Load data for 7.7 x 58 mm Arisaka + .311 | 130gr | Impala LWHV LS

7.7 x 58 mm Arisaka cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:130 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.27"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:61 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.9"
Max. allowed Pressure:44,962 psi
Recommended Twist Rate:1:11.0

Load data in caliber 7.7 x 58 mm Arisaka with .311 | 130gr | Impala LWHV LS bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Alliant AR-Comp and Accurate 4064.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.9"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>86%39,885 psi89%2743 fps99.4%
Accurate 2460<<locked>>82%38,290 psi85%2726 fps96.6%
Accurate 2495<<locked>>92%38,609 psi86%2785 fps99.4%
Accurate 2520<<locked>>88%40,408 psi90%2818 fps96.8%
Accurate 4064<<locked>>94%38,305 psi85%2795 fps97.5%
Alliant AR-Comp<<locked>>88%38,740 psi86%2815 fps100%
Alliant Reloder-10x<<locked>>82%40,248 psi90%2766 fps99.8%
Hodgdon H322<<locked>>82%38,580 psi86%2762 fps98%
Hodgdon H335<<locked>>82%39,015 psi87%2772 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%33,475 psi74%1814 fps100%
IMR 3031<<locked>>90%39,407 psi88%2844 fps98.9%
Lovex D073.5<<locked>>84%40,582 psi90%2776 fps95.9%
Lovex D073.6<<locked>>90%38,696 psi86%2792 fps96.3%
Norma 202<<locked>>90%40,074 psi89%2795 fps97.4%
ReloadSwiss RS 14ᴾ<<locked>>100%33,591 psi75%1857 fps100%
ReloadSwiss RS 40<<locked>>82%38,464 psi86%2730 fps95.8%
Rottweil R 901<<locked>>86%40,437 psi90%2753 fps97.2%
Shooters World Match Rifle<<locked>>90%38,696 psi86%2792 fps96.3%
SNPE Vectan SP 3<<locked>>82%40,379 psi90%2762 fps99%
SNPE Vectan Tubal 3000<<locked>>88%40,466 psi90%2707 fps97.3%
SNPE Vectan Tubal 5000<<locked>>94%39,088 psi87%2697 fps98.1%
Somchem S335<<locked>>88%39,595 psi88%2710 fps98%
Vihtavuori N130<<locked>>84%40,654 psi90%2717 fps99.8%
Vihtavuori N133<<locked>>88%39,900 psi89%2713 fps99.3%
Vihtavuori N135<<locked>>92%38,537 psi86%2776 fps99.4%
Vihtavuori N140<<locked>>92%40,205 psi89%2772 fps97.8%
Vihtavuori N540<<locked>>92%38,856 psi86%2762 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.9"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%33,576 psi75%2598 fps98.2%
Accurate 2460<<locked>>80%36,027 psi80%2674 fps95.9%
Accurate 2495<<locked>>80%26,992 psi60%2487 fps96.4%
Accurate 2520<<locked>>84%35,476 psi79%2707 fps95.3%
Accurate 406440.9 gr88%32,126 psi71%2648 fps95.6%
Alliant AR-Comp36.8 gr80%30,545 psi68%2612 fps99.4%
Alliant Reloder-10x<<locked>>80%37,985 psi84%2717 fps99.6%
Hodgdon H322<<locked>>80%36,143 psi80%2707 fps97.3%
Hodgdon H335<<locked>>80%36,666 psi82%2720 fps96.4%
Hodgdon TrailBoss<<locked>>80%24,976 psi56%1624 fps100%
IMR 303136.8 gr80%29,414 psi65%2582 fps95.8%
Lovex D073.5<<locked>>82%37,884 psi84%2713 fps95.1%
Lovex D073.6<<locked>>88%36,303 psi81%2740 fps95.6%
Norma 202<<locked>>84%33,591 psi75%2644 fps95.5%
ReloadSwiss RS 14<<locked>>80%25,179 psi56%1667 fps100%
ReloadSwiss RS 40<<locked>>80%36,129 psi80%2674 fps95%
Rottweil R 901<<locked>>80%34,200 psi76%2602 fps95.2%
Shooters World Match Rifle<<locked>>88%36,303 psi81%2740 fps95.6%
SNPE Vectan SP 3<<locked>>80%38,043 psi85%2713 fps98.5%
SNPE Vectan Tubal 3000<<locked>>82%34,055 psi76%2559 fps95.4%
SNPE Vectan Tubal 5000<<locked>>86%31,111 psi69%2507 fps95.6%
Somchem S335<<locked>>80%31,604 psi70%2516 fps95.6%
Vihtavuori N130<<locked>>80%36,274 psi81%2621 fps99.3%
Vihtavuori N133<<locked>>80%31,705 psi71%2526 fps97.5%
Vihtavuori N135<<locked>>80%27,209 psi61%2480 fps96.1%
Vihtavuori N140<<locked>>84%31,836 psi71%2572 fps95.1%
Vihtavuori N540<<locked>>88%34,606 psi77%2661 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7.7 x 58 mm Arisaka loaded with the .311 | 130gr | Impala LWHV LS. IMR 3031 delivers the highest muzzle velocity at 2,844 fps; across all powders the maximum-charge window runs from 1,814 fps to 2,844 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (310 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.311" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Alliant AR-Comp, Accurate 4064 rank at the top here: for 7.7 x 58 mm Arisaka with the .311 | 130gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data