
Load Specifications
Load data in caliber 9 mm Steyr with .355 | 115gr | Barnes TAC-XP bullet and 32 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Baschieri & Pellagri 102 Pistol, Vihtavuori N32C Tin Star and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 2*² | <<locked>> | 64% | 16,418 psi | 84% | 948 fps | 88.1% |
| Accurate Solo 1250² | <<locked>> | 72% | 17,231 psi | 88% | 984 fps | 97.9% |
| Alliant BE-86² | <<locked>> | 68% | 16,230 psi | 83% | 968 fps | 99.1% |
| Alliant Green Dot² | <<locked>> | 64% | 17,347 psi | 89% | 955 fps | 100% |
| Alliant Herco* | <<locked>> | 84% | 16,853 psi | 86% | 1007 fps | 92.4% |
| Alliant RED DOT² | <<locked>> | 64% | 17,434 psi | 89% | 942 fps | 100% |
| Alliant UNIQUE*² | <<locked>> | 72% | 17,027 psi | 87% | 1014 fps | 92.4% |
| Baschieri & Pellagri 100² | <<locked>> | 64% | 16,201 psi | 83% | 928 fps | 99.6% |
| Baschieri & Pellagri 102 Pistol | <<locked>> | 84% | 16,317 psi | 83% | 968 fps | 100% |
| Baschieri & Pellagri 103 Pistol² | <<locked>> | 64% | 16,563 psi | 85% | 974 fps | 100% |
| Hodgdon Clays² | <<locked>> | 64% | 16,027 psi | 82% | 856 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 10,153 psi | 52% | 771 fps | 99.5% |
| Hodgdon Universal² | <<locked>> | 64% | 17,202 psi | 88% | 994 fps | 98.5% |
| Lovex S020*² | <<locked>> | 64% | 15,389 psi | 79% | 958 fps | 93.4% |
| Maxam CSB 1² | <<locked>> | 72% | 16,505 psi | 84% | 965 fps | 97.6% |
| Maxam CSB 2² | <<locked>> | 72% | 16,114 psi | 82% | 1001 fps | 100% |
| Maxam CSB 3² | <<locked>> | 68% | 17,405 psi | 89% | 974 fps | 99.9% |
| Maxam CSB 4² | <<locked>> | 64% | 16,781 psi | 86% | 948 fps | 100% |
| ReloadSwiss RS 12² | <<locked>> | 64% | 17,318 psi | 88% | 1014 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 9,413 psi | 48% | 764 fps | 96.1% |
| ReloadSwiss RS 20*² | <<locked>> | 76% | 16,723 psi | 85% | 1027 fps | 94.5% |
| SNPE Vectan A0*² | <<locked>> | 72% | 16,839 psi | 86% | 961 fps | 91.7% |
| SNPE Vectan A1² | <<locked>> | 64% | 17,056 psi | 87% | 961 fps | 98.8% |
| SNPE Vectan BA 9² | <<locked>> | 64% | 16,302 psi | 83% | 945 fps | 95.5% |
| SNPE Vectan BA9 1/2² | <<locked>> | 64% | 16,143 psi | 82% | 958 fps | 97% |
| Somchem MP200*² | <<locked>> | 64% | 16,389 psi | 84% | 981 fps | 90% |
| Somchem MS200*² | <<locked>> | 68% | 16,534 psi | 84% | 971 fps | 93% |
| Vihtavuori N320² | <<locked>> | 64% | 16,795 psi | 86% | 968 fps | 100% |
| Vihtavuori N32C Tin Star | <<locked>> | 96% | 17,114 psi | 87% | 928 fps | 100% |
| Vihtavuori N330² | <<locked>> | 68% | 17,318 psi | 88% | 1024 fps | 99.2% |
| Vihtavuori N340*² | <<locked>> | 72% | 17,593 psi | 90% | 1004 fps | 93.2% |
| Winchester AutoComp ² | <<locked>> | 72% | 17,013 psi | 87% | 991 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 5"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate No. 2*² | <<locked>> | 60% | 13,996 psi | 71% | 889 fps | 85.3% |
| Accurate Solo 1250*² | <<locked>> | 60% | 12,502 psi | 64% | 866 fps | 94% |
| Alliant BE-86² | <<locked>> | 60% | 12,778 psi | 65% | 883 fps | 96.9% |
