top of page

Load data for 9 mm Browning Court (.380 ACP) + .356 | 125gr | H&N HP HS

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

9 mm Browning Court (.380 ACP) + .356 | 125gr | H&N HP HS

Load Specifications

Bullet:
.356 | 125gr | H&N HP HS
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.589" | 15.0mm
Caliber:
9 mm Browning Court (.380 ACP)
Case Length (l3):
0.681" | 17.3mm
Cartridge Length (C.O.L.):
0.969" | 24.6mm
Seated Depth:
0.301" | 7.6mm
Shank Seated Depth:
0.281" | 7.1mm
Case Capacity:
12.2 Grains of Water | 0.79 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
19580 psi | 1350 bar
LID:
LID_B7446_C1213

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber 9 mm Browning Court (.380 ACP) with .356 | 125gr | H&N HP HS bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 70N
<<locked>>
78%
15679
80%
**3
94%
ADI APS 450
<<locked>>
74%
16868
86%
**1
100%
ADI AS 30
<<locked>>
81%
15708
80%
**4
100%
ADI AS 50N
<<locked>>
84%
17550
90%
**3
99%
Accurate Solo 1000
<<locked>>
82%
17608
90%
**4
99%
Accurate Solo 1250
<<locked>>
93%
16679
85%
**0
94%
[Alliant BULLSEYE]*
<<locked>>
79%
16679
85%
**7
87%
[Alliant UNIQUE]*
<<locked>>
92%
14605
75%
**7
85%
Baschieri & Pellagri 100
<<locked>>
88%
17085
87%
**1
98%
Hodgdon Universal
<<locked>>
87%
15679
80%
**3
94%
Lovex S011
<<locked>>
72%
17187
88%
**4
95%
Lovex S020
<<locked>>
90%
17492
89%
**0
90%
Maxam CSB 1
<<locked>>
94%
15389
79%
**7
93%
Maxam CSB 2
<<locked>>
92%
11951
61%
**1
96%
Maxam CSB 3
<<locked>>
91%
17376
89%
**7
98%
Maxam CSB 4 👍
<<locked>>
86%
17477
89%
**0
100%
Maxam CSB 5
<<locked>>
77%
15708
80%
**8
100%
Ramshot Zip
<<locked>>
66%
17521
89%
**0
96%
ReloadSwiss RS 12
<<locked>>
89%
15548
79%
**6
100%
[ReloadSwiss RS 20]*
<<locked>>
94%
14504
74%
**4
85%
Rottweil P 801 👍
<<locked>>
80%
15824
81%
**6
100%
[SNPE Vectan A0]*
<<locked>>
93%
16259
83%
**7
85%
SNPE Vectan BA 9
<<locked>>
81%
15519
79%
**1
90%
SNPE Vectan BA10
<<locked>>
69%
16839
86%
**1
100%
SNPE Vectan BA9 1/2
<<locked>>
86%
15853
81%
**7
93%
[Somchem MP200]*
<<locked>>
85%
15882
81%
**4
84%
[Somchem MS200]*
<<locked>>
91%
16882
86%
**3
88%
Vihtavuori N310
<<locked>>
66%
15273
78%
**1
100%
Vihtavuori N320
<<locked>>
89%
17231
88%
**6
100%
Vihtavuori N330
<<locked>>
91%
15838
81%
**3
95%
[Vihtavuori N340]*
<<locked>>
95%
17172
88%
**3
87%
Winchester 231
<<locked>>
74%
17521
89%
**0
96%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AP 70N]*
<<locked>>
64%
9877
50%
**2
87%
ADI APS 450
<<locked>>
67%
14098
72%
**9
100%
ADI AS 30
<<locked>>
68%
10936
56%
**2
99%
ADI AS 50N
<<locked>>
66%
10834
55%
**9
94%
Accurate Solo 1000
<<locked>>
63%
10588
54%
**6
94%
[Accurate Solo 1250]*
<<locked>>
76%
10515
54%
**9
86%
[Alliant BULLSEYE]*
<<locked>>
68%
12357
63%
**5
82%
[Alliant UNIQUE]*
<<locked>>
87%
12705
65%
**4
82%
Baschieri & Pellagri 100
<<locked>>
70%
10486
54%
**3
92%
[Hodgdon Universal]*
<<locked>>
71%
9877
50%
**2
87%
Lovex S011
<<locked>>
62%
12560
64%
**5
91%
[Lovex S020]*
<<locked>>
75%
11110
57%
**2
82%
[Maxam CSB 1]*
<<locked>>
77%
9834
50%
**3
85%
[Maxam CSB 2]*
<<locked>>
75%
7455
38%
**3
88%
Maxam CSB 3
<<locked>>
73%
10805
55%
**6
92%
Maxam CSB 4
<<locked>>
68%
10472
53%
**6
95%
Maxam CSB 5
<<locked>>
64%
10849
55%
**9
100%
Ramshot Zip
<<locked>>
62%
15026
77%
**4
94%
ReloadSwiss RS 12
<<locked>>
68%
8166
42%
**2
94%
[ReloadSwiss RS 20]*
<<locked>>
89%
12589
64%
**1
82%
Rottweil P 801
<<locked>>
60%
8064
41%
**9
96%
[SNPE Vectan A0]*
<<locked>>
87%
14185
72%
**8
82%
[SNPE Vectan BA 9]*
<<locked>>
70%
11792
60%
**2
85%
SNPE Vectan BA10
<<locked>>
62%
14083
72%
**9
100%
[SNPE Vectan BA9 1/2]*
<<locked>>
70%
10109
52%
**2
85%
[Somchem MP200]*
<<locked>>
81%
14025
72%
**4
81%
[Somchem MS200]*
<<locked>>
75%
11153
57%
**9
80%
Vihtavuori N310
<<locked>>
60%
12270
63%
**5
100%
Vihtavuori N320
<<locked>>
65%
8572
44%
**9
92%
[Vihtavuori N330]*
<<locked>>
70%
8731
45%
**3
84%
[Vihtavuori N340]*
<<locked>>
84%
12676
65%
**8
82%
[Winchester 231]*
<<locked>>
60%
11255
57%
**2
89%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page