Load data for 8 x 57 R 360 + .318 | 196gr | Impala RNFP KO

8 x 57 R 360 cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:196 gr
Bullet Diameter:0.318"
Bullet Length:<<locked>>
Case Length (l3):2.23"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:51.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:35,534 psi
Recommended Twist Rate:1:12.5

Load data in caliber 8 x 57 R 360 with .318 | 196gr | Impala RNFP KO bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>86%31,459 psi89%2024 fps98.9%
Accurate 4064<<locked>>88%31,473 psi89%2037 fps96.7%
Alliant AR-Comp<<locked>>82%31,966 psi90%2041 fps100%
Hodgdon TrailBoss<<locked>>96%31,995 psi90%1329 fps100%
IMR 3031<<locked>>82%30,516 psi86%2018 fps97.6%
Norma 202<<locked>>82%31,256 psi88%1991 fps95.9%
ReloadSwiss RS 14<<locked>>96%32,068 psi90%1358 fps100%
SNPE Vectan Tubal 5000<<locked>>86%30,603 psi86%1923 fps96.7%
Vihtavuori N135<<locked>>86%31,705 psi89%2018 fps98.8%
Vihtavuori N140<<locked>>84%31,227 psi88%1975 fps96.2%
Vihtavuori N540<<locked>>86%31,995 psi90%2008 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%26,571 psi75%1913 fps97.5%
Accurate 4064<<locked>>84%28,137 psi79%1962 fps95.3%
Alliant AR-Comp<<locked>>80%30,153 psi85%2001 fps99.8%
Hodgdon TrailBoss9.7 gr80%25,077 psi71%1207 fps100%
IMR 3031<<locked>>80%29,080 psi82%1985 fps97%
Norma 202<<locked>>80%29,515 psi83%1952 fps95.2%
ReloadSwiss RS 149.9 gr80%25,208 psi71%1237 fps100%
SNPE Vectan Tubal 5000<<locked>>82%27,427 psi77%1850 fps95.3%
Vihtavuori N135<<locked>>80%26,963 psi76%1906 fps97.4%
Vihtavuori N140<<locked>>82%29,573 psi83%1936 fps95.5%
Vihtavuori N540<<locked>>84%30,066 psi85%1965 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

This overview compares 11 powders for 8 x 57 R 360 loaded with the .318 | 196gr | Impala RNFP KO. Alliant AR-Comp delivers the highest muzzle velocity at 2,041 fps; across all powders the maximum-charge window runs from 1,329 fps to 2,041 fps. Hodgdon TrailBoss gives the best case fill at 96 %, and 11 of the 11 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (245 MPa), the top charges use 86–90 %, leaving at least 10 % headroom. The 196.0 gr projectile in 0.318" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 8 x 57 R 360 with the .318 | 196gr | Impala RNFP KO they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data