Load data for 7 x 72 R + .284 | 175gr | Sierra MatchKing

7 x 72 R cartridge drawing
Sierra logo

Load Specifications

Bullet Manufacturer:Sierra
Bullet Weight:175 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:10.0

Load data in caliber 7 x 72 R with .284 | 175gr | Sierra MatchKing bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-16, Somchem S365 and Hodgdon Hybrid 100V.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>90%35,012 psi86%2234 fps96.5%
Alliant Reloder- TS 15.5<<locked>>82%36,158 psi89%2198 fps98.7%
Alliant Reloder-16<<locked>>90%36,027 psi89%2251 fps96.8%
Alliant Reloder-17<<locked>>86%35,476 psi87%2270 fps98.3%
Alliant Reloder-23ᴾ<<locked>>100%34,563 psi85%2254 fps97.9%
Bofors RP3<<locked>>82%35,621 psi88%2201 fps98.7%
Hodgdon Hybrid 100V<<locked>>92%34,896 psi86%2198 fps98%
Hodgdon TrailBossᴾ<<locked>>100%35,244 psi87%1453 fps100%
IMR 4064<<locked>>82%36,085 psi89%2156 fps97.5%
IMR 4831<<locked>>94%34,751 psi86%2211 fps96.5%
Norma URP<<locked>>90%35,984 psi89%2244 fps96.6%
ReloadSwiss RS 14ᴾ<<locked>>100%35,418 psi87%1486 fps100%
ReloadSwiss RS 60<<locked>>84%35,549 psi88%2280 fps99.8%
ReloadSwiss RS 62<<locked>>90%35,230 psi87%2257 fps96.1%
Rottweil R 903<<locked>>84%35,795 psi88%2198 fps98.5%
SNPE Vectan SP 11<<locked>>82%34,548 psi85%2195 fps97.4%
SNPE Vectan Tubal 5000<<locked>>82%36,579 psi90%2113 fps100%
Somchem S355<<locked>>84%36,709 psi90%2201 fps98.5%
Somchem S365<<locked>>94%36,143 psi89%2287 fps99.5%
Unknown powder<<locked>>88%36,666 psi90%2241 fps96%
Vihtavuori N150<<locked>>88%35,534 psi88%2162 fps99.2%
Vihtavuori N160<<locked>>86%34,621 psi85%2178 fps96%
Vihtavuori N550<<locked>>86%34,737 psi86%2215 fps96%
Vihtavuori N555<<locked>>98%34,650 psi85%2274 fps97.1%
Winchester 6.5 StaBALL<<locked>>88%35,447 psi87%2178 fps98.2%
Winchester StaBALL HDᴾ<<locked>>100%30,618 psi75%2231 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>88%32,706 psi81%2188 fps95.7%
Alliant Reloder- TS 15.5<<locked>>80%33,910 psi84%2152 fps98.2%
Alliant Reloder-1633.4 gr86%31,865 psi78%2152 fps95%
Alliant Reloder-17<<locked>>80%29,269 psi72%2119 fps95.9%
Alliant Reloder-23<<locked>>94%28,848 psi71%2113 fps95.4%
Bofors RP3<<locked>>80%33,330 psi82%2156 fps98.2%
Hodgdon Hybrid 100V32.5 gr84%27,528 psi68%2028 fps95.2%
Hodgdon TrailBoss<<locked>>80%26,208 psi65%1296 fps100%
IMR 4064<<locked>>80%34,084 psi84%2116 fps96.9%
IMR 4831<<locked>>92%32,822 psi81%2172 fps95.8%
Norma URP<<locked>>86%31,691 psi78%2149 fps95%
ReloadSwiss RS 14<<locked>>80%26,469 psi65%1329 fps100%
ReloadSwiss RS 60<<locked>>80%31,169 psi77%2178 fps99%
ReloadSwiss RS 62<<locked>>88%32,808 psi81%2205 fps95.2%
Rottweil R 903<<locked>>80%31,386 psi77%2106 fps97.3%
SNPE Vectan SP 11<<locked>>80%32,430 psi80%2149 fps96.7%
SNPE Vectan Tubal 5000<<locked>>80%34,258 psi84%2070 fps100%
Somchem S355<<locked>>80%32,561 psi80%2116 fps97.4%
Somchem S36532.6 gr82%25,019 psi62%2014 fps95.5%
Unknown powder<<locked>>86%34,403 psi85%2195 fps95.2%
Vihtavuori N150<<locked>>80%27,557 psi68%1991 fps97.1%
Vihtavuori N160<<locked>>84%32,242 psi79%2126 fps95%
Vihtavuori N550<<locked>>84%32,605 psi80%2169 fps95.2%
Vihtavuori N555<<locked>>94%30,501 psi75%2178 fps95.5%
Winchester 6.5 StaBALL<<locked>>80%27,543 psi68%1998 fps95.1%
Winchester StaBALL HD<<locked>>98%28,863 psi71%2178 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 175gr | Sierra MatchKing. Somchem S365 delivers the highest muzzle velocity at 2,287 fps; across all powders the maximum-charge window runs from 1,453 fps to 2,287 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 175.0 gr projectile in 0.284" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-16, Somchem S365, Hodgdon Hybrid 100V rank at the top here: for 7 x 72 R with the .284 | 175gr | Sierra MatchKing they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data