top of page

Load data for 7.62 x 39 (.308) Russ. + .308 | 150gr | Hornady InterLock RN

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

7.62 x 39 (.308) Russ. + .308 | 150gr | Hornady InterLock RN

Load Specifications

Bullet:
.308 | 150gr | Hornady InterLock RN
Manufacturer SKU:
3035
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.905" | 23.0mm
Caliber:
7.62 x 39 (.308) Russ.
Case Length (l3):
1.523" | 38.7mm
Cartridge Length (C.O.L.):
2.157" | 54.8mm
Seated Depth:
0.271" | 6.9mm
Shank Seated Depth:
0.271" | 6.9mm
Case Capacity:
35.6 Grains of Water | 2.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B2670_C1118

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber 7.62 x 39 (.308) Russ. with .308 | 150gr | Hornady InterLock RN bullet and 28 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
94%
44701
87%
**83
100%
ADI AR 2219
<<locked>>
97%
44860
87%
**10
97%
Accurate 1680
<<locked>>
85%
45832
89%
**51
98%
Accurate 2015
<<locked>>
97%
36303
71%
**69
97%
[Accurate 2495]*
<<locked>>
96%
26542
52%
**73
93%
Alliant AR-Comp
<<locked>>
97%
32706
64%
**49
98%
Alliant Reloder-10x
<<locked>>
96%
39407
77%
**34
98%
Alliant Reloder-7 👍
<<locked>>
92%
45281
88%
**57
99%
Baschieri & Pellagri 106
<<locked>>
96%
45600
89%
**28
97%
[Hodgdon CFE BLK]*
<<locked>>
92%
45034
87%
**98
92%
[Hodgdon H322]*
<<locked>>
97%
37173
72%
**85
94%
Hodgdon H335
<<locked>>
96%
43004
84%
**83
95%
Hodgdon H4198
<<locked>>
94%
46079
90%
**24
96%
IMR 4198 👍
<<locked>>
97%
43468
84%
**41
99%
IMR 4227
<<locked>>
87%
45368
88%
**11
100%
[Lovex D073.4]*
<<locked>>
96%
40118
78%
**05
92%
Lovex S053
<<locked>>
88%
45397
88%
**98
100%
Norma 200 👍
<<locked>>
96%
45571
89%
**06
100%
ReloadSwiss RS 36
<<locked>>
88%
45905
89%
**57
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
39334
76%
**01
92%
[Rottweil R 901]*
<<locked>>
96%
33591
65%
**03
92%
SNPE Vectan BA6 1/2
<<locked>>
92%
46021
89%
**83
100%
SNPE Vectan SP 10
<<locked>>
97%
44237
86%
**03
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
96%
34098
66%
**57
92%
[Somchem S335]*
<<locked>>
96%
32648
63%
**57
93%
Vihtavuori N120 👍
<<locked>>
97%
45310
88%
**51
100%
Vihtavuori N130
<<locked>>
96%
37768
73%
**46
98%
[Vihtavuori N133]*
<<locked>>
97%
31488
61%
**31
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
29892
58%
**44
99%
[ADI AR 2219]*
<<locked>>
83%
28543
55%
**01
90%
Accurate 1680
<<locked>>
81%
39668
77%
**56
96%
[Accurate 2015]*
<<locked>>
81%
21944
43%
**50
90%
[Accurate 2495]*
<<locked>>
91%
22162
43%
**52
90%
[Alliant AR-Comp]*
<<locked>>
82%
21103
41%
**34
91%
[Alliant Reloder-10x]*
<<locked>>
81%
24642
48%
**29
93%
Alliant Reloder-7
<<locked>>
81%
31952
62%
**37
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
28137
55%
**23
91%
[Hodgdon CFE BLK]*
<<locked>>
88%
40596
79%
**29
90%
[Hodgdon H322]*
<<locked>>
88%
28210
55%
**91
90%
[Hodgdon H335]*
<<locked>>
86%
30864
60%
**57
90%
[Hodgdon H4198]*
<<locked>>
81%
31459
61%
**75
92%
IMR 4198
<<locked>>
81%
27746
54%
**46
96%
IMR 4227
<<locked>>
81%
37898
74%
**00
100%
[Lovex D073.4]*
<<locked>>
93%
35926
70%
**36
90%
Lovex S053
<<locked>>
81%
36622
71%
**73
100%
Norma 200
<<locked>>
81%
27717
54%
**95
96%
ReloadSwiss RS 36
<<locked>>
81%
37086
72%
**26
99%
[ReloadSwiss RS 40]*
<<locked>>
92%
34447
67%
**13
90%
[Rottweil R 901]*
<<locked>>
92%
30269
59%
**34
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
34548
67%
**32
100%
[SNPE Vectan SP 10]*
<<locked>>
85%
30734
60%
**60
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
93%
30487
59%
**88
90%
[Somchem S335]*
<<locked>>
91%
27673
54%
**55
90%
Vihtavuori N120
<<locked>>
81%
28471
55%
**78
99%
[Vihtavuori N130]*
<<locked>>
81%
23989
47%
**60
92%
[Vihtavuori N133]*
<<locked>>
87%
24120
47%
**54
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page