Load data for 7.62 x 39 (.308) Russian + .308 | 220gr | Winchester Silvertip

7.62 x 39 (.308) Russian cartridge drawing
Winchester logo

Load Specifications

Bullet Manufacturer:Winchester
Bullet Weight:220 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.523"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:35.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:16"
Max. allowed Pressure:51,488 psi
Recommended Twist Rate:1:6.0

Load data in caliber 7.62 x 39 (.308) Russian with .308 | 220gr | Winchester Silvertip bullet and 44 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%45,223 psi88%1699 fps99.9%
Accurate 2015<<locked>>96%44,889 psi87%1755 fps99.6%
Accurate 2460<<locked>>94%46,166 psi90%1785 fps97.8%
Accurate 2495ᴾ<<locked>>100%38,740 psi75%1736 fps99.1%
Accurate 2520<<locked>>98%46,383 psi90%1818 fps97.5%
Accurate 4064ᴾ<<locked>>100%36,100 psi70%1709 fps96.3%
Accurate LT-30<<locked>>88%45,832 psi89%1703 fps98.9%
Accurate LT-32<<locked>>88%46,296 psi90%1709 fps97.4%
ADI AR 2207<<locked>>86%45,701 psi89%1736 fps100%
ADI AR 2219<<locked>>90%46,253 psi90%1798 fps98.9%
Alliant AR-Comp<<locked>>98%44,063 psi86%1804 fps100%
Alliant Reloder-10x<<locked>>92%45,934 psi89%1775 fps100%
Alliant Reloder-7<<locked>>84%44,367 psi86%1709 fps100%
Baschieri & Pellagri 106<<locked>>88%44,179 psi86%1703 fps98.8%
Hodgdon Benchmark<<locked>>94%44,831 psi87%1732 fps95.8%
Hodgdon H322<<locked>>92%44,614 psi87%1778 fps98.6%
Hodgdon H335<<locked>>92%45,353 psi88%1791 fps97.9%
Hodgdon H4198<<locked>>84%45,005 psi87%1703 fps98.4%
Hodgdon TrailBossᴾ<<locked>>100%32,155 psi62%1070 fps100%
IMR 3031ᴾ<<locked>>100%44,672 psi87%1824 fps99.3%
IMR 4198<<locked>>90%45,237 psi88%1732 fps100%
Lovex D073.4<<locked>>86%44,034 psi86%1762 fps96.8%
Lovex D073.5<<locked>>94%46,282 psi90%1788 fps96.6%
Lovex D073.6ᴾ<<locked>>100%43,685 psi85%1795 fps96.9%
Norma 200<<locked>>88%46,050 psi89%1762 fps100%
Norma 202ᴾ<<locked>>100%45,165 psi88%1791 fps97.9%
ReloadSwiss RS 14ᴾ<<locked>>100%32,169 psi62%1096 fps100%
ReloadSwiss RS 40<<locked>>92%44,338 psi86%1759 fps96.6%
Rottweil R 901<<locked>>96%44,135 psi86%1752 fps97.5%
Shooters World AR Plus<<locked>>86%44,034 psi86%1762 fps96.8%
Shooters World Match Rifleᴾ<<locked>>100%43,685 psi85%1795 fps96.9%
SNPE Vectan BA6 1/2<<locked>>84%46,137 psi90%1572 fps100%
SNPE Vectan SP 10<<locked>>88%43,700 psi85%1765 fps97.5%
SNPE Vectan SP 3<<locked>>90%43,845 psi85%1745 fps99.1%
SNPE Vectan Tubal 3000<<locked>>98%46,296 psi90%1736 fps97.9%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%39,349 psi76%1663 fps97.5%
Somchem S335<<locked>>98%44,889 psi87%1739 fps98.5%
Vihtavuori N120<<locked>>86%45,818 psi89%1709 fps100%
Vihtavuori N130<<locked>>94%46,383 psi90%1739 fps99.9%
Vihtavuori N133<<locked>>98%45,469 psi88%1739 fps99.6%
Vihtavuori N135ᴾ<<locked>>100%40,205 psi78%1739 fps99.3%
Vihtavuori N140ᴾ<<locked>>100%43,076 psi84%1749 fps97.8%
Vihtavuori N540ᴾ<<locked>>100%41,669 psi81%1742 fps96.8%
Winchester 748<<locked>>98%45,629 psi89%1818 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%42,148 psi82%1663 fps99.7%
