Load data for 9 mm Browning Court (.380 ACP) + .355 | 130gr | Speer TMJ

Recommended Powder(s): ReloadSwiss RS 12, Rottweil P 801

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 130gr \| Speer TMJ
Manufacturer SKU:	4010
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.622" \| 15.8mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.334" \| 8.5mm
Shank Seated Depth:	0.334" \| 8.5mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6210_C1213
Last updated:	2025-01-01

Load data for 44 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 130gr | Speer TMJ bullet and 22 powders such as ReloadSwiss RS 12, Rottweil P 801. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	80%	15418	79%	**5	92%
ADI AS 30	<<locked>>	84%	16476	84%	**9	100%
ADI AS 50N	<<locked>>	82%	16375	84%	**2	97%
Accurate Solo 1250	<<locked>>	95%	16070	82%	**8	90%
[Alliant BULLSEYE]*	<<locked>>	79%	15621	80%	**5	83%
Baschieri & Pellagri 100	<<locked>>	87%	16012	82%	**9	95%
Hodgdon Universal	<<locked>>	88%	15418	79%	**5	92%
[Lovex S020]*	<<locked>>	88%	14939	76%	**5	85%
Maxam CSB 1	<<locked>>	96%	15156	77%	**9	90%
Maxam CSB 2	<<locked>>	93%	11676	60%	**2	93%
Maxam CSB 3	<<locked>>	91%	16056	82%	**8	96%
Maxam CSB 4	<<locked>>	85%	15766	81%	**9	98%
Maxam CSB 5	<<locked>>	80%	16099	82%	**5	100%
Ramshot Zip	<<locked>>	67%	16897	86%	**5	93%
ReloadSwiss RS 12 👍	<<locked>>	91%	15345	78%	**4	99%
Rottweil P 801 👍	<<locked>>	81%	15389	79%	**4	100%
[SNPE Vectan BA 9]*	<<locked>>	88%	17550	90%	**8	89%
SNPE Vectan BA9 1/2	<<locked>>	88%	15418	79%	**2	90%
[Somchem MS200]*	<<locked>>	93%	17071	87%	**1	85%
Vihtavuori N320	<<locked>>	89%	15664	80%	**5	98%
Vihtavuori N330	<<locked>>	94%	15751	80%	**5	92%
Winchester 231	<<locked>>	75%	16897	86%	**5	93%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	73%	13126	67%	**9	89%
ADI AS 30	<<locked>>	76%	13648	70%	**3	99%
ADI AS 50N	<<locked>>	75%	13706	70%	**6	95%
[Accurate Solo 1250]*	<<locked>>	87%	13518	69%	**2	88%
[Alliant BULLSEYE]*	<<locked>>	72%	13416	68%	**9	80%
Baschieri & Pellagri 100	<<locked>>	80%	13329	68%	**3	93%
[Hodgdon Universal]*	<<locked>>	81%	13126	67%	**9	89%
[Lovex S020]*	<<locked>>	81%	12676	65%	**9	82%
[Maxam CSB 1]*	<<locked>>	88%	12734	65%	**6	87%
Maxam CSB 2	<<locked>>	86%	10037	51%	**6	90%
Maxam CSB 3	<<locked>>	83%	13605	69%	**2	93%
Maxam CSB 4	<<locked>>	77%	12836	66%	**9	96%
Maxam CSB 5	<<locked>>	72%	13198	67%	**6	100%
Ramshot Zip	<<locked>>	62%	14286	73%	**2	90%
ReloadSwiss RS 12	<<locked>>	78%	10921	56%	**2	96%
Rottweil P 801	<<locked>>	68%	10631	54%	**3	98%
[SNPE Vectan BA 9]*	<<locked>>	82%	15055	77%	**6	86%
[SNPE Vectan BA9 1/2]*	<<locked>>	81%	13169	67%	**6	87%
[Somchem MS200]*	<<locked>>	87%	14576	74%	**6	82%
Vihtavuori N320	<<locked>>	82%	13213	67%	**9	96%
[Vihtavuori N330]*	<<locked>>	80%	11327	58%	**9	86%
Winchester 231	<<locked>>	69%	14286	73%	**2	90%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data