Load data for 7.92 x 33 kurz + .321 | 170gr | Hornady InterLock FP

Recommended Powder(s): Alliant 2400, Ramshot Enforcer, SNPE Vectan BA6 1/2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.321 \| 170gr \| Hornady InterLock FP
Manufacturer SKU:	3210
Bullet Weight:	170gr \| 11.0g
Bullet Diameter:	0.321" \| 8.15mm
Bullet Length:	0.784" \| 19.9mm
Caliber:	7.92 x 33 kurz load data
Case Length (l3):	1.299" \| 33.0mm
Cartridge Length (C.O.L.):	1.862" \| 47.3mm
Seated Depth:	0.221" \| 5.6mm
Shank Seated Depth:	0.221" \| 5.6mm
Case Capacity:	34.2 Grains of Water \| 2.22 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	49313 psi \| 3400 bar
LID:	LID_B2734_C1139
Last updated:	2025-02-02

Load data for 74 loads in caliber 7.92 x 33 kurz with .321 | 170gr | Hornady InterLock FP bullet and 37 powders such as Alliant 2400, Ramshot Enforcer, SNPE Vectan BA6 1/2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	42743	87%	**68	100%
ADI APS 350	<<locked>>	68%	42844	87%	**42	100%
ADI APS 450	<<locked>>	69%	43221	88%	**68	100%
ADI AS 30	<<locked>>	66%	42380	86%	**75	100%
Accurate 4100	<<locked>>	71%	43830	89%	**76	97%
Accurate No. 11 FS	<<locked>>	79%	43352	88%	**83	91%
Accurate Solo 1000	<<locked>>	65%	43729	89%	**11	100%
Accurate Solo 1250	<<locked>>	65%	43801	89%	**43	100%
Alliant 2400 👍	<<locked>>	68%	43714	89%	**90	99%
Alliant BLUE DOT	<<locked>>	72%	43685	89%	**47	100%
Alliant UNIQUE	<<locked>>	63%	44251	90%	**02	100%
Baschieri & Pellagri 100	<<locked>>	63%	43105	87%	**94	100%
Hodgdon Clays	<<locked>>	68%	43816	89%	**61	100%
Hodgdon H110	<<locked>>	75%	44092	89%	**99	95%
Hodgdon LilGun	<<locked>>	74%	42989	87%	**03	99%
Hodgdon TrailBoss	<<locked>>	94%	26948	55%	**4	100%
Maxam CSB 1	<<locked>>	67%	42525	86%	**30	100%
Maxam CSB 2	<<locked>>	63%	43932	89%	**24	100%
Maxam CSB 3	<<locked>>	65%	43120	87%	**20	100%
Maxam CSB 4	<<locked>>	63%	42453	86%	**01	100%
Maxam CSB 5	<<locked>>	63%	44135	90%	**84	100%
Ramshot Enforcer 👍	<<locked>>	67%	42873	87%	**73	99%
ReloadSwiss RS 14	<<locked>>	97%	27775	56%	**10	100%
ReloadSwiss RS 20	<<locked>>	63%	44135	90%	**83	100%
ReloadSwiss RS 30	<<locked>>	90%	43845	89%	**29	97%
SNPE Vectan A0	<<locked>>	66%	43076	87%	**70	100%
SNPE Vectan BA10	<<locked>>	65%	44106	89%	**78	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	93%	44150	90%	**73	100%
SNPE Vectan BA7 1/2	<<locked>>	68%	43758	89%	**25	100%
Somchem MS200	<<locked>>	63%	44106	89%	**89	100%
Somchem S265	<<locked>>	83%	42975	87%	**50	93%
Vihtavuori 3N38	<<locked>>	68%	42830	87%	**07	100%
Vihtavuori N105	<<locked>>	70%	43091	87%	**14	100%
Vihtavuori N110	<<locked>>	84%	43845	89%	**90	99%
Vihtavuori N32C Tin Star	<<locked>>	84%	42772	87%	**42	100%
Vihtavuori N350	<<locked>>	64%	43758	89%	**35	100%
Winchester 296	<<locked>>	74%	43555	88%	**16	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	31444	64%	**27	100%
ADI APS 350	<<locked>>	61%	36854	75%	**79	100%
ADI APS 450	<<locked>>	61%	35969	73%	**83	100%
ADI AS 30	<<locked>>	61%	38595	78%	**32	100%
Accurate 4100	<<locked>>	61%	31285	63%	**89	92%
[Accurate No. 11 FS]*	<<locked>>	62%	24961	51%	**88	80%
Accurate Solo 1000	<<locked>>	61%	39856	81%	**71	100%
Accurate Solo 1250	<<locked>>	61%	39755	81%	**01	100%
Alliant 2400	<<locked>>	61%	34867	71%	**58	96%
Alliant BLUE DOT	<<locked>>	61%	31749	64%	**76	99%
Alliant UNIQUE	<<locked>>	61%	42424	86%	**86	100%
Baschieri & Pellagri 100	<<locked>>	61%	41205	84%	**81	100%
Hodgdon Clays	<<locked>>	61%	38058	77%	**96	100%
[Hodgdon H110]*	<<locked>>	61%	27659	56%	**53	86%
Hodgdon LilGun	<<locked>>	61%	26992	55%	**60	92%
Hodgdon TrailBoss	<<locked>>	60%	14895	30%	**1	100%
Maxam CSB 1	<<locked>>	61%	36956	75%	**65	100%
Maxam CSB 2	<<locked>>	61%	42003	85%	**04	100%
Maxam CSB 3	<<locked>>	61%	39189	79%	**78	100%
Maxam CSB 4	<<locked>>	61%	40654	82%	**78	100%
Maxam CSB 5	<<locked>>	61%	42177	86%	**68	100%
Ramshot Enforcer	<<locked>>	61%	34258	69%	**42	97%
ReloadSwiss RS 14	<<locked>>	61%	14750	30%	**7	100%
ReloadSwiss RS 20	<<locked>>	61%	42148	85%	**70	100%
[ReloadSwiss RS 30]*	<<locked>>	62%	18768	38%	**79	80%
SNPE Vectan A0	<<locked>>	61%	37594	76%	**11	100%
SNPE Vectan BA10	<<locked>>	61%	40422	82%	**38	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	18115	37%	**30	88%
SNPE Vectan BA7 1/2	<<locked>>	61%	35491	72%	**40	100%
Somchem MS200	<<locked>>	61%	42148	85%	**63	100%
[Somchem S265]*	<<locked>>	61%	22481	46%	**15	81%
Vihtavuori 3N38	<<locked>>	61%	34838	71%	**02	100%
Vihtavuori N105	<<locked>>	61%	32866	67%	**86	100%
[Vihtavuori N110]*	<<locked>>	61%	22075	45%	**35	89%
Vihtavuori N32C Tin Star	<<locked>>	61%	27050	55%	**1	100%
Vihtavuori N350	<<locked>>	61%	39943	81%	**86	100%
[Winchester 296]*	<<locked>>	61%	28108	57%	**70	83%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data