Load data for 9 mm Browning Court (.380 ACP) + .355 | 90gr | Lehigh Defense Xtreme Defense

Recommended Powder(s): ADI AS 30, Maxam CSB 5, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| Lehigh Defense Xtreme Defense
Manufacturer SKU:	09355090SP
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.580" \| 14.7mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.292" \| 7.4mm
Shank Seated Depth:	0.292" \| 7.4mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B11027_C1213
Last updated:	2025-11-05

Load data for 68 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 90gr | Lehigh Defense Xtreme Defense bullet and 34 powders such as ADI AS 30, Maxam CSB 5, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	94%	17347	89%	**40	90%
ADI APS 350	<<locked>>	79%	16737	85%	**9	100%
ADI APS 450	<<locked>>	82%	16926	86%	**9	100%
ADI AS 30 👍	<<locked>>	96%	17172	88%	**8	99%
ADI AS 50N	<<locked>>	94%	16984	87%	**1	95%
Accurate Solo 1000	<<locked>>	90%	16737	86%	**5	95%
[Accurate Solo 1250]*	<<locked>>	94%	12995	66%	**2	83%
Baschieri & Pellagri 100	<<locked>>	94%	15360	78%	**2	91%
Hodgdon Clays	<<locked>>	79%	16621	85%	**9	100%
Hodgdon HP38	<<locked>>	74%	17593	90%	**1	91%
Hodgdon TiteGroup	<<locked>>	65%	16752	86%	**5	97%
[Hodgdon Universal]*	<<locked>>	96%	14344	73%	**4	87%
[Hodgdon CFE Pistol]*	<<locked>>	96%	14301	73%	**5	84%
[Lovex D032]*	<<locked>>	63%	16810	86%	**5	84%
Lovex S011	<<locked>>	81%	17448	89%	**5	90%
[Maxam CSB 1]*	<<locked>>	95%	11980	61%	**6	82%
[Maxam CSB 2]*	<<locked>>	96%	9500	49%	**3	85%
Maxam CSB 3	<<locked>>	95%	14446	74%	**5	91%
Maxam CSB 4	<<locked>>	97%	16940	87%	**1	96%
Maxam CSB 5 👍	<<locked>>	91%	17158	88%	**4	100%
[Ramshot Zip]*	<<locked>>	73%	16621	85%	**4	89%
ReloadSwiss RS 12	<<locked>>	95%	12270	63%	**1	95%
Rottweil P 801 👍	<<locked>>	95%	17071	87%	**70	100%
[SNPE Vectan BA 9]*	<<locked>>	94%	17216	88%	**1	84%
SNPE Vectan BA10	<<locked>>	76%	16911	86%	**9	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	95%	14953	76%	**8	85%
[Shooters World Clean Shot]*	<<locked>>	63%	16810	86%	**5	84%
[Shooters World Ultimate Pistol]*	<<locked>>	68%	17463	89%	**14	82%
[Somchem S121]*	<<locked>>	67%	16621	85%	**30	86%
Vihtavuori N310	<<locked>>	79%	16911	86%	**8	100%
Vihtavuori N320	<<locked>>	96%	15214	78%	**4	95%
Vihtavuori N32C Tin Star	<<locked>>	96%	6672	34%	**8	91%
[Vihtavuori N330]*	<<locked>>	94%	13082	67%	**5	84%
[Winchester 231]*	<<locked>>	81%	16621	85%	**4	89%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	75%	10037	51%	**3	80%
ADI APS 350	<<locked>>	64%	11545	59%	**4	100%
[ADI APS 450]²	<<locked>>	59%	9108	47%	**5	97%
[ADI AS 30]*	<<locked>>	60%	6759	34%	**2	87%
[ADI AS 50N]*	<<locked>>	62%	7353	38%	**9	81%
[Accurate Solo 1000]*	<<locked>>	62%	8166	42%	**9	83%
[Accurate Solo 1250]*	<<locked>>	92%	12053	62%	**6	81%
[Baschieri & Pellagri 100]*	<<locked>>	72%	8267	42%	**5	80%
Hodgdon Clays	<<locked>>	64%	11414	58%	**1	100%
[Hodgdon HP38]*	<<locked>>	61%	11574	59%	**0	84%
Hodgdon TiteGroup	<<locked>>	63%	15534	79%	**2	96%
[Hodgdon Universal]*	<<locked>>	83%	10037	51%	**3	80%
[Hodgdon CFE Pistol]*	<<locked>>	89%	11545	59%	**9	81%
[Lovex D032]*	<<locked>>	61%	15490	79%	**9	83%
[Lovex S011]*	<<locked>>	63%	10341	53%	**8	80%
[Maxam CSB 1]*	<<locked>>	92%	11124	57%	**3	80%
[Maxam CSB 2]*	<<locked>>	90%	8282	42%	**0	81%
[Maxam CSB 3]*	<<locked>>	74%	8601	44%	**1	81%
[Maxam CSB 4]*	<<locked>>	64%	7165	37%	**5	81%
Maxam CSB 5	<<locked>>	63%	8050	41%	**5	93%
[Ramshot Zip]*	<<locked>>	61%	11008	56%	**7	82%
[ReloadSwiss RS 12]*	<<locked>>	72%	6512	33%	**1	81%
[Rottweil P 801]*²	<<locked>>	59%	5540	28%	**2	82%
[SNPE Vectan BA 9]*	<<locked>>	86%	14199	73%	**6	81%
SNPE Vectan BA10	<<locked>>	61%	10965	56%	**1	99%
[SNPE Vectan BA9 1/2]*	<<locked>>	85%	11502	59%	**6	80%
[Shooters World Clean Shot]*	<<locked>>	61%	15490	79%	**9	83%
[Shooters World Ultimate Pistol]*	<<locked>>	64%	15563	80%	**1	80%
[Somchem S121]*	<<locked>>	62%	13793	70%	**5	83%
[Vihtavuori N310]²	<<locked>>	59%	8775	45%	**4	99%
[Vihtavuori N320]*	<<locked>>	67%	6933	35%	**5	80%
[Vihtavuori N32C Tin Star]*	<<locked>>	86%	5424	28%	**9	86%
[Vihtavuori N330]*	<<locked>>	89%	11473	59%	**6	81%
[Winchester 231]*	<<locked>>	66%	10254	52%	**0	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data