Load data for 8.6 mm Blackout + .338 | 165gr | Impala LWHV LS

8.6 mm Blackout cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:165 gr
Bullet Diameter:0.338"
Bullet Length:<<locked>>
Case Length (l3):1.685"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:50 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:16"
Max. allowed Pressure:61,999 psi
Recommended Twist Rate:1:13.0

Load data in caliber 8.6 mm Blackout with .338 | 165gr | Impala LWHV LS bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%53,969 psi87%2392 fps98.6%
Accurate LT-30<<locked>>98%53,505 psi86%2375 fps96.2%
ADI APS 450<<locked>>82%56,028 psi90%1821 fps100%
ADI AR 2205<<locked>>84%53,374 psi86%2297 fps100%
ADI AR 2207<<locked>>98%55,448 psi89%2480 fps100%
ADI AR 2219ᴾ<<locked>>100%53,867 psi87%2493 fps95.8%
Alliant AR-Compᴾ<<locked>>100%39,813 psi64%2310 fps97%
Alliant Reloder-10xᴾ<<locked>>100%49,008 psi79%2418 fps98%
Alliant Reloder-7<<locked>>96%55,027 psi89%2444 fps99.2%
Baschieri & Pellagri 106ᴾ<<locked>>100%54,708 psi88%2411 fps96.6%
Hodgdon H4198<<locked>>96%55,927 psi90%2425 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%31,749 psi51%1453 fps100%
IMR 4198ᴾ<<locked>>100%51,111 psi82%2408 fps99.1%
IMR 4227<<locked>>90%53,330 psi86%2382 fps99.9%
Lovex D060<<locked>>84%53,505 psi86%2405 fps99.2%
Lovex S053<<locked>>92%54,447 psi88%2379 fps100%
Norma 200<<locked>>98%53,069 psi86%2461 fps99.1%
ReloadSwiss RS 14ᴾ<<locked>>100%31,386 psi51%1483 fps100%
ReloadSwiss RS 36<<locked>>92%55,506 psi90%2444 fps99.9%
Shooters World Buffalo Rifle<<locked>>84%53,505 psi86%2405 fps99.2%
Shooters World SOCOM<<locked>>84%54,244 psi87%2385 fps99.6%
SNPE Vectan BA6 1/2<<locked>>96%55,274 psi89%2264 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%50,038 psi81%2418 fps96.2%
Vihtavuori N110<<locked>>86%54,592 psi88%2313 fps100%
Vihtavuori N120<<locked>>98%55,477 psi89%2444 fps100%
Vihtavuori N130ᴾ<<locked>>100%47,442 psi77%2339 fps97.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,275 psi60%2123 fps95%
Accurate LT-30<<locked>>96%50,763 psi82%2336 fps95.6%
ADI APS 450<<locked>>80%54,128 psi87%1798 fps100%
ADI AR 2205<<locked>>80%47,630 psi77%2218 fps100%
ADI AR 220729.2 gr80%32,996 psi53%2110 fps97.8%
ADI AR 2219<<locked>>98%50,647 psi82%2444 fps95%
Alliant AR-Comp<<locked>>96%35,549 psi57%2221 fps95.4%
Alliant Reloder-10x<<locked>>90%36,927 psi60%2208 fps95%
Alliant Reloder-731 gr82%37,014 psi60%2152 fps95.7%
Baschieri & Pellagri 106<<locked>>96%48,341 psi78%2323 fps95.3%
Hodgdon H4198<<locked>>94%52,576 psi85%2375 fps95.4%
Hodgdon TrailBoss<<locked>>80%23,424 psi38%1293 fps100%
IMR 4198<<locked>>86%35,346 psi57%2129 fps95.5%
IMR 4227<<locked>>80%40,089 psi65%2172 fps98.4%
Lovex D060<<locked>>80%47,688 psi77%2316 fps98.5%
Lovex S053<<locked>>80%39,479 psi64%2156 fps99.9%
Norma 20032.1 gr84%35,708 psi58%2165 fps95.5%
ReloadSwiss RS 14<<locked>>80%23,308 psi38%1322 fps100%
ReloadSwiss RS 36<<locked>>80%39,392 psi64%2195 fps98.1%
Shooters World Buffalo Rifle<<locked>>80%47,688 psi77%2316 fps98.5%
Shooters World SOCOM<<locked>>80%47,892 psi77%2297 fps99%
SNPE Vectan BA6 1/2<<locked>>80%37,043 psi60%2014 fps100%
SNPE Vectan SP 3<<locked>>98%47,413 psi76%2375 fps95.6%
Vihtavuori N110<<locked>>80%46,079 psi74%2201 fps100%
Vihtavuori N120<<locked>>80%33,214 psi54%2093 fps98.8%
Vihtavuori N130<<locked>>92%38,145 psi62%2178 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 8.6 mm Blackout loaded with the .338 | 165gr | Impala LWHV LS. ADI AR 2219 delivers the highest muzzle velocity at 2,493 fps; across all powders the maximum-charge window runs from 1,453 fps to 2,493 fps. ADI AR 2219 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (427 MPa), the top charges use 51–90 %, leaving at least 10 % headroom. The 165.0 gr projectile in 0.338" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. ADI AR 2219, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, Norma 200 rank at the top here: for 8.6 mm Blackout with the .338 | 165gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data