Load data for 7 x 72 R + .284 | 175gr | Nosler AccuBond Long Range

7 x 72 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:175 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 72 R with .284 | 175gr | Nosler AccuBond Long Range bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Hodgdon Hybrid 100V and Winchester 6.5 StaBALL.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>82%36,042 psi89%2178 fps100%
Accurate 4350<<locked>>92%36,056 psi89%2244 fps96.6%
ADI AR 2208<<locked>>82%35,810 psi88%2146 fps96.9%
Alliant Reloder- TS 15.5<<locked>>82%34,983 psi86%2162 fps98.3%
Alliant Reloder-16<<locked>>90%34,882 psi86%2208 fps96%
Alliant Reloder-17<<locked>>88%36,608 psi90%2280 fps98.3%
Alliant Reloder-23ᴾ<<locked>>100%33,417 psi82%2215 fps97.2%
Bofors RP3<<locked>>82%34,374 psi85%2169 fps98.3%
Hodgdon Hybrid 100V<<locked>>94%35,969 psi89%2208 fps98.1%
Hodgdon TrailBossᴾ<<locked>>100%34,766 psi86%1434 fps100%
IMR 4831<<locked>>92%35,172 psi87%2208 fps96.4%
Norma URP<<locked>>90%34,737 psi86%2205 fps95.9%
Ramshot Big Game<<locked>>82%36,477 psi90%2218 fps97.7%
ReloadSwiss RS 14ᴾ<<locked>>100%35,302 psi87%1473 fps100%
ReloadSwiss RS 60<<locked>>86%36,622 psi90%2287 fps99.8%
ReloadSwiss RS 62<<locked>>92%36,085 psi89%2260 fps96.1%
Rottweil R 903<<locked>>86%36,738 psi90%2205 fps98.6%
SNPE Vectan SP 11<<locked>>84%35,752 psi88%2208 fps97.6%
SNPE Vectan Tubal 5000<<locked>>82%35,389 psi87%2080 fps100%
Somchem S355<<locked>>84%35,563 psi88%2169 fps98.1%
Somchem S365<<locked>>94%34,998 psi86%2251 fps99.1%
Vihtavuori N150<<locked>>86%35,969 psi89%2156 fps99.2%
Vihtavuori N160<<locked>>90%36,521 psi90%2208 fps96.3%
Vihtavuori N550<<locked>>90%35,476 psi87%2205 fps95.9%
Vihtavuori N555ᴾ<<locked>>100%35,418 psi87%2277 fps97.1%
Winchester 6.5 StaBALL<<locked>>90%36,738 psi90%2188 fps98.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>80%33,692 psi83%2133 fps99.9%
Accurate 4350<<locked>>88%31,560 psi78%2152 fps95%
ADI AR 2208<<locked>>80%33,823 psi83%2103 fps96.3%
Alliant Reloder- TS 15.5<<locked>>80%32,982 psi81%2123 fps97.8%
Alliant Reloder-16<<locked>>88%32,996 psi81%2165 fps95.2%
Alliant Reloder-17<<locked>>80%28,442 psi70%2083 fps95.1%
Alliant Reloder-23<<locked>>96%29,747 psi73%2123 fps95.5%
Bofors RP3<<locked>>80%32,140 psi79%2119 fps97.7%
Hodgdon Hybrid 100V32.2 gr86%28,181 psi69%2034 fps95.2%
Hodgdon TrailBoss<<locked>>80%25,860 psi64%1280 fps100%
IMR 4831<<locked>>90%32,938 psi81%2162 fps95.6%
Norma URP<<locked>>88%32,576 psi80%2159 fps95%
Ramshot Big Game<<locked>>80%34,200 psi84%2172 fps97%
ReloadSwiss RS 14<<locked>>80%26,121 psi64%1309 fps100%
ReloadSwiss RS 60<<locked>>80%30,255 psi75%2142 fps98.5%
ReloadSwiss RS 62<<locked>>90%33,837 psi83%2215 fps95.3%
Rottweil R 903<<locked>>80%30,182 psi74%2070 fps96.7%
SNPE Vectan SP 11<<locked>>80%31,444 psi77%2116 fps96.1%
SNPE Vectan Tubal 5000<<locked>>80%33,330 psi82%2044 fps99.9%
Somchem S355<<locked>>80%31,386 psi77%2083 fps96.9%
Somchem S36532.4 gr84%25,788 psi64%2024 fps95.6%
Vihtavuori N150<<locked>>80%29,675 psi73%2028 fps97.7%
Vihtavuori N160<<locked>>88%34,200 psi84%2159 fps95.5%
Vihtavuori N550<<locked>>88%33,257 psi82%2162 fps95.1%
Vihtavuori N555<<locked>>96%31,111 psi77%2182 fps95.5%
Winchester 6.5 StaBALL34.2 gr82%28,543 psi70%2011 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 175gr | Nosler AccuBond Long Range. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,287 fps; across all powders the maximum-charge window runs from 1,434 fps to 2,287 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 82–90 %, leaving at least 10 % headroom. The 175.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Hodgdon Hybrid 100V, Winchester 6.5 StaBALL rank at the top here: for 7 x 72 R with the .284 | 175gr | Nosler AccuBond Long Range they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data