| Alliant Green Dot² | <<locked>> | 60% | 15,563 psi | 79% | 915 fps | 99.9% |
| Alliant Herco*² | <<locked>> | 68% | 11,487 psi | 59% | 853 fps | 85.4% |
| Alliant RED DOT² | <<locked>> | 60% | 15,461 psi | 79% | 902 fps | 100% |
| Alliant UNIQUE*² | <<locked>> | 60% | 12,241 psi | 63% | 876 fps | 86.4% |
| Baschieri & Pellagri 100² | <<locked>> | 60% | 14,475 psi | 74% | 889 fps | 99% |
| Baschieri & Pellagri 102 Pistol² | 3 gr | 60% | 8,514 psi | 43% | 751 fps | 95.5% |
| Baschieri & Pellagri 103 Pistol² | <<locked>> | 60% | 14,620 psi | 75% | 928 fps | 99.6% |
| Hodgdon Clays² | <<locked>> | 60% | 15,069 psi | 77% | 837 fps | 100% |
| Hodgdon TrailBoss*² | 1.7 gr | 60% | 5,149 psi | 26% | 554 fps | 91.2% |
| Hodgdon Universal² | <<locked>> | 60% | 14,823 psi | 76% | 935 fps | 97% |
| Lovex S020*² | <<locked>> | 60% | 13,851 psi | 71% | 919 fps | 91.8% |
| Maxam CSB 1*² | <<locked>> | 60% | 12,111 psi | 62% | 846 fps | 93.6% |
| Maxam CSB 2² | <<locked>> | 60% | 11,647 psi | 59% | 886 fps | 98.2% |
| Maxam CSB 3² | <<locked>> | 60% | 14,025 psi | 72% | 896 fps | 98.7% |
| Maxam CSB 4² | <<locked>> | 60% | 14,968 psi | 76% | 906 fps | 100% |
| ReloadSwiss RS 12² | <<locked>> | 60% | 15,664 psi | 80% | 978 fps | 100% |
| ReloadSwiss RS 14*² | <<locked>> | 60% | 5,134 psi | 26% | 558 fps | 85.6% |
| ReloadSwiss RS 20*² | <<locked>> | 60% | 10,994 psi | 56% | 856 fps | 86.5% |
| SNPE Vectan A0*² | <<locked>> | 60% | 12,067 psi | 62% | 833 fps | 85.6% |
| SNPE Vectan A1² | <<locked>> | 60% | 15,490 psi | 79% | 925 fps | 98% |
| SNPE Vectan BA 9*² | <<locked>> | 60% | 14,866 psi | 76% | 909 fps | 94.2% |
| SNPE Vectan BA9 1/2² | <<locked>> | 60% | 14,547 psi | 74% | 919 fps | 95.7% |
| Somchem MP200*² | <<locked>> | 60% | 14,344 psi | 73% | 925 fps | 87.6% |
| Somchem MS200*² | <<locked>> | 60% | 13,677 psi | 70% | 896 fps | 89.8% |
| Vihtavuori N320² | <<locked>> | 60% | 14,982 psi | 77% | 928 fps | 100% |
| Vihtavuori N32C Tin Star² | 2.4 gr | 60% | 7,919 psi | 40% | 702 fps | 99.9% |
| Vihtavuori N330² | <<locked>> | 60% | 13,314 psi | 68% | 925 fps | 96.7% |
| Vihtavuori N340*² | <<locked>> | 60% | 12,488 psi | 64% | 873 fps | 87.3% |
| Winchester AutoComp *² | <<locked>> | 60% | 12,517 psi | 64% | 873 fps | 92.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 32 powders for 9 mm Steyr loaded with the .355 | 115gr | Barnes TAC-XP. ReloadSwiss RS 20 delivers the highest muzzle velocity at 1,027 fps; across all powders the maximum-charge window runs from 764 fps to 1,027 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 32 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (135 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Baschieri & Pellagri 102 Pistol, Vihtavuori N32C Tin Star, Hodgdon TrailBoss rank at the top here: for 9 mm Steyr with the .355 | 115gr | Barnes TAC-XP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate No. 2, Alliant Herco, Alliant UNIQUE burn incompletely and react more sensitively to barrel length and temperature. Accurate No. 2, Accurate Solo 1250, Alliant BE-86 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.