Accurate 2015<<locked>>80%27,557 psi54%1503 fps95.6%
Accurate 2460<<locked>>86%35,447 psi69%1647 fps95.1%
Accurate 2495<<locked>>88%26,107 psi51%1535 fps95.5%
Accurate 252025.7 gr92%37,623 psi73%1706 fps95.3%
Accurate 4064<<locked>>98%33,924 psi66%1677 fps95.6%
Accurate LT-30<<locked>>80%36,216 psi70%1578 fps97%
Accurate LT-32<<locked>>82%38,856 psi75%1614 fps95.6%
ADI AR 2207<<locked>>80%37,956 psi74%1647 fps100%
ADI AR 221921.9 gr80%33,446 psi65%1621 fps95.8%
Alliant AR-Comp<<locked>>80%25,324 psi49%1506 fps97.2%
Alliant Reloder-10x<<locked>>80%31,821 psi62%1585 fps98.3%
Alliant Reloder-7<<locked>>80%39,378 psi76%1650 fps99.8%
Baschieri & Pellagri 106<<locked>>80%34,258 psi67%1572 fps96.7%
Hodgdon Benchmark<<locked>>92%42,395 psi82%1699 fps95.1%
Hodgdon H32221.7 gr82%32,663 psi63%1608 fps95.5%
Hodgdon H335<<locked>>84%35,143 psi68%1654 fps95.1%
Hodgdon H4198<<locked>>80%39,987 psi78%1637 fps97.4%
Hodgdon TrailBoss<<locked>>80%23,627 psi46%951 fps100%
IMR 3031<<locked>>88%30,792 psi60%1617 fps95.7%
IMR 4198<<locked>>80%33,794 psi66%1581 fps99.3%
Lovex D073.4<<locked>>82%38,435 psi75%1690 fps95.3%
Lovex D073.5<<locked>>90%40,596 psi79%1716 fps95.1%
Lovex D073.6<<locked>>96%38,072 psi74%1722 fps95.4%
Norma 200<<locked>>80%35,795 psi70%1634 fps99.5%
Norma 202<<locked>>92%35,592 psi69%1663 fps95.5%
ReloadSwiss RS 14<<locked>>80%23,801 psi46%981 fps100%
ReloadSwiss RS 40<<locked>>88%39,363 psi76%1696 fps95.3%
Rottweil R 901<<locked>>88%35,041 psi68%1624 fps95%
Shooters World AR Plus<<locked>>82%38,435 psi75%1690 fps95.3%
Shooters World Match Rifle<<locked>>96%38,072 psi74%1722 fps95.4%
SNPE Vectan BA6 1/2<<locked>>80%41,350 psi80%1526 fps100%
SNPE Vectan SP 10<<locked>>82%35,868 psi70%1657 fps95.4%
SNPE Vectan SP 3<<locked>>80%32,285 psi63%1581 fps96.5%
SNPE Vectan Tubal 3000<<locked>>90%36,303 psi71%1608 fps95.5%
SNPE Vectan Tubal 5000<<locked>>94%32,924 psi64%1572 fps95.5%
Somchem S335<<locked>>88%33,228 psi65%1581 fps95.6%
Vihtavuori N120<<locked>>80%38,130 psi74%1624 fps100%
Vihtavuori N130<<locked>>80%30,516 psi59%1526 fps97.6%
Vihtavuori N133<<locked>>82%28,195 psi55%1496 fps95.6%
Vihtavuori N135<<locked>>86%26,310 psi51%1516 fps95.1%
Vihtavuori N140<<locked>>92%33,721 psi65%1617 fps95.1%
Vihtavuori N540<<locked>>96%36,695 psi71%1677 fps95.4%
Winchester 748<<locked>>96%42,583 psi83%1778 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 44 powders for 7.62 x 39 (.308) Russian loaded with the .308 | 220gr | Winchester Silvertip. IMR 3031 delivers the highest muzzle velocity at 1,824 fps; across all powders the maximum-charge window runs from 1,070 fps to 1,824 fps. Accurate 2495 gives the best case fill at 100 %, and 44 of the 44 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (355 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. The 220.0 gr projectile in 0.308" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, ADI AR 2219 rank at the top here: for 7.62 x 39 (.308) Russian with the .308 | 220gr | Winchester Silvertip they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data