Load data for 7 x 72 R + .284 | 175gr | Speer TBBC

7 x 72 R cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:175 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 72 R with .284 | 175gr | Speer TBBC bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-16, Somchem S365 and Accurate 4350.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>90%35,215 psi87%2238 fps96.6%
Alliant Reloder- TS 15.5<<locked>>82%36,347 psi90%2201 fps98.8%
Alliant Reloder-16<<locked>>90%36,201 psi89%2254 fps96.8%
Alliant Reloder-17<<locked>>86%35,636 psi88%2274 fps98.3%
Alliant Reloder-23ᴾ<<locked>>100%34,476 psi85%2254 fps97.8%
Bofors RP3<<locked>>82%35,781 psi88%2205 fps98.8%
Hodgdon H380<<locked>>82%36,695 psi90%2205 fps96.3%
Hodgdon Hybrid 100V<<locked>>92%35,070 psi86%2201 fps98.1%
Hodgdon TrailBossᴾ<<locked>>100%35,157 psi87%1453 fps100%
IMR 4064<<locked>>82%36,260 psi89%2159 fps97.5%
IMR 4831<<locked>>94%34,911 psi86%2215 fps96.5%
Norma URP<<locked>>90%35,853 psi88%2241 fps96.5%
ReloadSwiss RS 14ᴾ<<locked>>100%35,346 psi87%1486 fps100%
ReloadSwiss RS 60<<locked>>84%35,447 psi87%2277 fps99.8%
ReloadSwiss RS 62<<locked>>90%35,114 psi86%2254 fps96.1%
Rottweil R 903<<locked>>84%35,708 psi88%2195 fps98.5%
SNPE Vectan SP 11<<locked>>82%34,708 psi85%2201 fps97.5%
SNPE Vectan Tubal 5000<<locked>>82%36,463 psi90%2110 fps100%
Somchem S355<<locked>>82%34,635 psi85%2162 fps98%
Somchem S365<<locked>>94%36,332 psi89%2290 fps99.5%
Vihtavuori N150<<locked>>88%35,418 psi87%2159 fps99.2%
Vihtavuori N160<<locked>>86%34,519 psi85%2175 fps95.9%
Vihtavuori N550<<locked>>86%34,911 psi86%2221 fps96.1%
Vihtavuori N555<<locked>>98%34,519 psi85%2270 fps97.1%
Winchester 6.5 StaBALL<<locked>>88%35,607 psi88%2182 fps98.3%
Winchester StaBALL HDᴾ<<locked>>100%30,777 psi76%2234 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 435035.2 gr88%32,895 psi81%2192 fps95.8%
Alliant Reloder- TS 15.5<<locked>>80%34,084 psi84%2156 fps98.3%
Alliant Reloder-1633.5 gr86%32,010 psi79%2159 fps95.1%
Alliant Reloder-17<<locked>>80%29,399 psi72%2123 fps96%
Alliant Reloder-23<<locked>>94%28,979 psi71%2119 fps95.5%
Bofors RP3<<locked>>80%33,504 psi83%2159 fps98.2%
Hodgdon H380<<locked>>80%34,447 psi85%2159 fps95.6%
Hodgdon Hybrid 100V<<locked>>84%27,441 psi68%2024 fps95.1%
Hodgdon TrailBoss<<locked>>80%26,165 psi64%1296 fps100%
IMR 4064<<locked>>80%34,040 psi84%2113 fps96.9%
IMR 4831<<locked>>90%30,951 psi76%2129 fps95%
Norma URP<<locked>>88%33,663 psi83%2195 fps95.8%
ReloadSwiss RS 14<<locked>>80%26,426 psi65%1329 fps100%
ReloadSwiss RS 60<<locked>>80%31,328 psi77%2182 fps99%
ReloadSwiss RS 62<<locked>>88%32,967 psi81%2208 fps95.2%
Rottweil R 903<<locked>>80%31,560 psi78%2113 fps97.4%
SNPE Vectan SP 11<<locked>>80%32,343 psi80%2149 fps96.7%
SNPE Vectan Tubal 5000<<locked>>80%34,476 psi85%2077 fps100%
Somchem S355<<locked>>80%32,503 psi80%2116 fps97.4%
Somchem S36532.6 gr82%24,932 psi61%2011 fps95.4%
Vihtavuori N150<<locked>>80%27,731 psi68%1995 fps97.2%
Vihtavuori N160<<locked>>84%32,401 psi80%2129 fps95.1%
Vihtavuori N550<<locked>>84%32,518 psi80%2169 fps95.2%
Vihtavuori N555<<locked>>94%30,647 psi75%2185 fps95.6%
Winchester 6.5 StaBALL<<locked>>80%27,470 psi68%1995 fps95.1%
Winchester StaBALL HD<<locked>>98%28,964 psi71%2182 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 49 powders for 7 x 72 R loaded with the .284 | 175gr | Speer TBBC. Alliant Reloder-26 delivers the highest muzzle velocity at 2,320 fps; across all powders the maximum-charge window runs from 1,453 fps to 2,320 fps. Accurate 3100 gives the best case fill at 100 %, and 49 of the 49 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 72–90 %, leaving at least 10 % headroom. The 175.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 3100, Alliant Reloder-23, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-16, Somchem S365, Accurate 4350 rank at the top here: for 7 x 72 R with the .284 | 175gr | Speer TBBC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2700, Accurate 3100, Bofors RP7 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data