Load data for 7 x 72 R + .284 | 150gr | Nosler Partition

7 x 72 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:150 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 72 R with .284 | 150gr | Nosler Partition bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Alliant Reloder-17 and Winchester 6.5 StaBALL.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>82%36,463 psi90%2372 fps100%
Accurate 4064<<locked>>82%34,432 psi85%2359 fps99.5%
Alliant Reloder- TS 15.5<<locked>>84%35,882 psi88%2392 fps97.5%
Alliant Reloder-15<<locked>>82%36,535 psi90%2402 fps96.1%
Alliant Reloder-17<<locked>>88%35,592 psi88%2461 fps96.8%
Bofors RP3<<locked>>84%35,288 psi87%2392 fps97.5%
Hodgdon Hybrid 100V<<locked>>94%34,824 psi86%2385 fps96.5%
Hodgdon LEVERevolution<<locked>>82%34,592 psi85%2395 fps97.2%
Hodgdon TrailBossᴾ<<locked>>100%34,780 psi86%1594 fps100%
Hodgdon VARGET<<locked>>82%36,564 psi90%2372 fps97.2%
IMR 3031<<locked>>82%36,651 psi90%2418 fps100%
IMR 4064<<locked>>84%36,027 psi89%2349 fps96%
Lovex S062<<locked>>82%36,013 psi89%2362 fps97.9%
Norma 203B<<locked>>82%35,868 psi88%2392 fps96.6%
Ramshot Big Game<<locked>>82%35,389 psi87%2402 fps96.1%
ReloadSwiss RS 14ᴾ<<locked>>100%35,172 psi87%1634 fps100%
ReloadSwiss RS 60<<locked>>86%35,563 psi88%2474 fps99%
Rottweil R 903<<locked>>86%35,462 psi87%2388 fps97.2%
Shooters World Precision<<locked>>82%36,013 psi89%2362 fps97.9%
SNPE Vectan SP 11<<locked>>84%34,519 psi85%2385 fps95.9%
SNPE Vectan Tubal 5000<<locked>>84%36,550 psi90%2310 fps99.9%
Somchem S355<<locked>>86%36,608 psi90%2395 fps97.3%
Somchem S365<<locked>>96%35,868 psi88%2477 fps98.4%
Vihtavuori N150<<locked>>90%35,099 psi86%2346 fps98.2%
Winchester 6.5 StaBALL<<locked>>90%35,621 psi88%2365 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%34,272 psi84%2329 fps100%
Accurate 4064<<locked>>80%32,401 psi80%2313 fps99.2%
Alliant Reloder- TS 15.5<<locked>>80%31,734 psi78%2297 fps96.2%
Alliant Reloder-15<<locked>>80%34,142 psi84%2349 fps95.3%
Alliant Reloder-1738.5 gr86%33,359 psi82%2405 fps95.8%
Bofors RP3<<locked>>80%30,922 psi76%2293 fps96%
Hodgdon Hybrid 100V<<locked>>92%32,808 psi81%2339 fps95.7%
Hodgdon LEVERevolution<<locked>>80%32,619 psi80%2349 fps96.5%
Hodgdon TrailBoss<<locked>>80%25,788 psi64%1421 fps100%
Hodgdon VARGET<<locked>>80%34,403 psi85%2326 fps96.5%
IMR 3031<<locked>>80%34,374 psi85%2372 fps100%
IMR 4064<<locked>>82%33,881 psi83%2300 fps95.2%
Lovex S062<<locked>>80%33,924 psi84%2316 fps97.3%
Norma 203B<<locked>>80%33,547 psi83%2339 fps95.8%
Ramshot Big Game<<locked>>80%33,170 psi82%2349 fps95.2%
ReloadSwiss RS 14<<locked>>80%25,933 psi64%1457 fps100%
ReloadSwiss RS 60<<locked>>80%29,254 psi72%2306 fps96.7%
Rottweil R 903<<locked>>82%31,082 psi77%2290 fps95.7%
Shooters World Precision<<locked>>80%33,924 psi84%2316 fps97.3%
SNPE Vectan SP 11<<locked>>82%32,329 psi80%2333 fps95%
SNPE Vectan Tubal 5000<<locked>>80%32,285 psi80%2224 fps99.5%
Somchem S355<<locked>>80%30,298 psi75%2251 fps95%
Somchem S36537.3 gr88%27,949 psi69%2270 fps95.1%
Vihtavuori N150<<locked>>82%27,427 psi68%2165 fps95.5%
Winchester 6.5 StaBALL39.5 gr86%31,430 psi77%2264 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 50 powders for 7 x 72 R loaded with the .284 | 150gr | Nosler Partition. Alliant Reloder-26 delivers the highest muzzle velocity at 2,497 fps; across all powders the maximum-charge window runs from 1,594 fps to 2,497 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 50 of the 50 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 70–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.284" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Alliant Reloder-26, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Alliant Reloder-17, Winchester 6.5 StaBALL rank at the top here: for 7 x 72 R with the .284 | 150gr | Nosler Partition they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, Alliant Reloder-16, Alliant Reloder-26 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data