Load data for 7 x 72 R + .284 | 180gr | Berger Hybrid Target

7 x 72 R cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:180 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 72 R with .284 | 180gr | Berger Hybrid Target bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-16, Somchem S365 and Accurate 4350.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>90%34,867 psi86%2192 fps96.6%
Alliant Reloder- TS 15.5<<locked>>82%36,027 psi89%2156 fps98.8%
Alliant Reloder-16<<locked>>90%35,824 psi88%2205 fps96.8%
Alliant Reloder-17<<locked>>86%35,346 psi87%2224 fps98.4%
Alliant Reloder-23ᴾ<<locked>>100%34,389 psi85%2208 fps97.9%
Bofors RP3<<locked>>82%35,534 psi88%2159 fps98.8%
Hodgdon H380<<locked>>82%36,448 psi90%2159 fps96.4%
Hodgdon Hybrid 100V<<locked>>92%34,737 psi86%2156 fps98.1%
Hodgdon TrailBossᴾ<<locked>>100%35,157 psi87%1421 fps100%
IMR 4064<<locked>>82%36,129 psi89%2116 fps97.6%
IMR 4831<<locked>>94%34,563 psi85%2169 fps96.6%
Norma URP<<locked>>90%35,810 psi88%2198 fps96.7%
ReloadSwiss RS 14ᴾ<<locked>>100%35,360 psi87%1450 fps100%
ReloadSwiss RS 60<<locked>>84%35,375 psi87%2234 fps99.8%
ReloadSwiss RS 62<<locked>>90%34,940 psi86%2208 fps96.2%
Rottweil R 903<<locked>>84%35,447 psi87%2152 fps98.6%
SNPE Vectan SP 11<<locked>>82%34,519 psi85%2156 fps97.6%
SNPE Vectan Tubal 5000<<locked>>82%36,361 psi90%2067 fps100%
Somchem S355<<locked>>84%36,608 psi90%2159 fps98.6%
Somchem S365<<locked>>94%36,100 psi89%2244 fps99.5%
Vihtavuori N150<<locked>>88%35,201 psi87%2113 fps99.2%
Vihtavuori N160<<locked>>88%36,724 psi90%2178 fps96.8%
Vihtavuori N550<<locked>>86%34,505 psi85%2172 fps96.1%
Vihtavuori N555ᴾ<<locked>>100%36,695 psi90%2274 fps97.9%
Winchester 6.5 StaBALL<<locked>>88%35,491 psi87%2139 fps98.3%
Winchester StaBALL HDᴾ<<locked>>100%30,603 psi75%2192 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 435033.4 gr86%30,560 psi75%2103 fps95.1%
Alliant Reloder- TS 15.5<<locked>>80%33,736 psi83%2110 fps98.3%
Alliant Reloder-1632.5 gr86%31,821 psi78%2113 fps95.2%
Alliant Reloder-17<<locked>>80%29,225 psi72%2080 fps96.1%
Alliant Reloder-23<<locked>>94%28,776 psi71%2073 fps95.6%
Bofors RP3<<locked>>80%33,199 psi82%2113 fps98.3%
Hodgdon H380<<locked>>80%34,142 psi84%2113 fps95.6%
Hodgdon Hybrid 100V<<locked>>84%27,209 psi67%1982 fps95.2%
Hodgdon TrailBoss<<locked>>80%26,223 psi65%1266 fps100%
IMR 4064<<locked>>80%33,852 psi83%2070 fps96.9%
IMR 4831<<locked>>90%30,821 psi76%2087 fps95.1%
Norma URP<<locked>>86%31,430 psi77%2103 fps95%
ReloadSwiss RS 14<<locked>>80%26,498 psi65%1299 fps100%
ReloadSwiss RS 60<<locked>>80%31,154 psi77%2139 fps99.1%
ReloadSwiss RS 62<<locked>>88%32,721 psi81%2162 fps95.3%
Rottweil R 903<<locked>>80%31,241 psi77%2064 fps97.4%
SNPE Vectan SP 11<<locked>>80%32,372 psi80%2110 fps96.9%
SNPE Vectan Tubal 5000<<locked>>80%34,301 psi84%2031 fps100%
Somchem S355<<locked>>80%32,387 psi80%2073 fps97.5%
Somchem S36531.7 gr82%24,932 psi61%1975 fps95.6%
Vihtavuori N150<<locked>>80%27,557 psi68%1955 fps97.3%
Vihtavuori N160<<locked>>84%32,271 psi79%2090 fps95.2%
Vihtavuori N550<<locked>>84%32,372 psi80%2126 fps95.3%
Vihtavuori N555<<locked>>94%30,414 psi75%2139 fps95.7%
Winchester 6.5 StaBALL<<locked>>80%27,369 psi67%1955 fps95.2%
Winchester StaBALL HD<<locked>>98%28,776 psi71%2139 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 180gr | Berger Hybrid Target. Vihtavuori N555 delivers the highest muzzle velocity at 2,274 fps; across all powders the maximum-charge window runs from 1,421 fps to 2,274 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-16, Somchem S365, Accurate 4350 rank at the top here: for 7 x 72 R with the .284 | 180gr | Berger Hybrid Target they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data