>	68%	17303	88%	**5	95%
Maxam CSB 1	<<locked>>	76%	17622	90%	**2	98%
Maxam CSB 2	<<locked>>	74%	16462	84%	**8	100%
Maxam CSB 3	<<locked>>	66%	16578	85%	**6	100%
Maxam CSB 4	<<locked>>	64%	16650	85%	**3	100%
ReloadSwiss RS 12	<<locked>>	64%	16940	87%	**5	100%
ReloadSwiss RS 20	<<locked>>	77%	16984	87%	**2	94%
SNPE Vectan A0	<<locked>>	73%	17216	88%	**3	91%
SNPE Vectan BA 9	<<locked>>	65%	16694	85%	**9	95%
SNPE Vectan BA9 1/2	<<locked>>	66%	16592	85%	**3	97%
Somchem MP200	<<locked>>	67%	17376	89%	**5	90%
Somchem MS200	<<locked>>	69%	16868	86%	**2	93%
[Vihtavuori 3N37]*	<<locked>>	79%	17318	88%	**2	84%
Vihtavuori N320	<<locked>>	65%	16955	87%	**6	100%
Vihtavuori N32C Tin Star	<<locked>>	85%	15824	81%	**7	100%
Vihtavuori N330 👍	<<locked>>	69%	16230	83%	**5	99%
Vihtavuori N340	<<locked>>	71%	16462	84%	**6	92%
[Vihtavuori N350]*	<<locked>>	80%	16853	86%	**5	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[Accurate No. 2]*	<<locked>>	61%	14823	76%	**3	86%
Accurate Solo 1250	<<locked>>	60%	12604	64%	**7	94%
[Alliant UNIQUE]*	<<locked>>	63%	13605	69%	**7	88%
Baschieri & Pellagri 100	<<locked>>	60%	14765	75%	**0	99%
[Hodgdon Universal]²	<<locked>>	59%	14939	76%	**3	97%
Lovex S020	<<locked>>	61%	14402	74%	**0	92%
Maxam CSB 1	<<locked>>	61%	12459	64%	**4	94%
Maxam CSB 2	<<locked>>	63%	12488	64%	**0	99%
Maxam CSB 3	<<locked>>	62%	14852	76%	**3	99%
Maxam CSB 4	<<locked>>	60%	15243	78%	**0	100%
ReloadSwiss RS 12	<<locked>>	60%	15331	78%	**9	100%
[ReloadSwiss RS 20]*	<<locked>>	60%	11081	57%	**8	86%
[SNPE Vectan A0]*²	<<locked>>	59%	12241	62%	**8	85%
SNPE Vectan BA 9	<<locked>>	61%	15302	78%	**7	94%
SNPE Vectan BA9 1/2	<<locked>>	62%	15302	78%	**3	96%
[Somchem MP200]*	<<locked>>	61%	14997	77%	**6	88%
Somchem MS200	<<locked>>	62%	14547	74%	**3	90%
[Vihtavuori 3N37]*	<<locked>>	73%	14968	76%	**6	81%
Vihtavuori N320	<<locked>>	61%	14924	76%	**0	100%
Vihtavuori N32C Tin Star	<<locked>>	63%	10109	52%	**6	100%
Vihtavuori N330	<<locked>>	62%	13474	69%	**6	97%
[Vihtavuori N340]*	<<locked>>	61%	12691	65%	**1	87%
[Vihtavuori N350]*	<<locked>>	74%	14446	74%	**3	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data