Load data for 9 mm Browning Court (.380 ACP) + .356 | 102gr | LEE Mold 356-102-1R

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 102gr \| LEE Mold 356-102-1R
Manufacturer SKU:	356-102-1R
Bullet Weight:	102gr \| 6.6g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	0.462" \| 11.7mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.174" \| 4.4mm
Shank Seated Depth:	0.174" \| 4.4mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B3267_C1213
Last updated:	2026-01-20

Load data for 72 loads in caliber 9 mm Browning Court (.380 ACP) with .356 | 102gr | LEE Mold 356-102-1R bullet and 36 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	72%	17318	88%	**83	97%
ADI APS 450	<<locked>>	68%	17463	89%	**1	100%
ADI AS 30	<<locked>>	75%	16998	87%	**01	100%
ADI AS 50N	<<locked>>	74%	17013	87%	**27	100%
[Accurate No. 2]*	<<locked>>	76%	17071	87%	**14	85%
Accurate Solo 1000	<<locked>>	73%	17535	90%	**07	100%
Accurate Solo 1250	<<locked>>	84%	17013	87%	**47	96%
Alliant BULLSEYE	<<locked>>	71%	16752	86%	**53	90%
[Alliant Sport Pistol]*	<<locked>>	67%	16853	86%	**56	89%
Alliant UNIQUE	<<locked>>	88%	17448	89%	**02	90%
Baschieri & Pellagri 100	<<locked>>	79%	17448	89%	**24	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	97%	14431	74%	**07	99%
Baschieri & Pellagri 103 Pistol 👍	<<locked>>	78%	17274	88%	**66	100%
Hodgdon Universal	<<locked>>	80%	17318	88%	**83	97%
Hodgdon CFE Pistol	<<locked>>	82%	17463	89%	**73	96%
Lovex S011	<<locked>>	65%	17143	88%	**10	97%
Lovex S020	<<locked>>	80%	17303	88%	**76	92%
Maxam CSB 1	<<locked>>	89%	17564	90%	**56	96%
Maxam CSB 2 👍	<<locked>>	91%	17027	87%	**19	100%
Maxam CSB 3	<<locked>>	80%	16853	86%	**37	99%
Maxam CSB 4	<<locked>>	76%	16839	86%	**27	100%
Maxam CSB 5	<<locked>>	71%	17187	88%	**04	100%
[Ramshot Silhouette]*	<<locked>>	71%	17550	90%	**79	87%
ReloadSwiss RS 12 👍	<<locked>>	80%	17260	88%	**19	100%
ReloadSwiss RS 20	<<locked>>	91%	17492	89%	**06	92%
Rottweil P 801	<<locked>>	72%	17434	89%	**83	100%
[SNPE Vectan A0]*	<<locked>>	85%	17114	87%	**27	88%
SNPE Vectan BA 9	<<locked>>	76%	17042	87%	**20	93%
SNPE Vectan BA10	<<locked>>	63%	17448	89%	**1	100%
SNPE Vectan BA9 1/2	<<locked>>	79%	17056	87%	**50	95%
[Somchem MP200]*	<<locked>>	79%	17129	87%	**66	87%
Somchem MS200	<<locked>>	82%	17318	88%	**53	90%
Vihtavuori N320 👍	<<locked>>	78%	17013	87%	**56	100%
Vihtavuori N330	<<locked>>	84%	17332	88%	**02	98%
[Vihtavuori N340]*	<<locked>>	84%	16737	85%	**50	89%
Winchester 231	<<locked>>	65%	17027	87%	**40	97%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	60%	11763	60%	**8	92%
ADI APS 450	<<locked>>	66%	16418	84%	**2	100%
ADI AS 30	<<locked>>	66%	13547	69%	**2	100%
ADI AS 50N	<<locked>>	64%	13213	68%	**8	98%
[Accurate No. 2]*	<<locked>>	69%	13909	71%	**5	81%
Accurate Solo 1000	<<locked>>	66%	14185	72%	**2	99%
Accurate Solo 1250	<<locked>>	73%	12647	65%	**8	91%
[Alliant BULLSEYE]*	<<locked>>	61%	12488	64%	**8	84%
[Alliant Sport Pistol]*	<<locked>>	61%	14098	72%	**4	85%
[Alliant UNIQUE]*	<<locked>>	71%	11081	57%	**2	81%
Baschieri & Pellagri 100	<<locked>>	70%	13518	69%	**5	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	88%	11414	58%	**8	97%
Baschieri & Pellagri 103 Pistol	<<locked>>	65%	11414	58%	**5	96%
Hodgdon Universal	<<locked>>	67%	11763	60%	**8	92%
Hodgdon CFE Pistol	<<locked>>	69%	12154	62%	**8	90%
Lovex S011	<<locked>>	60%	14692	75%	**1	95%
[Lovex S020]*	<<locked>>	68%	11589	59%	**8	85%
Maxam CSB 1	<<locked>>	76%	12575	64%	**5	91%
Maxam CSB 2	<<locked>>	74%	10095	52%	**5	95%
Maxam CSB 3	<<locked>>	69%	12430	63%	**5	96%
Maxam CSB 4	<<locked>>	66%	12908	66%	**2	98%
Maxam CSB 5	<<locked>>	63%	13460	69%	**8	100%
[Ramshot Silhouette]*	<<locked>>	62%	12589	64%	**8	80%
ReloadSwiss RS 12	<<locked>>	64%	10182	52%	**8	97%
[ReloadSwiss RS 20]*	<<locked>>	75%	11226	57%	**5	83%
Rottweil P 801	<<locked>>	61%	12024	61%	**1	100%
[SNPE Vectan A0]*	<<locked>>	75%	13227	68%	**5	84%
[SNPE Vectan BA 9]*	<<locked>>	66%	13053	67%	**2	89%
SNPE Vectan BA10	<<locked>>	61%	16404	84%	**2	100%
SNPE Vectan BA9 1/2	<<locked>>	68%	12299	63%	**8	90%
[Somchem MP200]*	<<locked>>	67%	12082	62%	**5	81%
[Somchem MS200]*	<<locked>>	70%	12575	64%	**2	85%
Vihtavuori N320	<<locked>>	66%	11458	59%	**5	98%
Vihtavuori N330	<<locked>>	69%	10994	56%	**8	91%
[Vihtavuori N340]*	<<locked>>	73%	11980	61%	**8	83%
Winchester 231	<<locked>>	62%	15374	79%	**04	96%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data