Load data for 9 mm Browning Court (.380 ACP) + .355 | 140gr | Sellier & Bellot FMJ

Recommended Powder(s): ReloadSwiss RS 12, Vihtavuori N320

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 140gr \| Sellier & Bellot FMJ
Manufacturer SKU:	31932
Bullet Weight:	140gr \| 9.1g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.614" \| 15.6mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.326" \| 8.3mm
Shank Seated Depth:	0.326" \| 8.3mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7251_C1213
Last updated:	2025-01-01

Load data for 42 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 140gr | Sellier & Bellot FMJ bullet and 21 powders such as ReloadSwiss RS 12, Vihtavuori N320. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	76%	15548	79%	**5	94%
ADI AS 50N	<<locked>>	78%	16476	84%	**2	98%
Accurate Solo 1250	<<locked>>	90%	15853	81%	**9	92%
[Alliant BULLSEYE]*	<<locked>>	75%	15708	80%	**9	86%
[Alliant UNIQUE]*	<<locked>>	96%	17129	87%	**1	87%
Hodgdon Universal	<<locked>>	84%	15548	79%	**5	94%
Lovex S020	<<locked>>	89%	17564	90%	**1	90%
Maxam CSB 2	<<locked>>	95%	13822	71%	**8	97%
Maxam CSB 3	<<locked>>	86%	16259	83%	**9	97%
Ramshot Zip	<<locked>>	64%	16694	85%	**5	95%
ReloadSwiss RS 12 👍	<<locked>>	87%	15592	80%	**1	100%
[ReloadSwiss RS 20]*	<<locked>>	93%	14692	75%	**9	85%
Rottweil P 801	<<locked>>	77%	15853	81%	**1	100%
SNPE Vectan BA 9	<<locked>>	84%	17564	90%	**9	91%
SNPE Vectan BA9 1/2	<<locked>>	83%	15461	79%	**2	92%
[Somchem MP200]*	<<locked>>	84%	16201	83%	**2	83%
[Somchem MS200]*	<<locked>>	89%	16984	87%	**2	87%
Vihtavuori N320 👍	<<locked>>	85%	15838	81%	**5	99%
Vihtavuori N330	<<locked>>	89%	15737	80%	**8	94%
[Vihtavuori N340]*	<<locked>>	94%	17027	87%	**5	87%
Winchester 231	<<locked>>	71%	16694	85%	**5	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	70%	13416	69%	**2	91%
ADI AS 50N	<<locked>>	71%	13924	71%	**9	97%
Accurate Solo 1250	<<locked>>	83%	13518	69%	**6	90%
[Alliant BULLSEYE]*	<<locked>>	69%	13227	68%	**9	82%
[Alliant UNIQUE]*	<<locked>>	84%	12894	66%	**6	81%
Hodgdon Universal	<<locked>>	77%	13416	69%	**2	91%
[Lovex S020]*	<<locked>>	77%	12763	65%	**6	84%
Maxam CSB 2	<<locked>>	88%	11879	61%	**9	96%
Maxam CSB 3	<<locked>>	79%	13489	69%	**3	95%
[Ramshot Zip]²	<<locked>>	59%	14330	73%	**3	92%
ReloadSwiss RS 12	<<locked>>	74%	11095	57%	**6	97%
[ReloadSwiss RS 20]*	<<locked>>	86%	12763	65%	**9	82%
Rottweil P 801	<<locked>>	65%	11052	56%	**9	99%
[SNPE Vectan BA 9]*	<<locked>>	78%	15084	77%	**9	88%
[SNPE Vectan BA9 1/2]*	<<locked>>	77%	13140	67%	**9	89%
[Somchem MP200]*	<<locked>>	79%	14185	72%	**2	81%
[Somchem MS200]*	<<locked>>	82%	14678	75%	**9	85%
Vihtavuori N320	<<locked>>	78%	13285	68%	**2	98%
Vihtavuori N330	<<locked>>	83%	13329	68%	**2	92%
[Vihtavuori N340]*	<<locked>>	87%	14866	76%	**6	84%
Winchester 231	<<locked>>	66%	14330	73%	**3	92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data