top of page

Load data for 7.62 x 39 (.308) Russ. + .308 | 125gr | Winchester Pointed Soft Point

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

7.62 x 39 (.308) Russ. + .308 | 125gr | Winchester Pointed Soft Point

Load Specifications

Bullet:
.308 | 125gr | Winchester Pointed Soft Point
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
7.62 x 39 (.308) Russ.
Case Length (l3):
1.523" | 38.7mm
Cartridge Length (C.O.L.):
2.157" | 54.8mm
Seated Depth:
0.366" | 9.3mm
Shank Seated Depth:
0.366" | 9.3mm
Case Capacity:
35.6 Grains of Water | 2.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B6628_C1118

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 42 loads in caliber 7.62 x 39 (.308) Russ. with .308 | 125gr | Winchester Pointed Soft Point bullet and 21 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
86%
88%
100%
ADI AR 2207
96%
73%
99%
Accurate 1680
91%
88%
95%
Accurate 5744
83%
87%
98%
Accurate No. 11 FS
84%
88%
100%
Alliant Reloder-10x
97%
62%
93%
Alliant Reloder-7
96%
80%
97%
Hodgdon H4198
96%
79%
91%
IMR 4198
97%
70%
95%
IMR 4227
94%
89%
99%
Lovex D060
86%
88%
98%
Lovex D063
83%
89%
98%
Lovex S053
96%
89%
100%
Norma 200
97%
69%
96%
ReloadSwiss RS 36
94%
87%
99%
SNPE Vectan BA6 1/2
97%
85%
100%
Shooters World Blackout
83%
89%
98%
Shooters World Buffalo Rifle
86%
88%
98%
Vihtavuori N110
89%
89%
100%
Vihtavuori N120
96%
70%
99%
Vihtavuori N130
96%
58%
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
81%
76%
100%
ADI AR 2207
81%
47%
94%
Accurate 1680
82%
65%
91%
Accurate 5744
81%
81%
97%
Accurate No. 11 FS
81%
82%
99%
Alliant Reloder-10x
91%
51%
90%
Alliant Reloder-7
81%
49%
90%
Hodgdon H4198
94%
73%
90%
IMR 4198
85%
51%
90%
IMR 4227
81%
61%
96%
Lovex D060
81%
76%
96%
Lovex D063
81%
83%
97%
Lovex S053
81%
59%
99%
Norma 200
85%
47%
90%
ReloadSwiss RS 36
81%
58%
95%
SNPE Vectan BA6 1/2
81%
56%
100%
Shooters World Blackout
81%
83%
97%
Shooters World Buffalo Rifle
81%
76%
96%
Vihtavuori N110
81%
70%
100%
Vihtavuori N120
81%
45%
95%
Vihtavuori N130
94%
54%
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page