Load data for 7 x 72 R + .284 | 162gr | Hornady BTHP

7 x 72 R cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:162 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.5

Load data in caliber 7 x 72 R with .284 | 162gr | Hornady BTHP bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Alliant Reloder-17 and Hodgdon Hybrid 100V.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>82%36,724 psi90%2264 fps100%
Accurate 4064<<locked>>82%34,679 psi85%2254 fps99.8%
ADI AR 2208<<locked>>82%34,795 psi86%2221 fps95.8%
Alliant Reloder- TS 15.5<<locked>>84%36,289 psi89%2290 fps98.1%
Alliant Reloder-15<<locked>>82%36,637 psi90%2293 fps96.7%
Alliant Reloder-17<<locked>>88%35,534 psi88%2352 fps97.3%
Bofors RP3<<locked>>84%35,578 psi88%2290 fps98%
Hodgdon Hybrid 100V<<locked>>94%34,940 psi86%2283 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%34,679 psi85%1506 fps100%
IMR 4064<<locked>>82%36,448 psi90%2247 fps96.7%
IMR 4831<<locked>>94%36,245 psi89%2326 fps95.9%
Lovex S062<<locked>>82%36,230 psi89%2257 fps98.4%
Norma 203B<<locked>>82%35,969 psi89%2283 fps97.1%
Ramshot Big Game<<locked>>82%35,288 psi87%2290 fps96.6%
ReloadSwiss RS 14ᴾ<<locked>>100%35,143 psi87%1545 fps100%
ReloadSwiss RS 60<<locked>>86%35,650 psi88%2365 fps99.3%
Rottweil R 903<<locked>>86%35,476 psi87%2280 fps97.7%
Shooters World Precision<<locked>>82%36,230 psi89%2257 fps98.4%
SNPE Vectan SP 11<<locked>>84%34,621 psi85%2280 fps96.5%
SNPE Vectan Tubal 5000<<locked>>84%36,724 psi90%2205 fps100%
Somchem S355<<locked>>84%34,563 psi85%2247 fps97.2%
Somchem S365<<locked>>96%35,984 psi89%2369 fps98.8%
Vihtavuori N150<<locked>>86%34,853 psi86%2231 fps98.5%
Vihtavuori N540<<locked>>82%36,492 psi90%2260 fps99.7%
Vihtavuori N555ᴾ<<locked>>100%33,968 psi84%2343 fps95.8%
Winchester 6.5 StaBALL<<locked>>90%35,824 psi88%2264 fps97.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%34,374 psi85%2221 fps100%
Accurate 4064<<locked>>80%32,532 psi80%2211 fps99.5%
ADI AR 2208<<locked>>80%32,909 psi81%2178 fps95.1%
Alliant Reloder- TS 15.5<<locked>>80%31,865 psi78%2195 fps96.8%
Alliant Reloder-15<<locked>>80%34,374 psi85%2247 fps96%
Alliant Reloder-1735.4 gr84%31,444 psi77%2254 fps95.7%
Bofors RP3<<locked>>80%30,951 psi76%2188 fps96.6%
Hodgdon Hybrid 100V34.9 gr90%30,821 psi76%2188 fps95.5%
Hodgdon TrailBoss<<locked>>80%25,773 psi63%1345 fps100%
IMR 4064<<locked>>80%34,490 psi85%2208 fps96%
IMR 4831<<locked>>92%33,997 psi84%2280 fps95.1%
Lovex S062<<locked>>80%33,968 psi84%2208 fps97.8%
Norma 203B<<locked>>80%33,750 psi83%2238 fps96.4%
Ramshot Big Game<<locked>>80%33,185 psi82%2244 fps95.8%
ReloadSwiss RS 14<<locked>>80%25,976 psi64%1375 fps100%
ReloadSwiss RS 60<<locked>>80%29,443 psi73%2208 fps97.4%
Rottweil R 903<<locked>>80%29,385 psi72%2146 fps95.6%
Shooters World Precision<<locked>>80%33,968 psi84%2208 fps97.8%
SNPE Vectan SP 11<<locked>>82%32,547 psi80%2234 fps95.7%
SNPE Vectan Tubal 5000<<locked>>80%32,460 psi80%2123 fps99.7%
Somchem S355<<locked>>80%30,385 psi75%2152 fps95.7%
Somchem S36534.3 gr86%26,397 psi65%2129 fps95%
Vihtavuori N150<<locked>>80%28,906 psi71%2103 fps96.7%
Vihtavuori N540<<locked>>80%34,287 psi84%2215 fps99.4%
Vihtavuori N555<<locked>>98%32,140 psi79%2300 fps95.1%
Winchester 6.5 StaBALL<<locked>>86%31,372 psi77%2165 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 162gr | Hornady BTHP. Somchem S365 delivers the highest muzzle velocity at 2,369 fps; across all powders the maximum-charge window runs from 1,506 fps to 2,369 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 84–90 %, leaving at least 10 % headroom. The 162.0 gr projectile in 0.284" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori N555 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Alliant Reloder-17, Hodgdon Hybrid 100V rank at the top here: for 7 x 72 R with the .284 | 162gr | Hornady BTHP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data