
Load Specifications
Load data in caliber 8 x 57 R 360 with .321 | 180gr | Frontier PH HPFB bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 2495, Vihtavuori N135 and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 84% | 31,995 psi | 90% | 2103 fps | 98.2% |
| Accurate 2495 | <<locked>> | 92% | 30,922 psi | 87% | 2156 fps | 98.4% |
| Accurate 4064 | <<locked>> | 94% | 30,937 psi | 87% | 2169 fps | 95.8% |
| Alliant AR-Comp | <<locked>> | 86% | 31,386 psi | 88% | 2162 fps | 99.8% |
| Hodgdon TrailBoss | <<locked>> | 98% | 31,430 psi | 88% | 1407 fps | 100% |
| IMR 3031 | <<locked>> | 88% | 31,618 psi | 89% | 2175 fps | 97.3% |
| ReloadSwiss RS 14 | <<locked>> | 98% | 31,546 psi | 89% | 1444 fps | 100% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 32,068 psi | 90% | 2073 fps | 96.4% |
| Vihtavuori N133 | <<locked>> | 84% | 30,995 psi | 87% | 2054 fps | 97.7% |
| Vihtavuori N135 | <<locked>> | 90% | 30,763 psi | 87% | 2129 fps | 98.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 28,326 psi | 80% | 2021 fps | 97% |
| Accurate 2495 | 30.7 gr | 84% | 23,830 psi | 67% | 1985 fps | 95.7% |
| Accurate 4064 | <<locked>> | 92% | 29,153 psi | 82% | 2126 fps | 95% |
| Alliant AR-Comp | <<locked>> | 80% | 25,991 psi | 73% | 2031 fps | 98.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,033 psi | 68% | 1273 fps | 100% |
| IMR 3031 | <<locked>> | 84% | 28,094 psi | 79% | 2090 fps | 95.8% |
| ReloadSwiss RS 14 | 10.3 gr | 80% | 23,946 psi | 67% | 1302 fps | 100% |
| SNPE Vectan Tubal 5000 | <<locked>> | 90% | 30,211 psi | 85% | 2034 fps | 95.7% |
| Vihtavuori N133 | <<locked>> | 80% | 27,238 psi | 77% | 1965 fps | 96.3% |
| Vihtavuori N135 | 29 gr | 82% | 24,192 psi | 68% | 1962 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
This overview compares 10 powders for 8 x 57 R 360 loaded with the .321 | 180gr | Frontier PH HPFB. IMR 3031 delivers the highest muzzle velocity at 2,175 fps; across all powders the maximum-charge window runs from 1,407 fps to 2,175 fps. Hodgdon TrailBoss gives the best case fill at 98 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (245 MPa), the top charges use 87–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.321" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Vihtavuori N135, ReloadSwiss RS 14 rank at the top here: for 8 x 57 R 360 with the .321 | 180gr | Frontier PH HPFB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.