Load data for 8 x 51 mm Mauser + .318 | 150gr | Impala LWHV LS

8 x 51 mm Mauser cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:150 gr
Bullet Diameter:0.318"
Bullet Length:<<locked>>
Case Length (l3):1.992"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:11.5

Load data in caliber 8 x 51 mm Mauser with .318 | 150gr | Impala LWHV LS bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, ADI AR 2207 and SNPE Vectan SP 3.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%44,237 psi90%2408 fps99.2%
Accurate 2015<<locked>>98%42,888 psi87%2470 fps98.4%
Accurate 2495ᴾ<<locked>>100%34,708 psi70%2398 fps97%
Accurate LT-30<<locked>>88%42,206 psi86%2362 fps96.7%
ADI AR 2207<<locked>>88%43,700 psi89%2467 fps100%
ADI AR 2219<<locked>>92%44,425 psi90%2526 fps97%
Alliant AR-Compᴾ<<locked>>100%41,974 psi85%2533 fps99.8%
Alliant Reloder-10x<<locked>>94%43,743 psi89%2503 fps99.3%
Alliant Reloder-7<<locked>>86%43,526 psi88%2431 fps99.5%
Baschieri & Pellagri 106<<locked>>90%42,424 psi86%2395 fps97.1%
Hodgdon H322<<locked>>94%42,931 psi87%2500 fps96.7%
Hodgdon H4198<<locked>>86%43,758 psi89%2402 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%32,053 psi65%1532 fps100%
IMR 3031ᴾ<<locked>>100%40,161 psi81%2507 fps96.8%
IMR 4198<<locked>>92%43,207 psi88%2444 fps99.7%
IMR 4227<<locked>>82%44,280 psi90%2395 fps100%
Lovex S053<<locked>>82%43,424 psi88%2359 fps100%
Norma 200<<locked>>88%42,264 psi86%2454 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%31,850 psi65%1565 fps100%
ReloadSwiss RS 36<<locked>>82%43,845 psi89%2428 fps100%
SNPE Vectan BA6 1/2<<locked>>84%42,772 psi87%2218 fps100%
SNPE Vectan SP 3<<locked>>94%44,599 psi90%2500 fps98%
Somchem S335ᴾ<<locked>>100%43,134 psi87%2441 fps96.6%
Vihtavuori N120<<locked>>88%43,729 psi89%2428 fps100%
Vihtavuori N130<<locked>>94%42,322 psi86%2418 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%43,497 psi88%2444 fps98.3%
Vihtavuori N135ᴾ<<locked>>100%36,230 psi73%2395 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,102 psi79%2320 fps98.4%
Accurate 2015<<locked>>88%32,256 psi65%2260 fps95.6%
Accurate 2495<<locked>>96%30,719 psi62%2310 fps95.6%
Accurate LT-30<<locked>>84%37,927 psi77%2280 fps95.6%
ADI AR 220726.6 gr80%34,867 psi71%2306 fps99.9%
ADI AR 2219<<locked>>88%39,247 psi80%2428 fps95.6%
Alliant AR-Comp<<locked>>84%26,832 psi54%2178 fps95.7%
Alliant Reloder-10x26.8 gr80%29,457 psi60%2205 fps95.9%
Alliant Reloder-7<<locked>>80%36,579 psi74%2300 fps98.4%
Baschieri & Pellagri 106<<locked>>84%35,491 psi72%2264 fps95.1%
Hodgdon H322<<locked>>90%38,290 psi78%2408 fps95.3%
Hodgdon H4198<<locked>>82%39,291 psi80%2316 fps95.3%
Hodgdon TrailBoss<<locked>>80%23,844 psi48%1368 fps100%
IMR 3031<<locked>>96%35,810 psi73%2415 fps95.4%
IMR 4198<<locked>>80%31,459 psi64%2201 fps97.4%
IMR 4227<<locked>>80%41,713 psi85%2352 fps99.9%
Lovex S053<<locked>>80%41,292 psi84%2326 fps100%
Norma 200<<locked>>80%33,562 psi68%2283 fps98%
ReloadSwiss RS 14<<locked>>80%23,830 psi48%1401 fps100%
ReloadSwiss RS 36<<locked>>80%41,394 psi84%2385 fps99.9%
SNPE Vectan BA6 1/2<<locked>>80%38,493 psi78%2152 fps100%
SNPE Vectan SP 328.9 gr86%35,476 psi72%2323 fps95.6%
Somchem S335<<locked>>96%38,508 psi78%2359 fps95.3%
Vihtavuori N120<<locked>>80%34,954 psi71%2274 fps100%
Vihtavuori N130<<locked>>80%28,674 psi58%2133 fps95.1%
Vihtavuori N133<<locked>>90%33,243 psi67%2244 fps95.5%
Vihtavuori N135<<locked>>94%30,821 psi63%2270 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 8 x 51 mm Mauser loaded with the .318 | 150gr | Impala LWHV LS. Alliant AR-Comp delivers the highest muzzle velocity at 2,533 fps; across all powders the maximum-charge window runs from 1,532 fps to 2,533 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.318" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, ADI AR 2207, SNPE Vectan SP 3 rank at the top here: for 8 x 51 mm Mauser with the .318 | 150gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data