top of page

Load data for 7.62 x 39 (.308) Russ. + .308 | 134gr | CutEdge ESP Raptor

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

7.62 x 39 (.308) Russ. + .308 | 134gr | CutEdge ESP Raptor

Load Specifications

Bullet:
.308 | 134gr | CutEdge ESP Raptor
Manufacturer SKU:
ESP C130 RAPTOR WT
Bullet Weight:
134gr | 8.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.415" | 35.9mm
Caliber:
7.62 x 39 (.308) Russ.
Case Length (l3):
1.523" | 38.7mm
Cartridge Length (C.O.L.):
2.157" | 54.8mm
Seated Depth:
0.781" | 19.8mm
Shank Seated Depth:
0.781" | 19.8mm
Case Capacity:
35.6 Grains of Water | 2.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B8472_C1118

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 32 loads in caliber 7.62 x 39 (.308) Russ. with .308 | 134gr | CutEdge ESP Raptor bullet and 16 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
94%
46035
89%
**67
100%
[ADI AR 2207]*
<<locked>>
97%
28210
55%
**42
94%
Accurate 5744
<<locked>>
91%
45092
88%
**29
95%
Accurate No. 11 FS 👍
<<locked>>
92%
46093
90%
**36
99%
Hodgdon LilGun
<<locked>>
89%
45556
88%
**95
100%
IMR 4227
<<locked>>
95%
36898
72%
**05
95%
Lovex D060
<<locked>>
93%
45092
88%
**29
95%
Lovex D063
<<locked>>
91%
45484
88%
**23
95%
Lovex S040
<<locked>>
86%
44904
87%
**57
100%
Lovex S053
<<locked>>
95%
34374
67%
**95
98%
[ReloadSwiss RS 36]*
<<locked>>
95%
34635
67%
**14
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
33359
65%
**03
100%
Shooters World Blackout
<<locked>>
91%
45484
88%
**23
95%
Shooters World Buffalo Rifle
<<locked>>
93%
45092
88%
**29
95%
Vihtavuori N110 👍
<<locked>>
96%
42467
82%
**80
100%
[Vihtavuori N120]*
<<locked>>
96%
26527
52%
**73
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
30603
59%
**34
97%
[ADI AR 2207]*
<<locked>>
90%
23061
45%
**11
90%
[Accurate 5744]*
<<locked>>
81%
33185
64%
**32
91%
Accurate No. 11 FS
<<locked>>
81%
31995
62%
**29
95%
Hodgdon LilGun
<<locked>>
81%
34722
67%
**54
100%
[IMR 4227]*
<<locked>>
83%
25831
50%
**85
90%
[Lovex D060]*
<<locked>>
81%
31502
61%
**00
91%
[Lovex D063]*
<<locked>>
81%
33678
65%
**39
92%
Lovex S040
<<locked>>
81%
38189
74%
**69
100%
[Lovex S053]*
<<locked>>
81%
22713
44%
**52
94%
[ReloadSwiss RS 36]*
<<locked>>
87%
27195
53%
**64
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
21712
42%
**80
99%
[Shooters World Blackout]*
<<locked>>
81%
33678
65%
**39
92%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
31502
61%
**00
91%
Vihtavuori N110
<<locked>>
81%
27050
53%
**41
100%
[Vihtavuori N120]*
<<locked>>
89%
21843
42%
**49
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page