Load data for 9 mm Browning Court (.380 ACP) + .355 | 80gr | Peregrine SD 9mm Short

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Peregrine SD 9mm Short
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.520" \| 13.2mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.232" \| 5.9mm
Shank Seated Depth:	0.181" \| 4.6mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B8176_C1213
Last updated:	2026-01-21
Recommended Twist Rate:	1:28 - 1:23

Load data for 68 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 80gr | Peregrine SD 9mm Short bullet and 34 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	90%	17492	89%	**04	92%
ADI APS 350	<<locked>>	76%	17056	87%	**20	100%
ADI APS 450	<<locked>>	80%	17274	88%	**56	100%
ADI AS 30	<<locked>>	93%	17492	89%	**32	100%
ADI AS 50N	<<locked>>	90%	16592	85%	**35	96%
Accurate Solo 1000	<<locked>>	87%	17260	88%	**02	97%
[Accurate Solo 1250]*	<<locked>>	96%	14837	76%	**83	87%
[Alliant BULLSEYE]*	<<locked>>	87%	17419	89%	**55	83%
Baschieri & Pellagri 100	<<locked>>	94%	16781	86%	**12	94%
Baschieri & Pellagri 103 Pistol	<<locked>>	93%	17027	87%	**68	96%
Hodgdon Clays	<<locked>>	76%	16926	86%	**33	100%
Hodgdon HP38	<<locked>>	70%	17332	89%	**38	92%
Hodgdon TiteGroup	<<locked>>	62%	16723	85%	**09	98%
Hodgdon Universal	<<locked>>	95%	15780	81%	**55	90%
[Hodgdon CFE Pistol]*	<<locked>>	96%	15737	80%	**29	88%
Lovex S011	<<locked>>	77%	17129	87%	**99	91%
[Lovex S020]*	<<locked>>	96%	16766	86%	**52	84%
[Maxam CSB 1]*	<<locked>>	97%	13721	70%	**53	86%
[Maxam CSB 2]*	<<locked>>	96%	10791	55%	**56	89%
Maxam CSB 3	<<locked>>	95%	16114	82%	**22	94%
Maxam CSB 4	<<locked>>	92%	16882	86%	**38	97%
Maxam CSB 5	<<locked>>	86%	17027	87%	**29	100%
Ramshot Zip	<<locked>>	71%	17318	88%	**42	91%
ReloadSwiss RS 12	<<locked>>	95%	14605	75%	**01	97%
Rottweil P 801	<<locked>>	89%	16752	86%	**14	100%
[SNPE Vectan BA 9]*	<<locked>>	90%	17187	88%	**02	86%
SNPE Vectan BA10	<<locked>>	75%	17260	88%	**56	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	97%	17347	89%	**55	89%
[Shooters World Ultimate Pistol]*	<<locked>>	65%	17579	90%	**75	84%
[Somchem S121]*	<<locked>>	65%	17202	88%	**01	88%
Vihtavuori N310	<<locked>>	76%	17260	88%	**25	100%
Vihtavuori N320	<<locked>>	96%	16723	85%	**71	98%
[Vihtavuori N330]*	<<locked>>	96%	15127	77%	**38	89%
Winchester 231	<<locked>>	79%	17318	88%	**42	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	70%	9427	48%	**8	81%
ADI APS 350	<<locked>>	65%	12705	65%	**2	100%
ADI APS 450	<<locked>>	65%	11574	59%	**9	100%
ADI AS 30	<<locked>>	73%	10327	53%	**2	95%
[ADI AS 50N]*	<<locked>>	69%	9471	48%	**2	87%
Accurate Solo 1000	<<locked>>	71%	11153	57%	**5	90%
[Accurate Solo 1250]*	<<locked>>	83%	10486	54%	**1	80%
[Alliant BULLSEYE]*	<<locked>>	83%	15766	81%	**12	81%
[Baschieri & Pellagri 100]*	<<locked>>	76%	10327	53%	**2	86%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	73%	9297	47%	**5	86%
Hodgdon Clays	<<locked>>	65%	12589	64%	**2	100%
[Hodgdon HP38]*	<<locked>>	62%	13184	67%	**30	88%
Hodgdon TiteGroup	<<locked>>	61%	15795	81%	**86	97%
[Hodgdon Universal]*	<<locked>>	77%	9427	48%	**8	81%
[Hodgdon CFE Pistol]*	<<locked>>	83%	10907	56%	**8	81%
[Lovex S011]*	<<locked>>	63%	11197	57%	**2	83%
[Lovex S020]*	<<locked>>	90%	14127	72%	**86	81%
[Maxam CSB 1]*	<<locked>>	86%	10327	53%	**5	80%
[Maxam CSB 2]*	<<locked>>	86%	8021	41%	**8	82%
[Maxam CSB 3]*	<<locked>>	77%	9979	51%	**8	86%
[Maxam CSB 4]*	<<locked>>	71%	9631	49%	**5	89%
Maxam CSB 5	<<locked>>	67%	9776	50%	**2	97%
[Ramshot Zip]*	<<locked>>	62%	12531	64%	**14	86%
[ReloadSwiss RS 12]*	<<locked>>	74%	7513	38%	**8	86%
Rottweil P 801	<<locked>>	67%	7832	40%	**8	91%
[SNPE Vectan BA 9]*	<<locked>>	79%	12705	65%	**1	80%
SNPE Vectan BA10	<<locked>>	61%	11545	59%	**9	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	79%	10573	54%	**8	80%
[Shooters World Ultimate Pistol]*	<<locked>>	61%	15011	77%	**09	81%
[Somchem S121]*	<<locked>>	60%	14011	72%	**12	85%
Vihtavuori N310	<<locked>>	63%	11023	56%	**1	100%
[Vihtavuori N320]*	<<locked>>	73%	8847	45%	**5	87%
[Vihtavuori N330]*	<<locked>>	82%	10240	52%	**4	80%
[Winchester 231]*	<<locked>>	62%	9863	50%	**5	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data