Load data for 9 mm Browning Court (.380 ACP) + .358 | 105gr | LEE Mold 358-105-SWC

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.358 \| 105gr \| LEE Mold 358-105-SWC
Manufacturer SKU:	358-105-SWC
Bullet Weight:	105gr \| 6.8g
Bullet Diameter:	0.358" \| 9.09mm
Bullet Length:	<<locked>>
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B3272_C1213
Last updated:	2026-02-02

Load data for 84 loads in caliber 9 mm Browning Court (.380 ACP) with .358 | 105gr | LEE Mold 358-105-SWC bullet and 42 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	77%	17492	89%	**27	96%
ADI APS 350	<<locked>>	67%	16621	85%	**3	100%
ADI APS 450	<<locked>>	71%	17260	88%	**2	100%
ADI AS 30	<<locked>>	79%	16955	87%	**5	100%
ADI AS 50N	<<locked>>	79%	17477	89%	**1	99%
[Accurate No. 2]*	<<locked>>	79%	16737	86%	**8	82%
Accurate Solo 1000	<<locked>>	76%	16868	86%	**8	99%
Accurate Solo 1250	<<locked>>	90%	17303	88%	**1	94%
Alliant BE-86	<<locked>>	89%	16897	86%	**01	97%
[Alliant BULLSEYE]*	<<locked>>	75%	16781	86%	**1	88%
[Alliant Sport Pistol]*	<<locked>>	71%	17158	88%	**7	87%
[Alliant UNIQUE]*	<<locked>>	93%	17158	88%	**30	88%
Baschieri & Pellagri 100	<<locked>>	83%	17332	89%	**1	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	96%	12270	63%	**9	97%
Baschieri & Pellagri 103 Pistol	<<locked>>	82%	17158	88%	**07	99%
Hodgdon Clays	<<locked>>	67%	16694	85%	**3	100%
Hodgdon Universal	<<locked>>	86%	17492	89%	**27	96%
Hodgdon CFE Pistol	<<locked>>	87%	17347	89%	**07	94%
Lovex S011	<<locked>>	68%	16824	86%	**5	96%
Lovex S020	<<locked>>	85%	17085	87%	**10	90%
Maxam CSB 1	<<locked>>	93%	17042	87%	**4	94%
Maxam CSB 2 👍	<<locked>>	97%	16172	83%	**50	99%
Maxam CSB 3	<<locked>>	87%	17608	90%	**4	98%
Maxam CSB 4	<<locked>>	81%	17202	88%	**8	100%
Maxam CSB 5	<<locked>>	75%	17129	88%	**1	100%
[Ramshot Silhouette]*	<<locked>>	75%	17202	88%	**04	84%
Ramshot Zip	<<locked>>	62%	17042	87%	**1	96%
ReloadSwiss RS 12	<<locked>>	86%	17260	88%	**70	100%
[ReloadSwiss RS 20]*	<<locked>>	95%	17042	87%	**27	89%
Rottweil P 801	<<locked>>	77%	17013	87%	**24	100%
[SNPE Vectan A0]*	<<locked>>	90%	17013	87%	**1	86%
SNPE Vectan BA 9	<<locked>>	81%	17535	90%	**8	92%
SNPE Vectan BA10	<<locked>>	66%	17245	88%	**2	100%
SNPE Vectan BA9 1/2	<<locked>>	85%	17332	89%	**7	94%
[Somchem MP200]*	<<locked>>	83%	17245	88%	**04	86%
[Somchem MS200]*	<<locked>>	86%	17085	87%	**4	89%
Vihtavuori N310	<<locked>>	66%	17434	89%	**2	100%
Vihtavuori N320 👍	<<locked>>	83%	16636	85%	**4	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	10457	53%	**0	100%
Vihtavuori N330	<<locked>>	88%	16911	86%	**30	96%
[Vihtavuori N340]*	<<locked>>	91%	17448	89%	**04	88%
Winchester 231	<<locked>>	69%	17042	87%	**1	96%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	61%	10457	53%	**6	88%
ADI APS 350	<<locked>>	64%	15476	79%	**3	100%
ADI APS 450	<<locked>>	64%	14098	72%	**7	100%
ADI AS 30	<<locked>>	67%	12140	62%	**3	100%
ADI AS 50N	<<locked>>	64%	11371	58%	**7	95%
[Accurate No. 2]*	<<locked>>	75%	14982	77%	**9	80%
Accurate Solo 1000	<<locked>>	65%	12401	63%	**7	96%
[Accurate Solo 1250]*	<<locked>>	73%	10733	55%	**0	87%
[Alliant BE-86]*	<<locked>>	70%	9703	50%	**0	89%
[Alliant BULLSEYE]*	<<locked>>	62%	11284	58%	**3	80%
[Alliant Sport Pistol]*	<<locked>>	62%	13010	66%	**6	82%
[Alliant UNIQUE]*	<<locked>>	79%	11951	61%	**9	81%
Baschieri & Pellagri 100	<<locked>>	68%	11284	58%	**3	93%
Baschieri & Pellagri 102 Pistol	<<locked>>	87%	9805	50%	**0	94%
Baschieri & Pellagri 103 Pistol	<<locked>>	65%	9776	50%	**3	92%
Hodgdon Clays	<<locked>>	61%	14373	73%	**3	100%
[Hodgdon Universal]*	<<locked>>	66%	9935	51%	**7	87%
[Hodgdon CFE Pistol]*	<<locked>>	68%	10080	51%	**3	85%
Lovex S011	<<locked>>	60%	13198	67%	**3	92%
[Lovex S020]*	<<locked>>	68%	9993	51%	**7	81%
[Maxam CSB 1]*	<<locked>>	76%	10820	55%	**0	87%
Maxam CSB 2	<<locked>>	74%	8412	43%	**3	90%
Maxam CSB 3	<<locked>>	69%	10921	56%	**0	93%
Maxam CSB 4	<<locked>>	66%	11124	57%	**0	96%
Maxam CSB 5	<<locked>>	61%	11124	57%	**7	100%
[Ramshot Silhouette]*	<<locked>>	69%	14214	73%	**5	81%
Ramshot Zip	<<locked>>	61%	16143	82%	**1	95%
ReloadSwiss RS 12	<<locked>>	63%	8137	42%	**3	93%
[ReloadSwiss RS 20]*	<<locked>>	80%	11385	58%	**9	81%
Rottweil P 801	<<locked>>	62%	10428	53%	**3	99%
[SNPE Vectan A0]*	<<locked>>	78%	12604	64%	**3	81%
[SNPE Vectan BA 9]*	<<locked>>	66%	11618	59%	**3	85%
[SNPE Vectan BA10]²	<<locked>>	59%	14069	72%	**7	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	67%	10559	54%	**3	86%
[Somchem MP200]*	<<locked>>	75%	13373	68%	**2	81%
[Somchem MS200]*	<<locked>>	70%	11081	57%	**3	81%
Vihtavuori N310	<<locked>>	62%	15069	77%	**2	100%
Vihtavuori N320	<<locked>>	65%	9747	50%	**3	95%
Vihtavuori N32C Tin Star	<<locked>>	92%	9776	50%	**3	100%
[Vihtavuori N330]*	<<locked>>	69%	9529	49%	**3	86%
[Vihtavuori N340]*	<<locked>>	77%	11908	61%	**9	81%
Winchester 231	<<locked>>	61%	12995	66%	**6	92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data