Load data for 7 x 72 R + .284 | 171gr | Barnes Match Burner BT

7 x 72 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:171 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:10.0

Load data in caliber 7 x 72 R with .284 | 171gr | Barnes Match Burner BT bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Hodgdon Hybrid 100V and Winchester 6.5 StaBALL.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>82%36,419 psi90%2221 fps100%
Accurate 4350<<locked>>92%36,695 psi90%2293 fps96.8%
ADI AR 2208<<locked>>82%36,434 psi90%2195 fps97.1%
Alliant Reloder- TS 15.5<<locked>>82%35,563 psi88%2211 fps98.4%
Alliant Reloder-16<<locked>>90%35,491 psi87%2260 fps96.2%
Alliant Reloder-17<<locked>>86%34,882 psi86%2280 fps97.8%
Alliant Reloder-23ᴾ<<locked>>100%33,953 psi84%2264 fps97.3%
Bofors RP3<<locked>>82%34,954 psi86%2215 fps98.4%
Hodgdon Hybrid 100V<<locked>>94%36,535 psi90%2257 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%35,041 psi86%1470 fps100%
IMR 4064<<locked>>82%35,549 psi88%2172 fps97.1%
IMR 4831<<locked>>96%36,318 psi89%2270 fps96.7%
Norma URP<<locked>>90%35,085 psi86%2251 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%35,549 psi88%1506 fps100%
ReloadSwiss RS 60<<locked>>84%34,940 psi86%2290 fps99.6%
Rottweil R 903<<locked>>84%35,172 psi87%2211 fps98.2%
SNPE Vectan SP 11<<locked>>84%36,172 psi89%2254 fps97.6%
SNPE Vectan Tubal 5000<<locked>>82%35,766 psi88%2126 fps100%
Somchem S355<<locked>>84%36,100 psi89%2218 fps98.2%
Somchem S365<<locked>>94%35,491 psi87%2300 fps99.2%
Vihtavuori N150<<locked>>88%34,679 psi85%2172 fps98.9%
Vihtavuori N160<<locked>>88%36,230 psi89%2234 fps96.2%
Vihtavuori N550<<locked>>88%36,332 psi89%2274 fps96.2%
Vihtavuori N555ᴾ<<locked>>100%35,824 psi88%2323 fps97.2%
Winchester 6.5 StaBALL<<locked>>88%34,911 psi86%2192 fps97.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>80%34,156 psi84%2178 fps99.9%
Accurate 4350<<locked>>88%32,010 psi79%2198 fps95.1%
ADI AR 2208<<locked>>80%34,185 psi84%2149 fps96.4%
Alliant Reloder- TS 15.5<<locked>>80%33,373 psi82%2165 fps97.8%
Alliant Reloder-16<<locked>>88%33,359 psi82%2211 fps95.3%
Alliant Reloder-17<<locked>>80%28,819 psi71%2129 fps95.2%
Alliant Reloder-23<<locked>>96%30,110 psi74%2169 fps95.7%
Bofors RP3<<locked>>80%32,764 psi81%2169 fps97.8%
Hodgdon Hybrid 100V33.3 gr86%28,616 psi70%2080 fps95.3%
Hodgdon TrailBoss<<locked>>80%26,049 psi64%1309 fps100%
IMR 4064<<locked>>80%33,634 psi83%2129 fps96.5%
IMR 4831<<locked>>92%32,213 psi79%2182 fps95.2%
Norma URP<<locked>>88%32,895 psi81%2201 fps95.1%
ReloadSwiss RS 14<<locked>>80%26,295 psi65%1342 fps100%
ReloadSwiss RS 60<<locked>>80%30,661 psi76%2188 fps98.6%
Rottweil R 903<<locked>>80%30,850 psi76%2119 fps96.9%
SNPE Vectan SP 11<<locked>>80%31,923 psi79%2162 fps96.2%
SNPE Vectan Tubal 5000<<locked>>80%33,779 psi83%2087 fps100%
Somchem S355<<locked>>80%31,778 psi78%2126 fps96.9%
Somchem S36533.4 gr84%25,976 psi64%2064 fps95.7%
Vihtavuori N150<<locked>>80%27,093 psi67%2005 fps96.7%
Vihtavuori N160<<locked>>86%33,779 psi83%2185 fps95.3%
Vihtavuori N550<<locked>>86%34,113 psi84%2228 fps95.5%
Vihtavuori N555<<locked>>96%31,792 psi78%2234 fps95.8%
Winchester 6.5 StaBALL35.3 gr82%28,761 psi71%2051 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 48 powders for 7 x 72 R loaded with the .284 | 171gr | Barnes Match Burner BT. Alliant Reloder-26 delivers the highest muzzle velocity at 2,326 fps; across all powders the maximum-charge window runs from 1,470 fps to 2,326 fps. Accurate 3100 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 171.0 gr projectile in 0.284" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 3100, Alliant Reloder-23, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Hodgdon Hybrid 100V, Winchester 6.5 StaBALL rank at the top here: for 7 x 72 R with the .284 | 171gr | Barnes Match Burner BT they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 3100, Alliant Reloder-26, Bofors RP7 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data