Load data for 9 mm Browning Court (.380 ACP) + .355 | 75gr | CutEdge HGHP

Recommended Powder(s): Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 75gr \| CutEdge HGHP
Manufacturer SKU:	HGHP 380 75
Bullet Weight:	75gr \| 4.9g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.440" \| 11.2mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.152" \| 3.9mm
Shank Seated Depth:	0.152" \| 3.9mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B8532_C1213
Last updated:	2025-01-01

Load data for 0 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 75gr | CutEdge HGHP bullet and 0 powders such as Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	71%	17158	88%	**50	92%
ADI APS 350	<<locked>>	65%	16911	86%	**86	100%
ADI APS 450	<<locked>>	69%	17289	88%	**32	100%
ADI AS 30	<<locked>>	75%	17550	90%	**88	100%
ADI AS 50N	<<locked>>	74%	17448	89%	**11	97%
Accurate Solo 1000	<<locked>>	74%	17260	88%	**81	98%
Accurate Solo 1250	<<locked>>	87%	17593	90%	**37	91%
[Alliant BULLSEYE]*	<<locked>>	74%	17332	89%	**40	84%
[Alliant Sport Pistol]*	<<locked>>	69%	17274	88%	**34	83%
[Alliant UNIQUE]*	<<locked>>	88%	17158	88%	**60	83%
Baschieri & Pellagri 100	<<locked>>	80%	17419	89%	**98	96%
Baschieri & Pellagri 102 Pistol	<<locked>>	97%	14243	73%	**68	96%
Baschieri & Pellagri 103 Pistol	<<locked>>	79%	17448	89%	**53	97%
Hodgdon Clays	<<locked>>	65%	16984	87%	**96	100%
Hodgdon Universal	<<locked>>	79%	17158	88%	**50	92%
Hodgdon CFE Pistol	<<locked>>	82%	16824	86%	**27	90%
Lovex S011	<<locked>>	66%	17390	89%	**88	93%
[Lovex S020]*	<<locked>>	82%	17274	88%	**50	86%
Maxam CSB 1	<<locked>>	91%	17564	90%	**34	91%
Maxam CSB 2	<<locked>>	95%	17332	89%	**29	98%
Maxam CSB 3	<<locked>>	83%	17419	89%	**30	96%
Maxam CSB 4	<<locked>>	78%	17129	87%	**14	98%
Maxam CSB 5	<<locked>>	73%	17347	89%	**07	100%
ReloadSwiss RS 12	<<locked>>	82%	17506	89%	**25	99%
[ReloadSwiss RS 20]*	<<locked>>	92%	17172	88%	**60	85%
Rottweil P 801 👍	<<locked>>	71%	16810	86%	**60	100%
[SNPE Vectan A0]*	<<locked>>	87%	17347	89%	**94	82%
[SNPE Vectan BA 9]*	<<locked>>	78%	17332	89%	**94	88%
SNPE Vectan BA10	<<locked>>	64%	17274	88%	**32	100%
SNPE Vectan BA9 1/2	<<locked>>	80%	17042	87%	**20	90%
[Somchem MS200]*	<<locked>>	82%	17303	88%	**17	84%
Vihtavuori N310	<<locked>>	63%	17564	90%	**91	100%
Vihtavuori N320	<<locked>>	82%	17419	89%	**63	98%
Vihtavuori N32C Tin Star	<<locked>>	96%	12937	66%	**09	100%
Vihtavuori N330	<<locked>>	86%	17202	88%	**80	93%
[Vihtavuori N340]*	<<locked>>	87%	17448	89%	**40	84%
Winchester 231	<<locked>>	67%	17419	89%	**27	93%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	62%	13024	67%	**15	87%
ADI APS 350	<<locked>>	63%	16085	82%	**66	100%
ADI APS 450	<<locked>>	61%	14446	74%	**56	100%
ADI AS 30	<<locked>>	62%	12807	65%	**43	98%
ADI AS 50N	<<locked>>	62%	12981	66%	**70	93%
Accurate Solo 1000	<<locked>>	61%	12531	64%	**37	93%
[Accurate Solo 1250]*	<<locked>>	65%	10370	53%	**1	81%
[Alliant BULLSEYE]*	<<locked>>	66%	14489	74%	**48	81%
[Alliant Sport Pistol]*	<<locked>>	65%	15548	79%	**84	81%
[Alliant UNIQUE]*	<<locked>>	82%	14852	76%	**88	80%
[Baschieri & Pellagri 100]*	<<locked>>	60%	10515	54%	**1	87%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	61%	6715	34%	**3	81%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	62%	10660	54%	**30	89%
Hodgdon Clays	<<locked>>	63%	15954	81%	**76	100%
[Hodgdon Universal]*	<<locked>>	62%	11414	58%	**47	84%
[Hodgdon CFE Pistol]*	<<locked>>	62%	10312	53%	**4	80%
Lovex S011	<<locked>>	62%	15214	78%	**29	91%
[Lovex S020]*	<<locked>>	70%	12633	65%	**99	80%
[Maxam CSB 1]*	<<locked>>	66%	9921	51%	**5	80%
[Maxam CSB 2]*	<<locked>>	62%	8224	42%	**5	83%
[Maxam CSB 3]*	<<locked>>	62%	10733	55%	**04	88%
Maxam CSB 4	<<locked>>	60%	11008	56%	**10	92%
Maxam CSB 5	<<locked>>	62%	13198	67%	**86	100%
ReloadSwiss RS 12	<<locked>>	60%	9413	48%	**43	91%
[ReloadSwiss RS 20]*	<<locked>>	85%	14547	74%	**71	81%
Rottweil P 801	<<locked>>	60%	11995	61%	**12	97%
[SNPE Vectan A0]*	<<locked>>	82%	15548	79%	**42	80%
[SNPE Vectan BA 9]*	<<locked>>	62%	11647	59%	**07	80%
SNPE Vectan BA10	<<locked>>	61%	15983	82%	**93	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	62%	10733	55%	**01	81%
[Somchem MS200]*	<<locked>>	73%	13909	71%	**12	80%
Vihtavuori N310	<<locked>>	62%	16752	86%	**71	100%
Vihtavuori N320	<<locked>>	61%	10312	53%	**20	91%
Vihtavuori N32C Tin Star	<<locked>>	62%	6556	34%	**3	92%
[Vihtavuori N330]*	<<locked>>	63%	9747	50%	**1	81%
[Vihtavuori N340]*	<<locked>>	81%	15316	78%	**75	81%
Winchester 231	<<locked>>	61%	14446	74%	**35	90%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data