top of page

Load data for 7.62 x 39 (.308) Russ. + .308 | 120gr | Barnes TAC-TX BT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

7.62 x 39 (.308) Russ. + .308 | 120gr | Barnes TAC-TX BT

Load Specifications

Bullet:
.308 | 120gr | Barnes TAC-TX BT
Manufacturer SKU:
30320
Bullet Weight:
120gr | 7.8g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.080" | 27.4mm
Caliber:
7.62 x 39 (.308) Russ.
Case Length (l3):
1.523" | 38.7mm
Cartridge Length (C.O.L.):
2.157" | 54.8mm
Seated Depth:
0.446" | 11.3mm
Shank Seated Depth:
0.321" | 8.2mm
Case Capacity:
35.6 Grains of Water | 2.31 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
51488 psi | 3550 bar
LID:
LID_B593_C1118

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 36 loads in caliber 7.62 x 39 (.308) Russ. with .308 | 120gr | Barnes TAC-TX BT bullet and 18 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
45977
89%
**26
100%
ADI AR 2207
<<locked>>
96%
35157
68%
**29
98%
[Accurate 1680]*
<<locked>>
94%
46325
90%
**21
94%
Accurate 5744
<<locked>>
86%
45542
88%
**11
97%
Accurate No. 11 FS 👍
<<locked>>
86%
45382
88%
**92
99%
Alliant Reloder-7
<<locked>>
96%
37782
73%
**20
95%
[IMR 4198]*
<<locked>>
96%
32880
64%
**01
93%
IMR 4227
<<locked>>
96%
45498
88%
**02
98%
Lovex D060
<<locked>>
89%
46238
90%
**28
97%
Lovex D063
<<locked>>
85%
45237
88%
**95
97%
Lovex S053
<<locked>>
96%
43105
84%
**72
100%
[Norma 200]*
<<locked>>
96%
31067
60%
**51
93%
ReloadSwiss RS 36
<<locked>>
96%
43685
85%
**15
98%
SNPE Vectan BA6 1/2
<<locked>>
96%
39726
77%
**21
100%
Shooters World Blackout
<<locked>>
85%
45237
88%
**95
97%
Shooters World Buffalo Rifle
<<locked>>
89%
46238
90%
**28
97%
Vihtavuori N110
<<locked>>
91%
45092
88%
**59
100%
Vihtavuori N120
<<locked>>
97%
33257
65%
**54
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36332
71%
**78
99%
[ADI AR 2207]*
<<locked>>
81%
22060
43%
**01
91%
[Accurate 1680]*
<<locked>>
87%
36767
71%
**60
90%
Accurate 5744
<<locked>>
81%
39030
76%
**00
95%
Accurate No. 11 FS
<<locked>>
81%
38754
75%
**87
98%
[Alliant Reloder-7]*
<<locked>>
86%
27586
54%
**06
90%
[IMR 4198]*
<<locked>>
90%
28311
55%
**93
90%
[IMR 4227]*
<<locked>>
81%
29356
57%
**03
94%
[Lovex D060]*
<<locked>>
81%
36608
71%
**54
94%
Lovex D063
<<locked>>
81%
40205
78%
**13
96%
Lovex S053
<<locked>>
81%
27818
54%
**90
97%
[Norma 200]*
<<locked>>
91%
26542
52%
**46
91%
[ReloadSwiss RS 36]*
<<locked>>
81%
27427
53%
**00
93%
SNPE Vectan BA6 1/2
<<locked>>
81%
26701
52%
**88
100%
Shooters World Blackout
<<locked>>
81%
40205
78%
**13
96%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
36608
71%
**54
94%
Vihtavuori N110
<<locked>>
81%
33605
65%
**85
100%
[Vihtavuori N120]*
<<locked>>
81%
21103
41%
**39
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page