Load data for 9 mm Browning Court (.380 ACP) + .355 | 80gr | Barnes TAC-XP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 80gr \| Barnes TAC-XP
Manufacturer SKU:	30440
Bullet Weight:	80gr \| 5.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.512" \| 13.0mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.224" \| 5.7mm
Shank Seated Depth:	0.224" \| 5.7mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B696_C1213
Last updated:	2026-01-22

Load data for 68 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 80gr | Barnes TAC-XP bullet and 34 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	80%	17071	87%	**58	91%
ADI APS 350	<<locked>>	72%	17143	88%	**04	100%
ADI APS 450	<<locked>>	73%	16375	84%	**20	100%
ADI AS 30	<<locked>>	84%	17056	87%	**89	100%
ADI AS 50N	<<locked>>	83%	17434	89%	**22	96%
Accurate Solo 1000	<<locked>>	80%	16839	86%	**76	96%
[Accurate Solo 1250]*	<<locked>>	96%	17318	88%	**32	89%
[Alliant BULLSEYE]*	<<locked>>	80%	17245	88%	**32	82%
Baschieri & Pellagri 100	<<locked>>	87%	17042	87%	**89	94%
Baschieri & Pellagri 102 Pistol	<<locked>>	95%	10907	56%	**1	90%
Baschieri & Pellagri 103 Pistol	<<locked>>	88%	17260	88%	**55	96%
Hodgdon Clays	<<locked>>	72%	17274	88%	**20	100%
Hodgdon HP38	<<locked>>	65%	17245	88%	**19	92%
Hodgdon Universal	<<locked>>	89%	17071	87%	**58	91%
[Hodgdon CFE Pistol]*	<<locked>>	92%	16897	86%	**38	89%
Lovex S011	<<locked>>	73%	17521	89%	**89	91%
[Lovex S020]*	<<locked>>	89%	16853	86%	**35	84%
[Maxam CSB 1]*	<<locked>>	96%	16099	82%	**99	88%
Maxam CSB 2	<<locked>>	96%	13518	69%	**22	93%
Maxam CSB 3	<<locked>>	90%	16810	86%	**19	94%
Maxam CSB 4	<<locked>>	85%	16810	86%	**15	97%
Maxam CSB 5	<<locked>>	79%	16578	85%	**96	100%
Ramshot Zip	<<locked>>	66%	17303	88%	**22	91%
ReloadSwiss RS 12 👍	<<locked>>	93%	17332	89%	**37	99%
Rottweil P 801	<<locked>>	82%	16723	85%	**84	100%
[SNPE Vectan BA 9]*	<<locked>>	84%	17056	87%	**83	86%
SNPE Vectan BA10	<<locked>>	68%	16360	84%	**20	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	90%	17448	89%	**35	89%
[Somchem MS200]*	<<locked>>	91%	17245	88%	**22	83%
Vihtavuori N310	<<locked>>	70%	16926	86%	**96	100%
Vihtavuori N320	<<locked>>	89%	16752	86%	**52	97%
Vihtavuori N32C Tin Star	<<locked>>	97%	9805	50%	**2	98%
Vihtavuori N330	<<locked>>	95%	17535	90%	**81	91%
Winchester 231	<<locked>>	74%	17303	88%	**22	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	61%	9819	50%	**5	80%
ADI APS 350	<<locked>>	64%	14040	72%	**5	100%
ADI APS 450	<<locked>>	63%	12952	66%	**5	100%
ADI AS 30	<<locked>>	66%	11284	58%	**8	96%
ADI AS 50N	<<locked>>	65%	11327	58%	**2	90%
Accurate Solo 1000	<<locked>>	66%	11966	61%	**5	91%
[Accurate Solo 1250]*	<<locked>>	76%	11095	57%	**2	81%
[Alliant BULLSEYE]*	<<locked>>	77%	15490	79%	**86	80%
[Baschieri & Pellagri 100]*	<<locked>>	72%	11560	59%	**8	88%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	91%	9993	51%	**2	88%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	67%	9790	50%	**5	86%
Hodgdon Clays	<<locked>>	61%	13227	68%	**5	100%
Hodgdon HP38	<<locked>>	61%	15026	77%	**60	90%
[Hodgdon Universal]*	<<locked>>	67%	9819	50%	**5	80%
[Hodgdon CFE Pistol]*	<<locked>>	75%	11197	57%	**8	81%
[Lovex S011]*	<<locked>>	60%	12024	61%	**8	85%
[Lovex S020]*	<<locked>>	82%	13793	70%	**53	80%
[Maxam CSB 1]*	<<locked>>	79%	10979	56%	**8	81%
[Maxam CSB 2]*	<<locked>>	77%	8746	45%	**8	83%
[Maxam CSB 3]*	<<locked>>	71%	10486	54%	**5	86%
Maxam CSB 4	<<locked>>	67%	10776	55%	**5	90%
Maxam CSB 5	<<locked>>	63%	10776	55%	**5	98%
[Ramshot Zip]*	<<locked>>	60%	14344	73%	**43	88%
[ReloadSwiss RS 12]*	<<locked>>	66%	8528	44%	**2	88%
Rottweil P 801	<<locked>>	62%	9224	47%	**1	93%
[SNPE Vectan BA 9]*	<<locked>>	73%	12937	66%	**8	80%
[SNPE Vectan BA10]²	<<locked>>	59%	12937	66%	**5	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	73%	11269	58%	**1	81%
[Somchem MS200]*	<<locked>>	87%	15693	80%	**76	81%
Vihtavuori N310	<<locked>>	61%	12850	66%	**04	100%
[Vihtavuori N320]*	<<locked>>	69%	10066	51%	**8	89%
Vihtavuori N32C Tin Star	<<locked>>	94%	9384	48%	**2	97%
[Vihtavuori N330]*	<<locked>>	76%	10776	55%	**8	81%
[Winchester 231]*	<<locked>>	60%	11777	60%	**8	84%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data